|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed. |
| 4 | Taking down shutter 1 Sqm to 2 Sqm and refixing in same opening safely, (including minor repairs ) complete all as specified and directed. |
| 5 | Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises, complete all as specified and directed. |
| 6 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness, below or above ground level, complete all as specified and as directed. |
| 7 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for( reinforcement cut as required to facilitate demolition) and rubbish off the premises, complete all as specified and directed. |
| 8 | Demolition of brick work or stone masonay built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles and removal of debris/rubbish off the premises etc complete all as specified and directed. |
| 9 | Taking up or down steel tubing 15mm dia and connections, complete all as specified and as directed. |
| 10 | Taking up or down steel tubing 20mm dia and connections, including cleaning, complete all as specified and as directed. |
| 11 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and as directed. |
| 12 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 13 | PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified. |
| 14 | Brick work with fly ash (Old Size bricks) sub class 'B' bricks straight or curved on plan, exceeding 6m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and as directed. |
| 15 | All as per Srl item no 14 here-in- above, but for except bricks |
| 16 | 5mm thick rendering on concrete surface of ceiling, chajjas etc. in CM 1:3 finishing the surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 17 | 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 18 | 15mm thick rendering cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with WPC finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid for separately. |
| 19 | 10mm thick rendering on fascia / edging / ceiling of chajjas, roof projections etc, making the edges in line, in true shape in CM 1:3 and finishing the surface without using extra cement, complete all as specified and directed. |
| 20 | 15mm thick rendering on brick work or concrete surfaces in CM 1:4 mixed with water proofing compound to sunken portion with proper slope towards outside, finishing cement concrete or brick work surface even and smooth using extra cement, provide 90 micron polythene film duly applying bitumen coating @ 3.00 Kg/Sqm complete all as specified and directed. Note: WPC shall measured and paid for separately. |
| 21 | M&L for PCC 1:2:4 type B-0 ( using 12.5mm graded crushed stone aggregate) padding as roof mixed with WPC as per manufacturer's instruction, surface finished even and smooth without using extra cement complete all as specified and directed.Note: WPC shall be measured and paid for separately. |
| 22 | M&L 20 mm thick cement plaster in cement mortar 1:4 on brick or concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified & directed (WPC shall be measured and paid separately) |
| 23 | Supply only liquid water proofing compound, complete all as specified and directed. |
| 24 | Material and labour for preparation of surfaces and apply first of coat Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110, having minimum elongation of 350%, tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5mm and shall resist 10 bars of hydrostatic pressure & reduce surface temperature upto 10 degree Celsius with 33% dilution of priming coat. Laying of fiber mesh of 0.3mm thickness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50mm and allow it to dry. Apply second of undiluted coat @ 0.45 ltr/sqm. Apply third and final coat undiluted @0.45ltr/sqm complete application to be done by the manufacture or authorised applicator complete all as specified and directed by Engr-in-Charge. |
| 25 | Repair to old steel window exc 1 sqm but not exc 1.50 sqm including replacement of unserviceable/ damaged hinges, all handles, necessary welding to shutters and chowkhat for making window in serviceable condition, all members grinding to smooth surface and applying two coats of synthetic enamel paint over a coat of red oxide primer to grinded surface, complete all as specified and directed. |
| 26 | Repair to old steel window exc 1.50 sqm but not exc 4.0 sqm including replacement of unserviceable/ damaged hinges, all handles, necessary welding to shutters and chowkhat for making window in serviceable condition, all members grinding to smooth surface and applying two coats of synthetic enamel paint over a coat of red oxide primer to grinded surface, complete all as specified and directed. |
| 27 | Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed. |
| 28 | S&F Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed. |
| 29 | Pressed steel frames for doors/windows of size size 125x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, with a shop coat of red oxide primer and making good to disturbed area in same finish, complete all as specified and directed. |
| 30 | Pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, with a shop coat of red oxide primer and making good to disturbed area in same finish, complete all as specified and directed. |
| 31 | 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both faces, complete all as specified and as directed. |
| 32 | S&F 2nd class hard wood 35mm thick glazed and skeleton door shutters factory made, open rebated and prepared to receive glass or gauge etc with rounded, chamfered or mitred sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads and fitted to chowkats for securing glass/gauge, size of stiles rails and other parts as per section 8 clause 8.20 (a) of SSR Part-I(Larger size to be provided) complete all as specified and directed |
| 33 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out M.S. tubes for top and bottom rails. MS frame shall be covered with heat moulded wood grain printed PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable size PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame as per specification & drawing or (as per sample) complete all as specified and directed. |
| 34 | S & F in repair 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts, complete all as specified and directed. |
| 35 | S & F in repair factory made 18 to 20mm thick prelaminated PVC solid board with acryllic lamination one side decorative choice lamination and other side balancing white lamination as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc,complete all as specified and directed. |
| 36 | S & F 100mm long, mild steel cold rolled butt hinges, medium weight, complete all as specified and directed. |
| 37 | S & F 200mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 38 | S & F 150mm long, extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 39 | S & F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 40 | S & F in repair 100mm long Hasp and staple, safety type, mild steel , wire type stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 41 | Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 42 | S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples (fixed in repair),complete all as specified and directed. |
| 43 | 3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 44 | S&F 3mm thick frost glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares not exc 0.50 Sqm in each pane complete all as specified and directed. |
| 45 | S&F Continuous (piano) hinges, 30mm width of flaps (when open) mild steel, bright finish or electrogalvanised (as per sample) complete all as specified and directed. |
| 46 | S & F in repair 20mm bore stainless steel, single curtain/drapery rod (wall thickness not less than 1mm) including fancy type PVC brackets, fenials etc suitable for single curtain rod, fixed in repair, complete all as specified and directed. |
| 47 | MS TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed. |
| 48 | MS TMT bars 6-8mm dia and over cut to length, bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed. |
| 49 | Precast reinforced cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articleswith plain faces set in CM 1:6 including necessary moulds/formwork, complete all as specified and directed. Note :- Reinforcement shall be measured and paid seperately under respective items. |
| 50 | Breaking/dismantling, cleaning of loose concrete, replacement of corressive reinforcement, filling plain cement concrete 1:1.5:3 type-A0 using 12.50mm graded crushed stone aggregate using approved bonding chemical at places like chajja, sunshades, roof projection, fascia, beams, columns etc including necessary scafolding, formwork etc complete all as specified and directed. Note :- Reinforcement steel shall be measured and paid for seperately. |
| 51 | PCC type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed. |
| 52 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.36 sqm in floor, skirting etc set and jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed or bedding layer of mortar in CM 1:4 inculidng dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises, complete all as specified and directed. |
| 53 | Glazed ceramic coloured tiles 600mm x 300mm x 7mm or 450x300x7mm thick set and jointed in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles and dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises, complete all as specified and directed. |
| 54 | 18 to 20mm thick bhaislana zebra black marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including dismentling and pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, complete all as specified and directed. |
| 55 | Round chamfering to the edges of marble n.exc 15mm wide on shelves complete all as specified & directed. |
| 56 | Steel water tubing, 15mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed |
| 57 | Refixing of old steel tubing 15mm bore and connection in old or new position (walls, ceiling or floors etc.) with new all fittings short pieces, complete all as specified and directed. |
| 58 | Steel water tubing, 20mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 59 | Refixing of old steel tubing 20mm bore and connection in old or new position (walls, ceiling or floors etc.) with new all fittings short pieces, complete all as specified and directed. |
| 60 | Cutting chases for concealed water tubing, making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth, complete all as specified and directed. |
| 61 | 15mm bore bib tap, long nose, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule (fixed in repairs),complete all as specified and directed. |
| 62 | 15mm bore stop valve/angel valve, chromium plated cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union (fixed in repairs), complete all as specified and directed. |
| 63 | 15mm bore concealed type stop valve/angel valve, chromium plated cast copper alloy with long shank and cup, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union (fixed in repairs), complete all as specified and directed. |
| 64 | 15mm bore pillar tap, copper alloy with capstan head, chromium plated screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe (fixed in repairs), complete all as specified and directed. |
| 65 | S&F in repair 20mm bore dia gun metal globe or gate valves (as per sample) cast copper alloy chromium plated fancy type, ISI marked with crutch or butter fly handleswith iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 66 | S&F in repair towel rail, brass, CP 600 mm long complete all as specified and directed. |
| 67 | S & F in repair CP Shower rose with or without swivel joints, (any size) including fixing to steel pipe or union complete all as specified & directed. |
| 68 | S & F in repair vitreous china, wash hand basin, white, flat back, of size 550mmx400mm with brackets including cutting for and pinning in ends of brackets, complete all as specified or erecting stand including 32mm full threaded waste coupling and 32mm PVC waste pipe, complete all as specified and directed. |
| 69 | S & F in repair vitreous china squatting pan water closet, orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, front or back inlet and foot rests, any pattern including cement concrete bedding, complete all as specified and directed. |
| 70 | S & F in repairs vitreous china wash down water closet pan \\"Pedestal\\" coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices & making good to floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated, complete all as specified and directed. |
| 71 | S & F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets including 32mm dia PVC flush pipe of suitable size and making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed. |
| 72 | PVC connection 15mm size with PTMT nuts at both ends of length 450mm for hot and cold water, complete all as specified and directed. |
| 73 | 32mm dia PVC waste pipe for wash hand basin, urinal and kitchen sinks, fixed in repair, complete all as specified and directed. |
| 74 | S&F in repair 32mm dia CP waste coupling (half or full threaded), fixed in repair, complete all as specified and directed. |
| 75 | S&F in repair 15mm dia disc spindle complete all as specified and directed. |
| 76 | Plastic water closet seat cover for EWC pan, white of standard quality and mild steel chromium plated or aluminised hinging device, fixed in repair, complete all as specified and directed. |
| 77 | S&F in repair PTMT corner sheleves assembly size not less than 300x300x70m brackes double gruard and railing complete all as specified and direted. |
| 78 | Rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismanting of water tanks of capacity exc 250 ltrs but not exc 500 ltrs, complete all as specified and directed., complete all as specified and directed. |
| 79 | Sinks with drainage board made of 1mm thick stainless steel kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 80 | Stainless steel kitchen plate rack of size 750 x 900mm not less than 1mm thick sheet thickness of approved make fixed with mild steel screw, fixed in repair, complete all as specified and directed. |
| 81 | 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or BWP commercial plywood and fixed to wooden plugs/PVC rawl plug with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 82 | S&F in repair health foucet hand shower of min wt of 280 gms (as per sample) including 8mm dia 1m long flexible hook and wall hook complete all as specified and directed. |
| 83 | S&F in repair Sheet glass shelf assembly 12cm wide consisting of 5.5mm thick glass with CP bracket guard and railing 60cm long including chromium plated brass screws and wooden or plastic cleats, complete all as specified and directed. |
| 84 | S&F in repair Corner glass shelf assembly consisting of 5.5mm thick sheet glass size not less then 300x300x70mm with chromium plated brackets double guard and railing including chromium plated brass screws and wooden or plastic cleats complete all as specified and directed. |
| 85 | S&F in repair grating crockroch100 mm dia of SS complete all as specified & directed. |
| 86 | S&F in repair Stainless Steel toilet paper holder with with lid and flash recessed type fixed with stainless steel screws complete all as specified and directed. |
| 87 | Cleaning of water tank of capacity 500 litres to 1000 litres at existing position (at roof slab/ staging of single/double/triple story bldg), emptying stored water through wash outlet, cleaning and removing all sludge, scale and dirt, etc. from tanks and from the mouths of circulating pipes, washing the internal surfaces with bleaching powder including writing the date of cleaning on tank with white/black synthetic enamel paint in prescribed manner, complete all as specified and directed. |
| 88 | Cleaning of water tank of capacity 250 litres to 500 litres at existing position (at roof slab/ staging of single/double/triple story bldg), emptying stored water through wash outlet, cleaning and removing all sludge, scale and dirt, etc. from tanks and from the mouths of circulating pipes, washing the internal surfaces with bleaching powder including writing the date of cleaning on tank with white/black synthetic enamel paint in prescribed manner, complete all as specified and directed. |
| 89 | PVC Lid for water tank of Capacity 500 Ltr to 1000 Ltr, fixed in repairs, complete all as specified and directed. |
| 90 | S&F in repair 20mm dia ball brass valves, high pressure with brass rod & high density polythene float and flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 91 | PVC cabinet, 510x490x100mm with looking mirror, full openable door, fixed in repair, complete all as specified & directed. |
| 92 | 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 93 | 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 94 | 110mm bore dia PVC (SWR) reducers, complete all as specified and directed. |
| 95 | S&F PVC (SWR) cast iron 75mm bore Branch pieces, double (DOUBLE Y), (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, fitted with ovel access doors, fixed in repair complete all as specified and directed. |
| 96 | S&F in repair 110mm bore pipe PVC (SWR) vent cowl and fixed, complete all as specified and directed. |
| 97 | S&F in repair 75mm bore pipe PVC (SWR) vent cowl and fixed, complete all as specified and directed. |
| 98 | 110mm bore dia PVC (SWR) bends, complete all as specified and directed. |
| 99 | 75mm bore dia PVC (SWR) bends, complete all as specified and directed. |
| 100 | S&F in repair 110mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), fixed in repairs, complete all as specified and directed. |
| 101 | S&F in repair 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), fixed in repairs, complete all as specified and directed. |
| 102 | M&L for three coats of white wash on surface of wall including preparation of new plastered surface complete all as specified and as directed. |
| 103 | M&L for three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and as directed. |
| 104 | M&L for preparation old steel or iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 105 | M&L for preparation of old surface complete removal of existing treatment and applying one coats wall care putty over one coat of primer and making surface even and smooth and applying two coats of oil emulshion distemper on old surface of internal wall surface complete all as specified & directed. |
| 106 | M&L for complete removal of old existing treatment including preparation of plaster/unplaster surfaces of walls, chajja, fascia etc and applying two coat of exteior emulsion paint (weather coat) over a coa of primer any shade or colour complete all as specified and directed. |
| 107 | M&L two caot of white wash on surface of wall including preparation of old plastered surface after complete remvoal of existing treatment complete all as specified & directed |
| 108 | M&L two caot of white wash on surface of ceiling including preparation of old plastered surface complete all as specified & directed |
| 109 | M&L for preparation of new plastered surface of external wall and chajjas, making surface smooth using sand paper, priming the surface with alkali resistance primer paint for external surface, applying two coats of cement base paint including curing complete all as specified & directed. |
| 110 | M&L for Preparation of new plastered surfaces of walls, applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth, applying wall care putty to desired even and smooth and levelled surfaces (any thickness) and applying two coats of oil emulsion distemper on walls over a coat of primer complete all as specified and directed. |
| 111 | Preparation of old painted wood or wood based surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 112 | Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 113 | Writing Bldg & Qtr No letter or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete. The colour of paint and dimension of letter shall be used as approved by the Engr-In-Charge. |
| 114 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. Please Enable Macros to View BoQ information |
