|
| 1 | Supplying, fabricating, erecting and fixing Calcium Silicate Board False Ceiling Using perforated Sheets upto a ceiling height of 4.5m from floor level (M-0618) |
| 2 | Supply & fixing of 20W LED Tube Light for T8 Fitting (Double Side) |
| 3 | Supply & fixing of 20W LED Tube Light for T8 Fitting (Single Side) |
| 4 | Supply & fixing of 1200mm AC ceiling fan complete set with steped electronic 300 W regulator with existing clamp (SD 107) |
| 5 | Supply And Delivery of Kitchen Accessories |
| 6 | Supply & fixing of AC Exhaust Fan 300mm (12”) Sweep (Light Duty) |
| 7 | Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections. |
| 8 | Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc (Manually Operated-M-0401) |
| 9 | Dismantling, clearing away and carefully stacking materials of Weathering Course complete complying with standard specifications |
| 10 | Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum |
| 11 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete |
| 12 | Supply And Delivery of Kitchen Accessories |
| 13 | SS.Sambar Bucket |
| 14 | SS. Hot Box |
| 15 | Ind.Sq.Idly Pot |
| 16 | SS.Bucket (15 L) |
| 17 | SS. Anda (20 L) |
| 18 | SS. Anda (30 L) |
| 19 | SS.Plate |
| 20 | SS.Cup |
| 21 | SS.Water Jug |
| 22 | SS.Sambar Karandi |
| 23 | Ind.Dabara (4Kg) |
| 24 | Ind.Dabara (8 Kg) |
| 25 | Ind.Dabara (12 Kg) |
| 26 | Knife |
| 27 | SS.Aruvamanai |
| 28 | SS.Glass |
| 29 | 3 Burner Gas Stove (SS) (Heavy Canteen) |
| 30 | Lighter |
| 31 | Mixer (Preethi Expro) |
| 32 | wed Grinder (1.5 HP) |
| 33 | Kadai (15L/20L) |
| 34 | Freezer (Voltas) |
| 35 | Thorough scrapping of old plastered surface etc., complete complying with standard specifications |
| 36 | Plastering with cement mortar 1:4 (One Part of Cement and Four part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) |
| 37 | White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333 |
| 38 | Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 39 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 40 | Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 41 | Supplying and erecting in position of following literscapacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World HealthOrganisation (WHO) Standards with following accessories.(a) MS Skid - 1 No.(b) Media 11054 No. Vessel with 20 nb Multiport Valve(with Media Pubble and Fine Sand and Activated CarbonFilling) set(c) Feed Pump 0.50 HP – 1 No.(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.(e) Membrane 40 x 40 filmtech (or) equilaents /Osmonic (USA) - 1 No. and Membrane Pressure Vessel40 x 40 -1 No. & Pressure Gauge - 2 Nos.(f) Flow Meter - 1 No. 20 Filter with Housing - 1 No.,Low Pressure Switch - 1 No., Level Switch - 1 No. &Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel ControlSystem with necessary Stainless Valves and Fittings andFloat Control etc. The rate should be inclusive of allcivil works, wherever necessary to install the System inposition and intact. |
| 42 | Geological Investigation charges for selecting the new point inculding cost of all charges etc., complete as per standard specifications. |
| 43 | Drilling of150mm dia borewell in Hard rock areas anywhere in Tamilnadu including transportaion to the work site charges in hard rock areas and developing the borewells. |
| 44 | Supply and delivery of 150mm CS PVC Casing Pipe as per IS 12818 / 20 including cost and conveyance etc., complete as per standard specifications (TWAD SOR 24-25 WD-M0027) |
| 45 | Earthwork excavation for foundation in all types of soils and sub-soils and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete (For Foundation) |
| 46 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M - Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 47 | Brick work using Country Bricks of size 8-3/4\\" x 4-1/4\\" X2-3/4\\"\\" in Cement Mortar 1:5 (One cement and five crushed stone sand) including curing neat finishing, etc., complete complying with standard specification. |
| 48 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 49 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 50 | Supply and delivery of 2 HP (10 Stage) Submersible motor pumpset in single phase as per IS 8034 without panel board for 20 Lpm x 90 m Head including all material charges and labour charges etc., complete as per TWAD specifications (TWAD SOR 24-25 WD-M1595) |
| 51 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days ( TWAD SOR 24-25 WD-W 0871) |
| 52 | Supply and delivery of 4.00 sq.mm PVC insulated and sheathed 3 Core Flat type Copper Cable conforming to IS 694/1990 including all cost of material and labour charges etc., complete as per standard specifications (TWAD SOR 24-25 WD-M1975) |
| 53 | Supply and Delivery of 25mm 'U' PVC pipe with ISI Mark including all cost of all material charges and all labour charges etc., complete as per standard specifications ( TWAD SOR 24-25 WD-M 0048) |
| 54 | Supply and fixing of 2.00 HP single phase Panel Board for ISI make in good quality including cost of all material charges and labour charges etc., complete as per Specifications (WD-M 1907 TWAD SoR 24-25) |
| 55 | Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mm x 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25mm x 3 mm including cuting, welding, grinding, locking arrangements and labour charges etc., complete (WD-M 1471 TWAD SOR 24-25) |
| 56 | Supplying, delivery, laying and jointing of 32 mm PVC dia PVC pipe working pressure 10 Kg per cm2 (WITH ISI MONOGRAM) including cost of all material charges and labour charges etc., complete as per Specifications (PWD SOR 2024-25 M-0877) |
| 57 | Supplying, delivery, laying and jointing of 25 mm dia GI pipe B Class of approved quality and best variety conforming to I.S.S & with I.S.I mark including cost of all material charges and labour charges etc., complete as per Specifications (PWD SOR 2024-25 M-0437) |
| 58 | Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains including cost of all material charges and labour charges etc, complete as per standard specification (PWD Electrical Data 2024-25 SD 65) |
| 59 | Supply and run of 2 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 25mm dia GIpipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (PWD Electrical Data 2024-25 SD 70) |
| 60 | Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuseunit (500V) 32A neutral link and earth link (1\\"x1/8\\" copper flat) on TWplank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TWplank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1No 40Amp 30MA Double Pole RCD / RCCB (Lower End) with suitable necessary connection (PWD Electrical Data 2024-25 SD126) |
| 61 | Earthing as per PWD standard with an earth electrode of 2metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry workSD (PWD Electrical Data 2024-25 SD212) |
| 62 | Supply delivery and fixing of GI & PVC Borewell Specials including cost of all materials etc.,complete |
| 63 | Bore cover plate (L.R) |
| 64 | 25 mm GI Flange set (L.R) |
| 65 | Collar set (Top and Bottom) (L.R) |
| 66 | 25 mm MS Clamp set (L.R) |
| 67 | 25mm GI Bend (PWD SOR 2024-25 M-0455) |
| 68 | 25mm GI Tee (PWD SOR 2024-25 M-0461) |
| 69 | 25mm GI Coupling (PWD SOR 2024-25 M-0467) |
| 70 | 32mm PVC Coupling (PWD SOR 2024-25 M-0883) |
| 71 | 32 PVC Ball Valve (L.R) |
| 72 | 32mm PVC Elbow (PWD SOR 2024-25 M-0889) |
| 73 | 32mm PVC TEE (PWD SOR 2024-25 M-0901) |
| 74 | 25mm GI Elbow (PWD SOR 2024-25 M-0449) |
| 75 | Nylon Rope |
| 76 | Supply and delivery and fixing of 1000 Litres HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., 1000 litres capacity |
| 77 | GST 18% Please Enable Macros to View BoQ information |
