|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed. |
| 4 | Refixing shutters of any description after minor repair exceeding 1.00 Sqm and not exceeding 2.00 Sqm each in same opening, complete all as specified and directed. |
| 5 | Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises, complete all as specified and directed. |
| 6 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness, below or above ground level, complete all as specified and as directed. |
| 7 | Demolition of brick work or stone masonay built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles and removal of debris/rubbish off the premises etc complete all as specified and directed. |
| 8 | Taking up or down steel tubing 15mm dia and connections, complete all as specified and as directed. |
| 9 | Taking up or down steel tubing 20mm dia and connections, including cleaning, complete all as specified and as directed. |
| 10 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and as directed. |
| 11 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 12 | PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified. |
| 13 | Brick work with fly ash (Old Size bricks) sub class 'B' bricks straight or curved on plan, exceeding 6m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and as directed. |
| 14 | All as per Srl item no 13 here-in- above, but for except bricks |
| 15 | 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 16 | 15mm thick rendering cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with WPC finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid for separately. |
| 17 | 10mm thick rendering on fascia / edging / ceiling of chajjas, roof projections etc, making the edges in line, in true shape in CM 1:3 and finishing the surface without using extra cement, complete all as specified and directed. |
| 18 | 15mm thick rendering on brick work or concrete surfaces in CM 1:4 mixed with water proofing compound to sunken portion with proper slope towards outside, finishing cement concrete or brick work surface even and smooth using extra cement, provide 90 micron polythene film duly applying bitumen coating @ 3.00 Kg/Sqm complete all as specified and directed. Note: WPC shall measured and paid for separately. |
| 19 | Supply only liquid water proofing compound, complete all as specified and directed. |
| 20 | S&F for 18 to 20 mm thick prelaminated PVC solid board with acrylic lamination not less 0.50 mm thick one side decorative choice laminate and other side balancing white and with weight of sheet not less than 9kg per sqm as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc complete all as specified and directed. |
| 21 | All as per Srl item no 20 but both side white board without printed. |
| 22 | Repair to old steel window exc 1 sqm but not exc 2.0 sqm including replacement of unserviceable/ damaged hinges, all handles, necessary welding to shutters and chowkhat for making window in serviceable condition, all members grinding to smooth surface and applying two coats of synthetic enamel paint over a coat of red oxide primer to grinded surface, complete all as specified and directed. |
| 23 | Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed. |
| 24 | S&F pressed steel frames for doors/windows of size size 75x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, painted with a shop coat of red oxide primer complete all as specified and directed. |
| 25 | Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed. |
| 26 | S&F Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including 3mm thick sheet plain/ Forsted glass and glazing with oil putty or fixed with bead/ glazxing pins squares n/exec 0.5Sqm in each plane stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.4mm and fixed with stainless steel wire staples including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed. |
| 27 | Pressed steel frames for doors/windows of size size 125x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, with a shop coat of red oxide primer and making good to disturbed area in same finish, complete all as specified and directed. |
| 28 | Pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, with a shop coat of red oxide primer and making good to disturbed area in same finish, complete all as specified and directed. |
| 29 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or galvanized wire staples, complete all as specified & directed. |
| 30 | 35mm thick, 2nd class hardwood (Sal/ Hollock) factory made, plain framed, panelled shutters (one panel only) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified and directed. |
| 31 | S&F 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per section 8 clause 8.20 (a) of SSR Part-I complete all as specified and directed |
| 32 | 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both faces, complete all as specified and as directed. |
| 33 | S & F in repair 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts, complete all as specified and directed. |
| 34 | S & F 5mm thick factory made single extruded WPC board, one side prelaminated sheet for kitchen cabinet/cupboard of density 600 kg /Cum, 90° bent, complete all as specified and directed. |
| 35 | S & F 100mm long, mild steel cold rolled butt hinges, medium weight, complete all as specified and directed. |
| 36 | S & F 200mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 37 | S & F 150mm long, extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 38 | S&F 300mm, ordinary rat tail door sprig for door closer, complete all as specified and directed. |
| 39 | S & F 100mm Hasp and staple, safety type, mild steel , wire type stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 40 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flap when open, complete all as specified and directed. |
| 41 | S & F Floor door stopper of aluminium alloy body and tongue, anodised, 150mm length of cover plate with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 42 | 3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 43 | 3mm thick figured/frosted glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 44 | S & F in repair 20mm bore stainless steel, single curtain/drapery rod (wall thickness not less than 1mm) including fancy type Stainless Steel brackets, fenials etc suitable for single curtain rod, fixed in repair, complete all as specified and directed. |
| 45 | PCC type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed. |
| 46 | Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement over 15mm thick screed bed or bedding layer of mortar in CM 1:4 and dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding (but not backing), rubish off the premises, complete all as specified and directed. |
| 47 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement laid over 15m thick screed bed or bedding layerof mortar in CM (1:4) and dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding (but not backing), rubish off the premises, complete all as specified and directed.complete all as specified and directed. |
| 48 | Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.09 sqm but not exceeding 0.16 sqm in floors and skirting etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement over 10mm thick screed bed or bedding layer of mortar in CM 1:4 and dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding (but not backing), rubish off the premises, complete all as specified and directed. |
| 49 | Glazed ceramic coloured tiles 450mm x 300mm x 7mm thick as in vertical surfaces such as skirting, dado etc set and jointed joint free in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles and dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises, complete all as specified and directed. |
| 50 | 18 to 20mm thick bhaislana zebra black marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including dismentling and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, complete all as specified and directed. |
| 51 | Round chamfering to the edges of marble n.exc 15mm wide on shelves complete all as specified & directed. |
| 52 | Steel water tubing, 15mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed |
| 53 | Refixing of old steel tubing 15mm bore and connection in old or new position (walls, ceiling or floors etc.) with new all fittings short pieces, complete all as specified and directed. |
| 54 | Steel water tubing, 20mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 55 | Refixing of old steel tubing 20mm bore and connection in old or new position (walls, ceiling or floors etc.) with new all fittings short pieces, complete all as specified and directed. |
| 56 | Cutting chases for concealed water tubing, making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth, complete all as specified and directed. |
| 57 | 15mm bore bib tap, long nose, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule (fixed in repairs),complete all as specified and directed. |
| 58 | 15mm bore stop valve/angel valve, chromium plated cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union (fixed in repairs), complete all as specified and directed. |
| 59 | 15mm bore concealed type stop valve/angel valve, chromium plated cast copper alloy with long shank and cup, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union (fixed in repairs), complete all as specified and directed. |
| 60 | 15mm bore pillar tap, copper alloy with capstan head, chromium plated screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe (fixed in repairs), complete all as specified and directed. |
| 61 | S&F in repairs 20 mm size gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixed cast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and directed. |
| 62 | S&F in repairs 20mm bore Ball brass valves (as per sample), high pressure with polythene float and flynut complete, screwed down for iron pipe fixed, complete all as specified and directed. |
| 63 | S & F vitreous china, wash hand basin, white, flat back, of size 550mmx400mm with brackets including cutting for and pinning in ends of brackets, complete all as specified or erecting stand including 32mm full threaded waste coupling and 32mm PVC waste pipe, complete all as specified and directed. |
| 64 | S & F in repair vitreous china squatting pan water closet, orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, front or back inlet and foot rests, any pattern including cement concrete bedding, complete all as specified and directed. |
| 65 | S & F vitreous china wash down water closet pan \\"Pedestal\\" coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices & making good to floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated, complete all as specified and directed. |
| 66 | S & F 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets including 32mm dia PVC flush pipe of suitable size and making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed. |
| 67 | PVC connection 15mm size with PTMT nuts at both ends of length 450mm for hot and cold water, complete all as specified and directed. |
| 68 | 32mm dia PVC waste pipe for wash hand basin, urinal and kitchen sinks, fixed in repair, complete all as specified and directed. |
| 69 | 32mm dia CP waste coupling (half or full threaded), fixed in repair, complete all as specified and directed. |
| 70 | 15mm dia disc spindle, fixed in repair, complete all as specified and directed. |
| 71 | Plastic water closet seat cover for EWC pan, white of standard quality and mild steel chromium plated or aluminised hinging device, fixed in repair, complete all as specified and directed. |
| 72 | Rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismanting of water tanks of capacity 1000 ltrs and removing to store, complete all as specified and directed. |
| 73 | Rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismanting of water tanks of capacity exc 250 ltrs but not exc 500 ltrs and removing to store, complete all as specified and directed., complete all as specified and directed. |
| 74 | Sinks with drainage board made of 1mm thick stainless steel kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repair, complete all as specified and directed. |
| 75 | Stainless steel kitchen plate rack of size 750 x 900mm not less than 1mm thick sheet thickness of approved make fixed with mild steel screw, fixed in repair, complete all as specified and directed. |
| 76 | Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges (fixed in repair), complete all as specified and as directed. |
| 77 | 125mm size brass chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe of 15mm dia or union, complete all as specified and as directed. |
| 78 | 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or BWP commercial plywood and fixed to wooden plugs/PVC rawl plug with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 79 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, fixed in repair, complete in all respect as specified and directed. |
| 80 | PVC Lid for water tank of Capacity 500 Ltr to 1000 Ltr, fixed in repairs, complete all as specified and directed. |
| 81 | 100mm dia stainless steel grating, complete all as specified and directed. |
| 82 | 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls or in floors with and including clamps complete all as specified and directed. |
| 83 | 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints,fixed to walls or in floors with and including clamps complete all as specified and directed. |
| 84 | S&F in repair 110mm bore dia PVC (SWR) bends any radiurs (larger bore measured), complete all as specified and directed. |
| 85 | 75mm bore dia PVC (SWR) bends, any radiurs (larger bore measured), complete all as specified and directed. |
| 86 | 110mm dia PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), fixed in repairs, complete all as specified and directed. |
| 87 | 75mm dia PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), fixed in repairs, complete all as specified and directed. |
| 88 | Preparation of old painted steel or iron surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 89 | Preparation of new steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 90 | Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash,complete all as specified and directed. |
| 91 | Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash,complete all as specified and directed. |
| 92 | Complete removal of existing treatment from wall surfaces plastered or unplastered and applying two coats of white wash, complete all as specified and directed. |
| 93 | Complete removal of existing treatment from ceiling surfaces and applying two coats of white wash, complete all as specified and directed. |
| 94 | M&L for preparation of new plastered surface of external wall and chajjas, making surface smooth using sand paper, priming the surface with alkali resistance primer paint for external surface, applying two coats of cement base paint including curing complete all as specified & directed. |
| 95 | M&L for preparation of new surface of wall by applying 2mm thick wall care putty and making the surface even and smooth and applying two coats of oil emulsion distemper complete all as specified & directed. |
| 96 | M&L for preparation of old surface after complete removal of existing treatement applying 2mm thick wall care putty and making the surface even and smooth and applying two coats of oil emulsion distemper complete all as specified & directed. |
| 97 | M&L for complete removal of old existing treatment including prepration of plaster and unplaster surface of wall external wall, chajja, fasca, etc applying two coats of cement base paint any shade or colour as approved complete all as specified and directed. |
| 98 | Preparation of old painted wood or wood based surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 99 | Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. Please Enable Macros to View BoQ information |
