|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed. |
| 4 | Refixing shutters of any description after minor repair exceeding 1.00 Sqm and not exceeding 2.00 Sqm each in same opening, complete all as specified and directed. |
| 5 | Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises, complete all as specified and directed. |
| 6 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness, below or above ground level, complete all as specified and as directed. |
| 7 | Demolition of brick work or stone masonay built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles and removal of debris/rubbish off the premises etc complete all as specified and directed. |
| 8 | Taking up or down steel tubing 15mm dia and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 9 | Taking up or down steel tubing 20mm dia and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 10 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed. |
| 11 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 12 | M&L for of Brass CP suitable for sink centre hot & cold water (as per sample) screwed down for 15mm bore dia of pipe & 450mm long iron pipe and fixed cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 13 | PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified. |
| 14 | Brick work with fly ash (Old Size bricks) sub class 'B' bricks straight or curved on plan, exceeding 6m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and as directed. |
| 15 | 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6 finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 16 | 15mm thick rendering cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with WPC finished even and smooth without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid for separately. |
| 17 | 10mm thick rendering on fascia / edging / ceiling of chajjas, roof projections etc, making the edges in line, in true shape in CM 1:3 and finishing the surface without using extra cement, complete all as specified and directed. |
| 18 | 15mm thick rendering on brick work or concrete surfaces in CM 1:4 mixed with water proofing compound to sunken portion with proper slope towards outside, finishing cement concrete or brick work surface even and smooth using extra cement, provide 90 micron polythene film duly applying bitumen coating @ 3.00 Kg/Sqm complete all as specified and directed. Note: WPC shall measured and paid for separately. |
| 19 | Supply only liquid water proofing compound, complete all as specified and directed. |
| 20 | Repair to old steel window exc 1 sqm but not exc 2.0 sqm including replacement of unserviceable/ damaged hinges, all handles, necessary welding to shutters and chowkhat for making window in serviceable condition, all members grinding to smooth surface and applying two coats of synthetic enamel paint over a coat of red oxide primer to grinded surface, complete all as specified and directed. |
| 21 | Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed. |
| 22 | Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed. |
| 23 | Powder coated anodised aluminium door frame of section 101.60x44.45x1.60mm including powder coated anodised aluminium glazed door shutters (minimum thickness of powder coating 50 micron) having stile and top rail, lock rail and bottom rails of section 83.50x45mm, thickness of aluminium sections weighing not less than 0.588 kg/m having grooves for aluminium beading including necessary joining cleats, glazing clips, rubber neoprene packing, 125mm long stainless steel butt hinges- 03 Nos, 150mm long aluminium, anodised, barrel tower bolts of extruded section - 02 Nos, 300mm long aluminium alloy handles - 2 Nos, mortice lock, vertical type, size 65mm 4 levers-01 No, aluminium (extruded section) door closer hydraulically regulated designation No-3 , universal type , suitable foor door shutters of 851 to 1200mm in width and of weight between 61 to 80 kg-01 No and 5.5mm thick sheet glass in each door and anodised aluminum snap beading screws etc., complete all as specified and directed. |
| 24 | Powder coated anodised aluminium window frame three tracker sliding of section 101.60x44.45x1.60mm including openable powder coated anodised aluminium glazed window shutters (minimum thickness of powder coating 50 micron) with a provn of AC and aluminium grills having stile of section 49.910x44.45mm, thickness of aluminium sections weighing not less than 0.588 kg/m having grooves for aluminium beading lator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long-1 No, hinges type B-21 100mm long-2 No. suitable handle-1 No and 5.5mm thick sheet glass in each window, complete all as specified and directed. |
| 25 | Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including 3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 and making good to disturbed area in same finish, complete all as specified and directed. |
| 26 | Pressed steel frames for doors/windows of size size 125x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, with a shop coat of red oxide primer and making good to disturbed area in same finish, complete all as specified and directed. |
| 27 | Pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, with a shop coat of red oxide primer and making good to disturbed area in same finish, complete all as specified and directed. |
| 28 | 35mm thick, 2nd class hardwood (Sal/ Hollock) factory made, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified and directed. |
| 29 | 35mm thick, 2nd class hardwood (Sal/ Hollock) factory made glazed and skeleton shutters, open rebated and prepared to receive glass or gauge,etc. with sash bars, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and directed. |
| 30 | S&F in repair 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts, complete all as specified and directed. |
| 31 | S&F in repair 18 to 20mm thick prelaminated PVC solid board with acrylic lamination interior grade, prelaminated with one side decorative choice lamination and other side balancing white lamination as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc,complete all as specified and directed. |
| 32 | S&F in repair 18 to 20mm thick prelaminated PVC solid board with acrylic lamination, interior grade, both sides prelaminated with white lamination as in kitchen cabinet, cupboard etc fixed with screws to steel/timber frame work etc,complete all as specified and directed. |
| 33 | 5mm thick factory made single extruded WPC board, one side prelaminated sheet for kitchen cabinet/cupboard of density 600 kg /Cum, 90° bent, complete all as specified and directed. |
| 34 | S&F in repair 100mm long, mild steel cold rolled butt hinges, medium weight, complete all as specified and directed. |
| 35 | S&F in repair 200mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 36 | S&F in repair 150mm long, stainless steel brignt finish handle fixed with nut and bolt /screws, complete all as specified and directed |
| 37 | S&F in repair 150mm long, extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 38 | S&F in repair 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 39 | Hasp and staple, safety type, mild steel , wire type stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 40 | Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flap when open, complete all as specified and directed. |
| 41 | Floor door stopper of aluminium alloy body and tongue, anodised, 150mm length of cover plate with hard drawn steel spring, fixed in floor, complete all as specified and directed. |
| 42 | S&F in repair Telescopic type side channel of drawer of standard size including roller for moving drawer made out of mild steel bright finish or electro-galvanised (soft close ball bearing runners) with width of flap 30mm & 60mm long complete all as specified and directed. |
| 43 | Stainless steel, 304 grade heavy duty, plain basket of size 17''x20''x6'', complete all as specified and directed. |
| 44 | Stainless steel, 304 grade heavy duty, partition basket of size 17''x20''x6'', complete all as specified and directed. |
| 45 | Stainless steel, 304 grade heavy duty, cutlery tray of size 17''x20''x6'', complete all as specified and directed. |
| 46 | Stainless steel, 304 grade heavy duty, cup & saucer tray of size 17''x20''x4'', complete all as specified and directed. |
| 47 | Stainless steel, 304 grade heavy duty, plate basket of size 17''x20''x6'', complete all as specified and directed. |
| 48 | Stainless steel, 304 grade heavy duty auto zero crank hinges, fancy type with concealed pattern, fitted to shutters complete all as specified and directed. |
| 49 | Magnetic catcher for shutter of approved pattern fitted with suitable screws, complete all as specified and directed. |
| 50 | Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples (fixed in repair),complete all as specified and directed. |
| 51 | S&F in repair 3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 52 | S&F in repair 3mm thick figured/frosted glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 53 | S&F in repair 20mm bore stainless steel, single curtain/drapery rod (wall thickness not less than 1mm) including fancy type PVC brackets, fenials etc suitable for single curtain rod, fixed in repair, complete all as specified and directed. |
| 54 | Breaking/dismantling, cleaning of loose concrete, replacement of corressive reinforcement, filling plain cement concrete 1:1.5:3 type-A0 using 12.50mm graded crushed stone aggregate using approved bonding chemical at places like chajja, sunshades, roof projection, fascia, beams, columns etc including necessary scafolding, formwork etc complete all as specified and directed. Note :- Reinforcement steel shall be measured and paid for seperately. |
| 55 | PCC type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed. |
| 56 | Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement over 15mm thick screed bed or bedding layer of mortar in CM 1:4 and dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding (but not backing), rubish off the premises, complete all as specified and directed. |
| 57 | Glazed ceramic coloured tiles 450mm x 300mm x 7mm thick as in vertical surfaces such as skirting, dado etc set and jointed joint free in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles and dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises, complete all as specified and directed. |
| 58 | 10mm thick vitrified tiles, light shade (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc. set and jointed joint free in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:4 to recieve the tiles and dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises, complete all as specified and directed. |
| 59 | 10mm thick vitrified tiles, light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm as in vertical surfaces such as skirting dado etc set and jointed joint free in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles and dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises, complete all as specified and directed. |
| 60 | 18 to 20mm thick bhaislana zebra black marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including dismantling old complete all as specified and directed. |
| 61 | Round chamfering to the edges of marble n.exc 15mm wide on shelves complete all as specified & directed. |
| 62 | Steel water tubing, 15mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed |
| 63 | Refixing of old steel tubing 15mm bore and connection in old or new position (walls, ceiling or floors etc.) with new all fittings short pieces, complete all as specified and directed. |
| 64 | Steel water tubing, 20mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 65 | Refixing of old steel tubing 20mm bore and connection in old or new position (walls, ceiling or floors etc.) with new all fittings short pieces, complete all as specified and directed. |
| 66 | Cutting chases for concealed water tubing, making good to facing where required, pointing in CM 1:3, cutting n.exc. 10cm in girth, complete all as specified and directed. |
| 67 | 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed in repair, complete all as specified and as directed. |
| 68 | 15mm bore bib tap, long nose, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule (fixed in repairs),complete all as specified and directed. |
| 69 | 15mm bore stop valve/angel valve, chromium plated cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union (fixed in repairs), complete all as specified and directed. |
| 70 | 15mm bore concealed type stop valve/angel valve, chromium plated cast copper alloy with long shank and cup, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union (fixed in repairs), complete all as specified and directed. |
| 71 | 15mm bore pillar tap, copper alloy with capstan head, chromium plated screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe (fixed in repairs), complete all as specified and directed. |
| 72 | Supply, fixing, jointing and testing, 20mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed in repair, complete all as specified and directed. |
| 73 | Brass CP centre hole basin mixer (single lever) for mixing hot & cold water screwed down for 15mm bore dia of pipe & 450mm long iron pipe and fixed cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repair, complete all as specified and directed. |
| 74 | Wall mixer with overhead brass chromium plated telescopic shower rose 125mm size for mixing hot & cold water screwed down for 15mm bore dia of pipe with or without swivel joints and fixed in repair, complete all as specified and directed. |
| 75 | S & F in repair vitreous china, wash hand basin, white, flat back, of size 550mmx400mm with brackets including cutting for and pinning in ends of brackets, complete all as specified or erecting stand including 32mm full threaded waste coupling and 32mm PVC waste pipe, complete all as specified and directed. |
| 76 | S & F in repairs vitreous china wash down water closet pan \\"Pedestal\\" coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices & making good to floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated, complete all as specified and directed. |
| 77 | S & F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets including 32mm dia PVC flush pipe of suitable size and making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed. |
| 78 | S&F in repair PVC connection 15mm size with PTMT nuts at both ends of length 450mm for hot and cold water, complete all as specified and directed. |
| 79 | S&F in repair 32mm dia PVC waste pipe for wash hand basin, urinal and kitchen sinks, fixed in repair, complete all as specified and directed. |
| 80 | 32mm dia CP waste coupling (half or full threaded), fixed in repair, complete all as specified and directed. |
| 81 | 15mm dia disc spindle, fixed in repair, complete all as specified and directed. |
| 82 | Plastic water closet seat cover for EWC pan, white of standard quality and mild steel chromium plated or aluminised hinging device, fixed in repair, complete all as specified and directed. |
| 83 | Rotational moulded polythylene 1000 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismanting of water tanks of capacity exc 500 ltrs but not exc 1000 ltrs and removing to store, complete all as specified and directed. |
| 84 | Rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismanting of water tanks of capacity exc 250 ltrs but not exc 500 ltrs and removing to store, complete all as specified and directed., complete all as specified and directed. |
| 85 | Sinks with drainage board made of 1mm thick stainless steel kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, fixed in repair, complete all as specified and directed. |
| 86 | Stainless steel kitchen plate rack of size 750 x 900mm not less than 1mm thick sheet thickness of approved make fixed with mild steel screw, fixed in repair, complete all as specified and directed. |
| 87 | Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges (fixed in repair), complete all as specified and as directed. |
| 88 | S&F in repair 125mm size brass chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe of 15mm dia or union, complete all as specified and as directed. |
| 89 | 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or BWP commercial plywood and fixed to wooden plugs/PVC rawl plug with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 90 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, fixed in repair, complete in all respect as specified and directed. |
| 91 | S&F in repair Sheet glass shelf assembly 12cm wide consisting of 5.5mm thick glass with CP bracket guard and railing 60cm long including chromium plated brass screws and wooden or plastic cleats (fixed in repair), complete all as specified and directed. |
| 92 | Corner glass shelf assembly consisting of 5.5mm thick sheet glass size not less then 300x300x70mm with chromium plated brackets double guard and railing including chromium plated brass screws and wooden or plastic cleats (fixed in repair), complete all as specified and directed. |
| 93 | Stainless Steel, 304 grade, heavy duty, toilet paper holder with with lid and flash recessed type fixed with stainless steel screws, fixed in repairs, complete all as specified and directed. |
| 94 | Cleaning of water tank of capacity 1000 litres at existing position (at roof slab/ staging of single/double/triple story bldg), emptying stored water through wash outlet, cleaning and removing all sludge, scale and dirt, etc. from tanks and from the mouths of circulating pipes, washing the internal surfaces with bleaching powder including writing the date of cleaning on tank with white/black synthetic enamel paint in prescribed manner, complete all as specified and directed. |
| 95 | Cleaning of water tank of capacity 250 litres to 500 litres at existing position (at roof slab/ staging of single/double/triple story bldg), emptying stored water through wash outlet, cleaning and removing all sludge, scale and dirt, etc. from tanks and from the mouths of circulating pipes, washing the internal surfaces with bleaching powder including writing the date of cleaning on tank with white/black synthetic enamel paint in prescribed manner, complete all as specified and directed. |
| 96 | PVC Lid for water tank of Capacity 500 Ltr to 1000 Ltr, fixed in repairs, complete all as specified and directed. |
| 97 | 100mm dia stainless steel grating, complete all as specified and directed. |
| 98 | PVC cabinet, 510x490x100mm with looking mirror, full openable door, fixed in repair, complete all as specified & directed. |
| 99 | 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 100 | 75mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 101 | 110mm bore dia PVC (SWR) bends, complete all as specified and directed. |
| 102 | 75mm bore dia PVC (SWR) bends, complete all as specified and directed. |
| 103 | 110mm dia PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), fixed in repairs, complete all as specified and directed. |
| 104 | 75mm dia PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), fixed in repairs, complete all as specified and directed. |
| 105 | Preparation of old painted steel or iron surfaces of any description n.exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and as directed. |
| 106 | Preparation of new steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 107 | Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash,complete all as specified and directed. |
| 108 | Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash,complete all as specified and directed. |
| 109 | Complete removal of existing treatment from wall surfaces plastered or unplastered and applying two coats of white wash, complete all as specified and directed. |
| 110 | Complete removal of existing treatment from ceiling surfaces and applying two coats of white wash, complete all as specified and directed. |
| 111 | Preparation of new plastered or unplastered surfaces of walls and applying 2mm thick wall care putty and making the surface smooth & applying two coats of oil bond distemper paint over a coat of priming paint, complete all as specified and directed. |
| 112 | Complete removal of existing treatment from wall surfaces of any type/description viz. distemper, emulsion etc using mechanical means/grinder, cleaning surface to receive finish, stopping the holes/dipressions with one coat of wall care putty to obtain smooth, even surface and applying two coats of oil bound distemper, complete all as specified and as directed. |
| 113 | Preparation of new plastered or unplastered external surfaces of wall and chajjas and applying one coat of wall care putty and two coats of cement base paint over a coat of alkali-resistant priming paint, complete all as specified and directed. |
| 114 | Complete removal of old existing treatment of external surfaces of wall, chajjas and fascia and one coat of wall care putty and applying two coats of cement base paint , complete all as specified and directed. |
| 115 | Preparation of old painted wood or wood based surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 116 | Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 117 | M&L Framed work such as grills, gratings, cooler/ AC stand, kitchen cupbaord frame manhole's cover, ladder and door etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates including pintle hinges, stops, hand-made sliding bolts etc conforming to Fe.290.Gde-E-165 including one coats of primer and two coat of enamel paint complete all as specified and directed . Please Enable Macros to View BoQ information |
