|
| 1 | Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER,CHENNAI Name of Work: SPECIAL REPAIRS TO BUILDING NO XXVII AT PO COLONY UNDER GE STM CHENNAI Contract No: CWE/STM/ OF 2026-27 Name of the Bidder/ Bidding Firm / Company : SCHEDULE 'A'(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of items Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT With Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | B/R PORTION: |
| 3 | Demolition of cement concrete (unreinforced) of any description in ground floors and pavings not exceeding 15cm thickness below or above ground level including removing debries from site complete all as specified. |
| 4 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, including removing debris from site complete all as specified. |
| 5 | Demolition of reinforced cement concrete reinforced of any description and in any position not otherwise specifically provided for, including separating reinforcement and removing debries from site complete all as specified. |
| 6 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 7 | Demolition of brickwork or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified. |
| 8 | Taking down chowkats or frames with shutters (without taking off shutters from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each, including making good disturbed surfaces complete all as specified |
| 9 | Taking down chowkats or frames with shutters (without taking off shutters from frames) not exceeding 1.5 Sqm each, including making good disturbed surfaces complete all as specified |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified. |
| 11 | M&L for glazed coloured ceramic joint free tiles of size 350mmx250mmx7mm thick / 450mmx350mmx7mm thick on vertical surfaces such as skirting, dados and risers to step etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile , over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified. |
| 12 | M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate ,25mm thick as in levelling course and finishing the surface even and smooth without using extra cement complete all as specified. |
| 13 | M&L for non -skid coloured ceramic joint free tiles 7 mm to 8 mm (Square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile , over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified. |
| 14 | M&L for non -skid coloured ceramic joint free tiles 7 mm to 8 mm (Square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile , over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified. |
| 15 | M&L for non -skid coloured ceramic joint free tiles 7 mm to 8 mm (Square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm on vertical surfaces such as skirting, dados and risers to step etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile , over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified. |
| 16 | M&L for Vitrified light shade ceramic tiles 10mm thick (square / Rectangle) polished, area of each tiles n.exc.0.36sqm in floor etc, set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile , over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified. |
| 17 | M&L for Vitrified light shade ceramic tiles 10mm thick (square / Rectangle) polished, area of each tiles n.exc.0.36sqm on vertical surfaces such as skirting, dados and risers to step etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile , over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified. |
| 18 | M&L for machine cut kota stone slab flooring 20mm to 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified |
| 19 | M&L for machine cut Kota stone slab 20mm to 25mm thick as in riser of steps, skirting, dado and pillar etc laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete laid over and including 10mm thick backing coat in cement mortar 1:3 complete all as specified |
| 20 | M&L for endering 10mm thick on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement in cement mortar 1:4 mixed with liquid water proofing liquid as per manufacturers instructions on sunken slab toilets complete all as specified.Note: Liquid water proofing compound to be measured and paid separately. |
| 21 | M& L for water proofing treatment with APP modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 3.00 Kg/Sqm reinforced with non woven polyester matt black finished over and including compatiable primer at 0.3 litre/Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per Manufactures instructions and as directed . The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in tranverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Make : IWL India Ltd /SAPL (ARGO-P) Hydrotech Ltd (Hydroflame)/STP. Note : Water proofing treatment work shall be executed though authorised applicators of original Manufactures and necessary certificate shall be produced . |
| 22 | M&L for plain cement concrete 1:5:10 type E2, using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified. |
| 23 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like bedded and jointed with grey cement slurry and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishing of approved quality of any size set and jointed in grey cement slurry laid over and including 15 mm thick screed bed in CM (1:4) including polishing the granite stone by using mechanical grinder and moulding edges compete all as specified and as directed. |
| 24 | M & L for Rounding to edges of Granite / stone slabs one edge such as in steps, cooking platforms and other similar situations, compete all as specified and as directed. |
| 25 | M&L for old size brick work with fly ash bricks straight or curved on plan and 6 metre mean radius built in cement mortar 1:6 complete all as specified |
| 26 | S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and or riveted or forged into spikes framed guard bars and similar work conforming to Fe 290 Grade E165 complete all as specified |
| 27 | S&F powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators and grills/guard bars etc with one or more rebates including joining cleat for fixing complete all as specified and directed |
| 28 | S&F Anodised aluminium window and ventilator shutters, side hung without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. anodised alum fittings such as peg stays, handles complete all as specified |
| 29 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire nd average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified. |
| 30 | S&F 4.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each pane complete all as specified and as directed. |
| 31 | S&F Figured glass 4mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified |
| 32 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification ,drawing complete as specified in SSR . |
| 33 | S&F factory made solid PVC moulded door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as directed by Engineer-in-charge. |
| 34 | S&F pressed steel frames of size 125mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified |
| 35 | S&F pressed steel frames of size 1205mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified |
| 36 | M&L for filling back of frame with plain cement concrete 1:3:6 using 20mm stone aggregate complete all as specified |
| 37 | S&F 35mm thick factory made second class hardwood rail and plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces the size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified |
| 38 | S&F 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, etc.; sizes of members of shutters all as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 39 | S&F 40mm thick polished cuddapah stone slab fixed as in cub board shelving complete all as specified and directed. |
| 40 | S&F 19mm thick prelaminated particle board cupboard shutters exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work both sides including 6mm thick teak wood edging alround the shutters complete all as specified and directed. |
| 41 | M&L for providing kitchen cup boards (top and bottom unit) with 19mm thick boiled water proof plywood and 1mm thick approved colour lamination including hinges handles, magnetic catches etc as required for complete all as spcecified and directed by Engineer-in-charge. Note : (a) The top unit shall be approximately 20 Sqft and bottom unit shall be approximately 25 sqft and storage cub board unit shall be 18 sqft (b) The quoted rate shall be inclusive of all fittings and fixtures as required for smooth functioning of cuboard unit. |
| 42 | S&F Modern kitchen accessories made of PVC coated stainless steel comprising of the following complete all as specified and directed. (a)Bottle pull out drawer of size 60cm x 60cm x60cm - 2nos, (b) Plate (Thali) basket drawer of size 60cm x 60cm x 60cm - 1no, (c ) Cutlery stand 60cm x 60cm x 30cm - 1no, (d) Multipurpose 4\\" drawer 60cm x 60cm - 2nos, (e) Multipurpose 6\\" drawer 60cm x 60cm - 2nos |
| 43 | S & F decorative electric stainless steel chimney, air suction capacity of 700 to 850 cum/hour, fitted with LED light / halogen lamp and baffle filter including necessary outline piping of suitable dia and length not less than 3.00m complete all as specified and directed.Note: Quoted rate shall be inclusive for necessary fittings and fixtures as required for fixing chimney Make: Faber Heat Kraft tender 720 LTW 60/ Hindware Zelia GL 60 / KAFF finn 60 / IFBGL 6P 60 CM |
| 44 | M&L for second class hardwood plain fillets ,square / rectangular in section wrought fixed with screws of sectional area exceeding 6 sqcm but not exceeding 13 sqcm complete all as specified and directed. |
| 45 | S&F continuous piano hinges stainless steel ,30mm width of flaps ,fixed to cub board shutters complete all as specified. |
| 46 | S&F mild steel butt hinges, medium weight, cold rolled of 100 mm size fixed with stainless steel screw with frame |
| 47 | S&F mild steel butt hinges, medium weight, cold rolled of 75 mm size fixed with stainless steel screw with frame . |
| 48 | S&F Alluminium anodized, barrel tower bolts of 200mm long extruded section and fixed |
| 49 | S&F Alluminium anodized, barrel tower bolts of 125mm long extruded section and fixed fied. |
| 50 | S&F extruded aluminum alloy handles,150mm fabricated type anodized |
| 51 | S&F extruded aluminum alloy handles,125mm fabricated type anodized |
| 52 | S&F 300mm long aluminium alloy, anodised sliding door bolt with haps, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified |
| 53 | S&F stainless steel decorative coated handles,100mm size suitable for Cabinet / wardrobe shutters complete all as specified |
| 54 | S&F stainless steel decorative coated hasp and staple type, 100mm size suitable for Cabinet / wardrobe shutters complete all as specified |
| 55 | M&L for reinforced cement concrete 1:2:4 (nominal mix ) type B1 using 20mm graded stone aggregate as in slabs supported on walls, beams etc., and other similar items, including necessary form work etc complete all as specified.Note: Reinforcement shall be measured and paid separately under relevant item. |
| 56 | M&L for use and waste of formwork to soffits of suspended slabs and connected beams and similar work, slab thickness not exceeding 200mm (Horizontal or sloping), for flat rough finished surfaces of concrete complete all as specified |
| 57 | M&L for reinforced cement concrete 1:2:4 (nominal mix) type B1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span , lintel bands, roof bands and other similar items, including necessary form work etc complete all as specified.Note: Reinforcement shall be measured and paid separately under relevant item. |
| 58 | M&L for mild steel TMT bars 10mm dia and over , of grade Fe 500, cut to length, bent to shape required, including cranking, bending spirally for hooping, hooking ends and binding with, including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified. |
| 59 | M&L for mild steel TMT bars 6mm to 8mm dia and over , of grade Fe 500, cut to length, bent to shape required, including cranking, bending spirally for hooping, hooking ends and binding with, including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified. |
| 60 | M&L for Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified |
| 61 | S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe ,overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 62 | M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring etc., in brick walls and making good, cutting exceeding 10 cm but not exceeding 20 cm girth complete all as specified and directed. |
| 63 | S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white, including trap and connection to drain and flushing pipe (excluding flushing cistern) including seat cover with recessed bottom and mild steel chromium plated or aluminium hinging devices for pedstal pan and flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified. Make: Hindware / Parryware |
| 64 | S&F in repair vitreous China squatting pan, Orissa pattern, of size 580mm x 440 mm white, with integral foot rests including provision of lime concrete bedding (excluding flushing cisteren and flush pipe) and including provision of flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and directed. |
| 65 | S&F in repairs Chromium plated health faucet (ABS body) mild steel suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS hook including making connections and fixed in postion complete all as specified and directed. |
| 66 | S&F in repairs 10 litres capacity PVC valveless syphonic action type, low level flushing cistern with inlet ball valve, float, handle and flush pipe including brackets including 32 mm dia flush pipe all accessories complete all as specified and directed. |
| 67 | S&F in repairs Vitreous China wash basin, white, flat back, of size 550mmx400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting or fixing of supply and waste pipe complete all as specified and directed. |
| 68 | S&F brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe of 32mm dia or connections including necessary packing, union and cap and fixed complete all as specified and directed. |
| 69 | S&F PVC connection 15mm size with PTMT nuts of length 450 mm |
| 70 | S&F Low density 32mm dia bore polythene waste pipe (LDPE) of pressure rating 6 Kgf / Cm2 complete all as specified and directed. |
| 71 | S&F Pillar taps 15mm bore cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressureconfirm to IS 1795 having mark 'Cold' or 'Hot' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 72 | S&F in repairs Bib taps 15mm bore cast copper alloy with crutch or butterfly handle chromium plated screwed down for iron pipe or for brass ferrule fixed, complete all as specified and directed. |
| 73 | S&F in repairs bevelled edge mirror of size 450mm x 600 mm ,selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers fixing complete all as specified and directed. |
| 74 | S&F in repair stop valves15 mm bore chromium plated with long shank and cup (Concealed type) high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 75 | S&F brass chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified. |
| 76 | S&F in repairs 3 in 1 wall mixer brass CP mixer suitable for 15mm dia pipe for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified. |
| 77 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long below WHB mirror complete all as specified and directed. |
| 78 | S&F in repair toilet paper holder with flat recessed type stainless steel complete all as specified and directed |
| 79 | S&F in repair brass / CP hooks (single) 50mm to 60mm (set of five) complete all as specified and directed |
| 80 | Demolition and breaking up drain pipes of internal dia of 100 mm /75 mm dia of any type such as Salt glazed ware / AC / PVC / reinforced concrete etc., set in cement mortar complete all as specified and directed. |
| 81 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in trenches, floor etc complete all as specified. |
| 82 | S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed to walls, with suitable clamp complete all as specified. |
| 83 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in trenches,floor etc complete all as specified. |
| 84 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, fixed to walls, with suitable clamp complete all as specified. |
| 85 | S&F PVC (SWR) bends any radius suitable for 110mm bore PVC pipes complete all as specified. |
| 86 | S&F PVC (SWR) for 75mm dia of outlet floor trap, plain with grating including jointing with solvent cement etc complete all as specified |
| 87 | S&F PVC (SWR) gully trap of size 125mm/110mm , setting and jointing with solvent cement complete all as specified |
| 88 | S&F PVC (SWR) vent cowl suitable for 110mm bore PVC pipes complete all as specified |
| 89 | S&F PVC (SWR) junction single, (single T) equal or unequal provided with access door suitable for 110mm bore PVC pipes complete all as specified |
| 90 | S&F PVC (SWR) junction single, (single T) equal or unequal provided with access door suitable for 75mm bore PVC pipes complete all as specified |
| 91 | S&F PVC (SWR) bends any radius suitable for 75mm bore PVC pipes complete all as specified. |
| 92 | S&F Grating doom 100mm dia of PTMT Minimum weight 25gms complete all as specified. |
| 93 | S&F Stack clamps suitable for 110mm bore pipe made out of 50 mm x 5 mm thick mild steel flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified. |
| 94 | S&F in repair rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical, vertical with closed top) three layered, hoisted and fixed in position complete all as specified in SSR Part I including 20mm Nipple (minimum weight 45gms ) suitable for HDPE water tank, complete all as specified and \ directed. |
| 95 | S&F in repair rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical, vertical with closed top) three layered, hoisted and fixed in position complete all as specified in SSR Part I including 20mm Nipple (minimum weight 45gms ) suitable for HDPE water tank, complete all as specified and \ directed. |
| 96 | S&F in repair ball valves high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic ball screwed for iron pipe of 25mm dia & fixed (Minimum weight 455gms) complete all as specified |
| 97 | S&F in repair gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of 25 mm dia and fixed complete all as directed. |
| 98 | S&F in repair gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of 50 mm dia and fixed complete all as directed. |
| 99 | Taking up or taking down steel / iron tube of 20 mm bore and connections including cleaning for refixing or removal to store complete all as specified. |
| 100 | S&F CPVC pipes SDR 11 and plain CPVC SDR 11 of outer dia 20mm fittings on walls/ceiling or laying in floors complete all as specified. |
| 101 | Taking up or taking down steel / iron tube of 25 mm bore and connections including cleaning for refixing or removal to store complete all as specified. |
| 102 | S&F CPVC pipes SDR 1and plain CPVC SDR 11 of outer dia 25mm fittings on walls/ceiling or laying in floors complete all as specified. |
| 103 | Taking up or taking down steel / iron tube of 50mm bore and connections including cleaning for refixing or removal to store complete all as specified. |
| 104 | S&F CPVC pipes SDR 11 and plain CPVC SDR 11 of outer dia 50mm fittings on walls/ceiling or laying in floors complete all as specified. |
| 105 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified |
| 106 | M&L for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement on internal wall surfaces complete all as specified and directed. |
| 107 | M&L for Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement on ceiling surfaces complete all as specified and directed. |
| 108 | M&L for rendering 15mm thick, first layer 10mm thick in CM 1: 6 and finishing layer 5mm thick in CM 1:4 mixed with water proofing compound to external wall surfaces and finished the surface even and smooth complete all as specified.Note: WPC shall be measured and paid separately under respective item. |
| 109 | Supply only integral liquid water proofing compound. |
| 110 | M&L for complete removal of existing treatment on walls and applying two coats of oil bound distemper over a coat of primer over 3mm thick coat of wall care putty to internal wall surfaces complete all as specified and as directed. |
| 111 | M&L for preparing new plastered wall surface and applying two coats of oil bound distemper over a coat of primer over 3mm thick wall care putty complete all as specified and as directed. |
| 112 | M&L for preparation of old decorated ceiling surfaces, including providing necessary scaffolding, and applying one coat of white wash, including filling the cracks/depressions using chalk whitening wherever required complete all as specified. |
| 113 | M&L for preparing new plastered ceiling surfaces and applying three coats of white wash complete all as specified and directed. |
| 114 | M&L for complete removal of existing treatment from walls and applying two coats of exterior weather-proof paint over a coat of weather-proof primer to all external wall surfaces, complete all as specified and directed. |
| 115 | M&L for preparation of new steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 116 | M&L for preparation of new wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 117 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 118 | M&L for preparation of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 119 | M&L for plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick as in plinth protection and paving, finished even and smooth without using extra cement including providing expansion joints complete all as specified. |
| 120 | M&L for strengthening the reinforcement exposed RCC soffit surfaces with providing and applying Renderoc SP40 mixed with water in ratio as per Manufactuere instruction , a high strength shrinkage controlled cementitious repair mortar average thickness of 50mm incuding provision of Galvonic anode with additional reinforcement and shear connectors drilling 12mm dia holes upto a depth of 75mm maximum and fixing 8mm dia L shaped anchor rods at every 300mm c/c, fill the drilled holes with Lokfix E77 over anti corrosive coating with Nitozinc primer of Fosroc including necessary chipping the spalled old concrete in soffit of the slab and provision of scaffolding all as specified and as directed.NOTE: Work shall be executed through authorised applicator of Manufactuer. |
| 121 | M&L for removing the existing roof treatment of any description completely and remove all the debris from site and rubbish off the premises complete all as specified and as directed. |
| 122 | M&L for screed bed 20 mm thick in cement mortar 1:4 mixed with water proofing compound and finish the surface even and fair to receive APP membrane complete all as specified and directed.Note: WPC shall be measured and paid separately under respective item. |
| 123 | M&L for APP Modified prefabricated five layer water proofing membrane, not less than 3 mm thick and weighing not less than 3.80 kg/Sqm reinforced with non woven polyester matt black finished over compatible primer @ 0.3 Litres per Sqm, and a bonding bitumen of VG-10 at 1.20 kg/Sqm torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per Manufactures instructions and finally finished with a coat of bit mastic aluminium paint @ 0.10 litre/Sqm over a coat of blown bitumen 85/25 grade @ 1.20Kg/Sqm over the membrane. The Over lap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage including preparatory work and removing existing membrane treatment completely.Manufactures: IWL India Ltd/SAPL (ARGO-P) Hydrotech Ltd (Hydroflame)/STP. Note: The work shall be carried out by the Authorised applicators of Manufactures |
| 124 | M&L for hydrulically pressed burnt plain clay tile of size 200mm x 200mm x 19/20 mm machine made laid over and including cement mortar screed bed 15mm thick in CM 1:6 mixed with and including water proofing compound and jointed, pointed in CM 1:3 mixed with and including 5% crude oil by weight of cement all as specified and as directed. |
| 125 | M&L for Post constructional Anti - termite treatment along the external wall below concrete or masonry apron / plinth protection using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc., in apron using Chloropyriphos20 EC all as specified and as directed. |
| 126 | M&L for Post constructional Anti - termite treatment to soil under existing floors / sub base using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holeswith CM 1:2 to match the existing floors / subbase using Chloropyriphos20 EC all as specified and as directed. |
| 127 | E/M PORTION: |
| 128 | Taking down carefully existing point wiring of any description (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit all as directed. |
| 129 | M&L for Point wiring complete with 1.5 sqmm FRLSH single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor drawn through and including non-matallic rigid PVC conduit PVC conduit fittings and conduit asccessorries concealed in walls, roofs and floors etc., including Modular flush boxes and Modular cover plates for switches concealed in walls, roof and socket / electronics fan regulator / telphone socket, including provision of 1.5 sqmm PVC insulated unsheathed cable with multi stranded copper conductor as earth continmuity conductor and connecting to common earth dolly all as specified for one light/fan point controlled by one way switch complete including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 Cm girth all as specified and as directed. |
| 130 | (a) One light point controlled by one switch. |
| 131 | (b) One Ceiling fan point controlled by one switch and one regulator. |
| 132 | (c) One 3 pin 5 amps switch socket on independent board. |
| 133 | (d) One 3 pin 5 amps switch socket on same board along with other switches. |
| 134 | (e) One exhaust point controlled by one switch |
| 135 | (f) One bell point controlled by bell push switch on independent board. |
| 136 | (g) One light point controlled by two 2 - way switches |
| 137 | All as per item No.126 above but with 4 sqmm copper conductor cable with 4 sqmm PVC copper conductor cable as earth continuity conductor for one socket outlet 15/16 amps controlled by one switch 15/16 Amps on independent board all as specified and as directed. |
| 138 | M&L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 4 runs of 10 sqmm including one run of 10 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping incl accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unserviceable all as specified and directed. |
| 139 | M&L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping incl accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unserviceable all as specified and directed. |
| 140 | S&F LED lights fitting 1x 20 W / 22W, 220V,AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified. |
| 141 | S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified. |
| 142 | S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure diecast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. |
| 143 | S&F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and as directed. |
| 144 | Supply and replacement of metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 240 Volts 20 Amps all as specified and as directed. |
| 145 | S&F MCCB Distribution board, TP&N , vertical , double door, sheet steel, enclosure powder coated with 160 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete including 3 Pole V-Tec MCCB of 100 A rating & 16kA breaking capacity, MCCB pre-fitted at factory including taking down Old DBs all as specified and directed. |
| 146 | S&F MCCB four pole , 415 Volt, 100 Amps,16 KA , adjustable thermal & fixed magnetic setting including taking down Old MCCB complete all as specified and directed. |
| 147 | S&F MCB SP 230 volts,40 amps 'C' Curve 10 kA Capacity including taking down Old MCB complete all as directed. |
| 148 | S&F Ceiling rose surface bakelite 65mm x 50 mm two to three terminals |
| 149 | S&F Modular switch 2 way 6A, 1 module, 240 Volts |
| 150 | S&F Modular switch 1 way 6A, 1 module, 240 Volts |
| 151 | S&F Modular switch 1 way 16A, 1 module, 240 Volts |
| 152 | S&F Modular Socket, 6A - 2/3 pin combined 2 module |
| 153 | S&F Modular socket 6 A/ 16 A - 2/3 pin combined 2 module |
| 154 | S&F Modular Bell push, flush type, 5 Amps |
| 155 | S&F bell ding Dong 230V AC single pole |
| 156 | S&F Modular Fan step regulator, 100W - 1 module suitable for ceiling fan of 1200 mm sweep . |
| 157 | Taking down existing ceiling fan, exhaust fan, geyser of any size and capacity and sealing cable end, dismantling blades and removing fan and blades to store complete all as directed by Engineer-in-Charge. |
| 158 | M&L for painting the ceiling fans, exhaust fans and geysers of any size and capacity complete in situ with one coat of synthetic enamel paint by using sprayer including filling cavities with filler, after cleaning all dust etc complete all as specified and as directed. |
| 159 | M&L for hanging and refixing the ceiling fans, exhaust fans and geysers of any size and capacity and connecting up including provision of cable from ceiling rose or connector to fans or exhaust fans and geysers complete all as specified and as directed.Note: Ceiling fan,exhaust fan and geyser as removed under BOQ ser. item No 147 shall be refixed . |
| 160 | M&L for Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No 5 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoad dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
