|
| 1 | Earth work in excavation of foundation trenches in hard soil including dressing and leveling the bed upto the required depth and depositing the excavated materials with all leads and lifts T&P shoring & Shuttering if required etc. complete as directed by the Engineer-in-charge. |
| 2 | Earthwork in stoney earth and gravel mixed with stone boulders not exceeding .014cum in volume with initial lead and lift including rough dressing and breaking clods upto 5cm to 7cm size and laying in layers each layer not exceeding 0.3m in depth etc. complete. |
| 3 | Excavation of foundation in laterite rock or any hard rock ( other than granite or distinguished rock ) removed by chiesselling including dressing and levelling the bed not exceeding 1.50 mtr in depth and depositing the soil within initial lift 50 mtr. as per specification and direction of the Engineering in chsarge. |
| 4 | Supplying filling in foundation and plinth with sand including watering ramming, cost, conveyance, royalties and all taxes of materials and cost of labour with T&P required for the work etc. complete (measurement will be taken on finished section only etc.complete as directed by the Engineer-in-charge. |
| 5 | Cement concrete (1:3:6 ) in foundation and plinth below the base course of terrazzo flooring using 4cm (1 1/2\\") size black hard hand broken granite stone metals of approved quality from approved quarry including lowering laying concrete watering and curing etc. complete to required levels laid in layers not exceeding 0'-6\\" thick inlcuding cost, conveyance, royalties and all taxes of all materials and cost of all labour with T & P required for the work complete. |
| 6 | Brick masonary in cement mortar (1:6) using K.B.Bricks / Cement flyash of size 10\\" x 5\\" x 3\\" having crushing strength not lessthan 75 Kg/Cm2 after immersing the bricks for six hours in water before use in Foundation and plinth in all florrs with all necessary projection, cutting mlulding, corbelling, champering, watering and curing including cost conveyance, royalties and taxes of all materials and labour T&P required for the work etc.complete as per the direction of Engineer in Charge. Ground Floor |
| 7 | R.C.C.work of M-25 having a minimum comprresive strength (in work test) 250 kg/Cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS 516 using 12mm size black hard crusher broken granite chips including hoisting,lowering laying and compacting concrete by using vibrator with watering and curing for 28 days centering and shuttering and finishing the exposed surface smooth providing grooves or beds whereever necessay including cost conveyance,royalties and all taxes of all materials and cost of all labour with T&P required for the work etc.complete in all respect but excluding cost of M.S.Rods or Tor Steel and binding wires and labour charge for bending binding and tying the grills etc.complete in all respect as per direction of Engineer-in-charge. Column Base |
| 8 | Plinth Bend/Grade Beam Ground Floor |
| 9 | Bed Block Ground Floor |
| 10 | Lintel Band Ground Floor |
| 11 | Column in Super structure Ground Floor |
| 12 | Wall Beam & T-Beams Ground Floor |
| 13 | Stair case Ground Floor |
| 14 | Chajja & fins Ground Floor |
| 15 | Roof Slab Ground Floor |
| 16 | Providing HYSD bar reinforcement for R.C.C. work including Straightening, cutting, bending, binding, welding, tying the grills, laying and placing in proper position as per approved design and drawing including cost, conveyance of 18 to 20 gauge binding wire cost and conveyance of HYSD bars complete in all respect as per specification for road & Bridge and direction of Eng - in Charge. Ground Floor |
| 17 | Brick masonary in cement mortar (1:6) using K.B.Bricks/Cement flyash of size 10\\" x 5\\" x 3\\" having crushing strength not lessthan 75 Kg/Cm2 after immersing the bricks for six hours in water before use in superstructure in all florrs with all necessary projection, cutting mlulding, corbelling, champering, watering and curing including cost conveyance, royalties and taxes of all materials and labour T&P required for the work etc.complete as per the direction of Engineer in Charge. Ground Floor |
| 18 | 12mm(1/2\\")thick cement plaster (1:4) in all floors over brick work finished smooth including cement punning and Bitumen painting including watering, curing, cost conveyhanace, royalty and all taxes of all materials and labour with T&P required for the work etc.complete as per direction of Engineer-in-charge. Ground Floor |
| 19 | 20mm thick cement plaster (1:6)in surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work in Foundation and plinth etc complete. as per the direction of Engineer in Charge. Ground Floor |
| 20 | 12mm(1/2\\") thick cement plaster (1:6) in finished smooth to outside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge. Ground Floor |
| 21 | 16mm(5/8\\") thick cement plaster (1:6)in finished smooth to inside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge. Ground Floor |
| 22 | Supplying,fitting and fixing of M.S. doors, windows and iron grill gate made out of (45x45x60)mm size angular frame with square bar M.S. flat for grills of approved design icluding all cost conveyance taxes etc. complete. ( Prevaling lowest local market rate and excluding labour for fixing ) Ground Floor |
| 23 | Fixing of vetrified tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. complete in all respect as per the direction of Engineer in Charge. Ground Floor |
| 24 | Fixing ceramices tiles in dados,skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 25 | Fixing chequred tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 26 | Supplying fitting, fixing up window ( Sliding type ) made up aluminum section 9778 as window frame, section No - 4095, 4096 and 9777, 3994 as shutter frame with 5 mm thick black glass as pannel fitted with rubber beading including locking arrangements including all fittings including cost of materials, all taxes, labour ,T & P excluding cost of glass etc. complete as per the direction of the Engineering - in - charge. |
| 27 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing in all floors using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2 mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. |
| 28 | Finishing wall surface with two coats of approved quality of weather seal coat of approved shade over a coat of primer including cost of all materials etc.complete. |
| 29 | Finishing wall surface with Acrylic wall putty (water based) of approved make and finish smooth and even surface to receive painting including cost of all materials labour T&P etc complete. |
| 30 | Cement washing one coat including watering ,curing with cost,conveyance, royalities of cement etc.Complete as per direction of Engineer-in-Charge |
| 31 | Distempering two coats with any approved shade including cost of distemper etc complete. |
| 32 | Painting two coats with approved paint over a coat of primer Including cost of all materials etc. complete. |
| 33 | FIRST FLOOR(HEAD ROOM) RCC wok of M-25 grade with 20mm downgraded size hard granite chips including hoisting and laying Column in Super structure |
| 34 | Roof Beam |
| 35 | Chajja & fins |
| 36 | Roof Slab |
| 37 | Supplying fitting and placing uncoated HYSD bar reinforcement complete asper drawing and technical specification. |
| 38 | Brickwork with Cement Cement Flyash bricks/KB Bricks in cement mortar (1:6) in Super structure |
| 39 | 12mm thick cement plaster (1:6) over brick work including cement punning and n top of wall etc. complete. |
| 40 | 16mm(5/8\\") thick cement plaster (1:6)in finished smooth to inside smooth surface of brick walls afrer racking out joints including watering and curing etc.complete with cost,conveyance royalties,all taxes and cost of all materials and cost of all labour with T&P requred for the work complete. as per the direction of Engineer in Charge. |
| 41 | Supplying,fitting and fixing of M.S. doors, windows and iron grill gate made out of (45x45x60)mm size angular frame with square bar M.S. flat for grills of approved design icluding all cost conveyance taxes etc. complete. ( Prevaling lowest local market rate and excluding labour for fixing ) |
| 42 | Finishing wall surface with two coats of approved quality of weather seal coat of approved shade over a coat of primer including cost of all materials etc.complete. |
| 43 | Finishing wall surface with acrylic wall putty finished smooth to exposed new plastered surface including cost of all materials etc.complete. |
| 44 | Painting two coats with approved paint over a coat of primer Including cost of all materials etc. complete. |
| 45 | Cement washing one coat including watering ,curing with cost,conveyance, royalities of cement etc.Complete as per direction of Engineer-in-Charge |
| 46 | Distempering two coats with any approved shade including cost of distemper |
| 47 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) -do- Group A |
| 48 | -do- Group B |
| 49 | -do- Group C |
| 50 | Recessed wiring to Fan Point in... -do- Group B |
| 51 | Recessed wiring to Call Bell Point in... -do- Group C |
| 52 | Recessed wiring toExhaust Fan Point in... -do- Group B |
| 53 | S/F of Angle holder replacing Ceilling Rose |
| 54 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board |
| 55 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 56 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 57 | S/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection |
| 58 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover |
| 59 | 4 Modular box with base & cover |
| 60 | 6 Modular box with base & cover |
| 61 | 8 Modular box with base & cover |
| 62 | 12 Modular box with base & cover |
| 63 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.0 (1.8) |
| 64 | 2x2.5+1x1.5 (1.8.2) |
| 65 | 2x4+1x1.5 (1.8.3) |
| 66 | 2x6+1x2.5 (1.8.4) |
| 67 | 4x10+2x4(1.8.11) |
| 68 | Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 69 | S/F of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 70 | S/F of 'B/C/D' series DP MCB of 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the ISI marked complete with connection, testing and commissioning etc. as required |
| 71 | S/F of Power point with 4 modular & 2 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket & Mini DP MCB, connection, painting etc as required for AC. |
| 72 | S/F of MCB 12 way Double Door (2.3.7 ) |
| 73 | Supply & fixing of 100 A TPN Panel board 1. 100A MCCB (Make- Legrand/Seimens/L&T/C&S/) &100A kitkat & bus bar2. 100 A TPN MCB (Legrand/Seimens/L&T/C&S)- 3nos 3. 32A DP MCB- 6 nos 4. 100 A Center off TPN MCB changeover (Legrand/Seimens/L&T/C&S)- 1nos 5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad) |
| 74 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 75 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 76 | Supply, Installation, Testing & Commissioning of exhaust fan upto 300 mm sweep in the exising opening, including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (1.43)(Usha-Aero clean plus-DBB/polycab-Fresh on -DBB/Crompton-trans Air-12\\"reversible/Havells-Ventil Air DS(HS)R/Anchor-anmol Deluxe-R/Orient-Power Flow(DBB |
| 77 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.3) |
| 78 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. |
| 79 | S/F of 18-25 Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPL |
| 80 | Supply of 1200mm A.C. Ceiling fan (1 Star) with all accessories and connections with out fan regulator (Make:Usha Striker Neo HS/Polycab-vital HS/Crompton-High Speed/Havells-Smart ES/Anchor-Turbo speed star/Orient-Summer Breeze Pro/Great White-ALDOUS |
| 81 | S/F step type fan regulator(1.25a) |
| 82 | Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31) |
| 83 | S/F of 15mm dia down rod with all accessories (1.35+1.40). |
| 84 | Supply & fixing of superior type C.I bulk head fitting with 9W Led Bulb for general domestic use ISI marked square / oval type with premetallic glass cover provided with galvanized steel wire guard including necessary connections. ( M-5 ) |
| 85 | Supply & Fixing of 45-48 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 86 | S/F of electronic 12w Watt LED Bulb |
| 87 | S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.(M-22) |
| 88 | S/F of Testing & Commissioning of Luminous tall tubular invertor batary (2Nos ) 150 AH & 2000 VA, 24 V Inverter (make - Luminious/Exide) |
| 89 | S/F of 25 AMP Motor starter / A.C starter switch ( Make - Anchor /Havels) |
| 90 | SITC ISI marked (Is:15683)Fire Extinguisher carbon -di-oxide type capacity 4.5 kg Flat base including valve discharge house of not less than 10 mm dia,1M long and completed in all respect including initial fill with CO2 GAS conforming to IS:307-1966 and wall suspension bracket as required as per specification. |
| 91 | SITC OF 6 KG abc (Power Type)Fire Extinguisher Mild steel Cylinders ISI marked fitted with pressure indicating gauge,Internal Tube,squeee lever type valve fully charged with ABC 90 power(Mono Ammonium Phosphate)pressured by Nitrogen completed with in all respect wall suspension bracket as required as per specification. |
| 92 | MISCELLANEOUS WORK Sand Buket as per IS Specicification |
| 93 | Bukets stand to store 3 nos of Bucket also having aluminium sheet above the atend to prevent the sand from rain/sunset. |
| 94 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor C-PVC pipes conforming to pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.Ground Floor 25mm dia C-PVC pipe (Ashirbad/Supreme) |
| 95 | In 1st Floor-32mm dia C-PVC pipe (Ashirbad/Supreme) |
| 96 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.250mm thick wall in Ground floor |
| 97 | Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. in Ground Floor |
| 98 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In Ground Floor |
| 99 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.15mm dia CP Short Body Bib cock (Jaquar make) |
| 100 | 15mm dia CP short body bib cock (Jaquar make) |
| 101 | 15mm dia CP long body bib cock (Jaquar make) |
| 102 | 15mm dia CP angle stop cock (Jaquar make) |
| 103 | 15mm dia CP Concealed stop cock (Jaquar make) |
| 104 | 15mm dia CP two in one bib cock (Jaquar make) |
| 105 | 15mm dia CP Health faucet (Jaquar make) |
| 106 | 15mm dia CP extension piece |
| 107 | 15mm dia CP Pillar cock (Jaquar make) |
| 108 | 25mm dia G.M or Brass F.W valve (Sakti make) |
| 109 | 125mm dia CP gratings |
| 110 | Wall Mounted Grab Bar 600 mm long |
| 111 | Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge.10 litres PVC L.L. Cistern (Slimline-white) |
| 112 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturers specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge.75mm dia U-PVC SWR pipes(Supreme/Ashirvad) |
| 113 | 75mm U-PVC plain bend |
| 114 | 75mm U-PVC Door bend |
| 115 | 110mm dia U-PVC SWR pipes(Supreme/Ashirvad) |
| 116 | 110mm U-PVC door bend |
| 117 | 110mm U-PVC door Tee |
| 118 | 110mm U-PVC D/J with Door |
| 119 | 110mm dia U-PVC offset without ear |
| 120 | 110mm U-PVC plain bend |
| 121 | 110mm U-PVC vent cowl |
| 122 | 75mm U-PVC vent cowl |
| 123 | 110mm dia U-PVC 'P' trap |
| 124 | 110mm dia U-PVC socket plain |
| 125 | 75mm dia U-PVC socket plain |
| 126 | PVC Clamp |
| 127 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan conforming to IS:2556-part-3-2004) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI P or S trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge(Nycer,parryware make).580mm size Orissa pan(Hindware/Parryware/Neycer) |
| 128 | Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral S or P trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge.EWC with Seat Cover (Parryware/Hindware/Neycer) |
| 129 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered Hot and Cold with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge.550mm x 400mm size W. H. Basin (Parryware/Hindware/Neycer) |
| 130 | Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with C.I/M.S brackets paintedwhite including holes in walls and making good the damages etc all complete as per specification and direction of the E.I.C.600x450x250 mm stainless steel kitchen sink (Mousumi make) |
| 131 | Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge.600mm x 450mm size B.E mirror |
| 132 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.450mm x 125mm plate glass shelf with CP guard rails (Plaza/Amber/Aquatic) |
| 133 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.20mm x 600mm long CP towel rail (Plaza/Amber/Aquatic) |
| 134 | CP towel Ring (Plaza/Amber/Aquatic) |
| 135 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.CP soap holder (Plaza/Amber/Aquatic) |
| 136 | Providing and laying CERAMIC FLOOR TILES of premium grade and of approved size & shade in flooring on a bed of 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand) finished with flush pointing in white cement & pigment to match the shade of the tiles. |
| 137 | Supplying, fitting & fixing of Ceramic wall tiles of premium grade of size 300x200/200x200mm having thickness 6.5mm to 6.7mm confirming to IS 13753 in dadoes, skirting and risers of steps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge |
| 138 | Factory made GIRID FRP or called GRP sandwich composite door shutter of 32mm thick laminated with two GRP skin with good grain finish fabricated using UV stabilised isoppthalic gel coat and one layer of 450 gsm E-glass chopped strand mat (CSM) impregnated with ortopathilic resin The thickness of the skins shall not be less than 1.50mm . Expanded polysryne ( EPS) structural foam panel of 29 mm tickness and a density of 20kg/cu.mts shall be used as core material wooden reinforcements made of sesasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fitting the metal fittings such as lower bolts ,aldrops, handles etc. shall be provided . A structural adhesive compatible with (EPS)foam shall be used for bending the core material. the sal wood reinforcements and the skin The material and process for manufactuing te door shutter shall conform to RV -TIFAC components design centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The Finish of door shutter will be plain colour as per specification and direction of the Engineer in Charge. etc. complete |
| 139 | Factory made FRP( Altematly called GRP) door frame of size 75mm x 100mm fabricated using E - glass chopped strand mat (CSM) U.V stabilised inopathalic Gel coat and impregnated with inopathalic resin The thickness of the GRP skins shall not be less then 2.0 mm . The door frame consists of four segments which are provided with plug in socket arrrangement in-situ-in mould. The segments are plugged in and are joined together by means of srew. The GRP frame shall be provided with wooden reinforcement on six locations for high srew holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam / plaster of paris with fibre reinforcement , six number of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the finish of door frame shall conform to RV-TIFAC composites Design centre's standards and specifications . The finish of door frame will be plain colour white /Ivory/Beige/Light grey / Golden brown / Mahogany/ Teak wood /sand stone Champagne/Pastel blue or any other colour using high quality pigment complete in all respect as per specification and direction of the Engineer in Charge. etc. complete |
| 140 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, Fly ash brickwork in c.m (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size C.I grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Gully Trap chamber (0.25x0.25 inside size) |
| 141 | Supplying all materials, labour, T&P and constructing Inspection Chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6),moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mm x 760mm x 460mm |
| 142 | Supplying all materials, labour, T&P and constructing Manhole Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.CConstruction of Manhole Chamber (910mmx910mmx910mm) |
| 143 | EXTERNAL PH WORKSinking of 200mmx150mm dia Bore Well through DTH method.- 1No. Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only. Drilling of 200mm dia bore 0 to 30.00mtr |
| 144 | Drilling of 150mm dia bore 30.00 to 100.00 mtr and above |
| 145 | Labour for lowering the following size of PVC casing pipes with or without slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted and set up in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplyinging and fixing of all jointing materials ,extra sockets and T&P etc. all complete and keeping the top of casing pipe threaded including plugging the tubewell to prevent entry of foreign materials.Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs |
| 146 | Cost of 200mm dia PVC schedule - 80 pipe |
| 147 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge |
| 148 | Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing,commissioning,trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.1HP Three Phase 5 stage submersible pump set. |
| 149 | DOL control panel |
| 150 | M. S. Clamp, Bend, Socket ,SS nipple etc. |
| 151 | 2.50mm Sqm Submersible flat cable |
| 152 | Steel rope with cover |
| 153 | 50mm dia HDPE pipe |
| 154 | Labour charges for lowering, testing, commissioning & transportation to site etc. |
| 155 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge .1.20m dia x 2.00m deep soakway pit |
| 156 | 1.0m dia x 2.00m deep soakway pit |
| 157 | Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturers specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc pipe alround concrete |
| 158 | 160mm dia u-pvc pipe alround concrete |
| 159 | Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank of capacity 2000 litre conforming to 12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr above G.L and placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 160 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx3.18m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 161 | Construction 1No 30 users Septic tank Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. Initial lift upto 1.50m |
| 162 | - do - with addl. Depth of 1.5 m |
| 163 | Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.in ground Floor- |
| 164 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalry, taxes etc all complete as per P.H specification and direction of the E.I.C.in ground floor |
| 165 | Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.In ground Floor |
| 166 | Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 167 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 168 | Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 169 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 170 | Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 171 | Supplying all materials, labour, T&P and providing reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 172 | Supplying all materials, labour, T&P and making M.S. Step Iron in 20mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C. |
| 173 | Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 174 | Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C. |
| 175 | Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 176 | Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 177 | Supplying all materials, labour T&P and fitting and fixing of C.P Shower with 15mm or 20mm inlet with C.P Shower arm including polishing etc all complete as per specification and direction of the E.I.C Please Enable Macros to View BoQ information |
