|
| 1 | Demolishing stone rubble masonry manually/ by mechanical meansincluding stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction ofEngineer-in-chargeIn cement mortar 15.9.2 |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavatedearth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.2.7.1 |
| 3 | Providing and laying in position cement concrete of specified grade1:3;6(1 Cement : 4 coarse sand (zone-III) : 8 graded stonelevel 4.1.6 |
| 4 | Random rubble masonry (second sort) with hard stone in foundation &plinth withCement mortar 1:6 (1 cement : 6 coarse sand) 7.1.1 |
| 5 | Centering and shuttering including strutting, propping etc. and removalof form for :Suspended floors, roofs, landings, balconies and access 5.9.3 |
| 6 | Providing and laying in position specified grade of reinforced cementconcrete, excluding the cost of centering, shuttering, finishing andreinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stoneaggregate 20 mm nominal size)5.1.2 |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in :6.4.1 |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level5.22.6 |
| 9 | Steel work welded in built up sections/ framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as requiredIn gratings, frames, guard bar, ladder, railings, brackets, gates10.25.2. |
| 10 | Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08%and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoints with white cement and matching pigments etc., complete11.41.2 |
| 11 | Providing wood work in frames of doors, windows, clerestory windowsand other frames, wrought framed and fixed in position with hold fastlugs or with dash fasteners of required dia & length ( hold fast lugs ordash fastener shall be paid for separatelySal wood 9.1.2 |
| 12 | Providing and fixing precoated galvanised iron profile sheets12.5 |
| 13 | Providing ridges or hips of width 60 cm overall width plain G.S. sheetfixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.Ilimpet and bitumen washers complete.12.4.1 |
| 14 | 12 mm cement plaster of mix1:6 (1 cement: 6 fine sand)13.1.2 |
| 15 | Finishing walls with textured exterior paint of required shadeNew work (Two or more coats applied @ 3.28 ltr/10 sqm)over and including priming coat of exterior primer applied@ 2.20kg/10 sqmQty as item no 19 13.45.1 |
| 16 | Painting Steel work with Deluxe Multi Surface Paint togive an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufactur13.48.3 |
| 17 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brasspillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the wallswherever require17.7.1 |
| 18 | Providing and fixing white vitreous china pedestal type water closet(indian type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfixtures complete, including cutting and making good the walls andfloors wherever required :17.1.1 |
| 19 | Providing and fixing C.P. brass bib cock of approved quality conformingto IS:8931 18.49.1Providing and laying 60mm thick faciory made cement concreteinterlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mmthick compacted bed of coarse sand, filling the joints with line sandetc. all complete as per the direction of Engineer-in-charge 16.91.1 |
| 20 | Providing and laying 60mm thick faciory made cement concreteinterlocking paver block of M -30 grade made by block makingmachine with strong vibratory compaction, of approved size, design& shape, laid in required colour and pattern over and including 50mmthick compacted bed of coarse sand, filling the joints with line sandetc. all complete as per the direction of Engineer-in-charge 16.91.1 |
| 21 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 20 mm nominal outer dia PipesInternal work - Exposed on wall 18.7.2 |
| 22 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 100MM 12.41.1 |
| 23 | 75 MM 12.41.2 |
| 24 | Providing and fixing ISi marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISi marked Stainless Steel butt hinges with necessary screws 9.21.1 |
| 25 | P/F SITTING BENCH Rate AERDO Market Please Enable Macros to View BoQ information |
