|
| 1 | Excavating over areas not exc 1.5 mtr in depth and getting out soft/loose soil complete all as specified and as directed. |
| 2 | Description same all as per item No 1 here-in-before but exc 1.5 mtr depth, complete all as specified and as directed. |
| 3 | Surface dressing not exc 15 cm deep in soft / loose soil and getting out exceeding 50 mtrs in soil complete all as specified and as directed. |
| 4 | Returning filling including spreading, levelling, watering and well ramming in layers not exc 25cm soft / loose soil complete all as specified and as directed. |
| 5 | Removing excavated soil exceeding 250 mtr but not exc 500 mtr distance and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed. |
| 6 | M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate as in foundation filing, sub base of floor complete all as specified and as directed. |
| 7 | M&L for treating the backfill in contact with foundation at the rate of 7.5 ltrs of emulsion per square metre of vertical surface complete all as specified and as directed.Note : Area of the sub structure in contact with backfill to be measured. |
| 8 | M&L for treating the top surface of filled earth as in floor at the rate of 5 ltrs of emulsion per square metre of surface complete all as specified and as directed. |
| 9 | M&L for treating the soil under plinth protection at the rate of 5 ltrs of emulsion per square metre of surface area complete all as specified and as directed. |
| 10 | M&L for treating the soil along with external perimeter of building at the rate of 2.25 ltrs of emulsion per metre of the perimeter wall complete all as specified and directed |
| 11 | M&L for RCC M-25 (design mix) using 20mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 12 | M&L for RCC M-25 (design mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 13 | M&L for RCC M-25 (design mix) using 20mm graded stone aggregate as in lintal band at any height complete all as specified and as directed. |
| 14 | M&L for RCC M-25 (design mix) using 20mm graded stone aggregate as in slabs supported on walls, roof beams etc and the like complete all as specified and as directed. |
| 15 | M&L for RCC M-25 (design mix) using 20mm graded stone aggregate as in chajjas, shelves etc and the like complete all as specified and as directed. |
| 16 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and as directed. |
| 17 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surface complete all as specified and as directed. |
| 18 | M&L for Formwork to sides and soffit of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc rough finished complete all as specified and as directed. |
| 19 | M&L for Formwork to soffits of suspended slabs such as roof slab etc not exc 200mm thick for fair finished surfaces of concrete complete all as specified and as directed. |
| 20 | M&L for Formwork to chullah hood, chajjas, troughs and similar items including edges complete all as specified and as directed. |
| 21 | M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide complete all as specified and as directed. |
| 22 | S&F TMT bars of 10mm dia and over in reinforcement for concrete cut to length bent to shape required including cranking bending spirally hooping for columns, hooking ends and binding with mild steel annealed wire not less than 0.90 mm dia or securing with clips and as straight in groves complete all as specified and as directed. |
| 23 | M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in strriups, spaces, nibs and binders complete all as specified and as directed. |
| 24 | M&L for brickwork with fly ash bricks (old size), straight or curved on plan exc 6 mtr mean radius, built in cement mortar 1:6 complete all as specified and as directed. |
| 25 | M&L for half brick thick wall fly ash bricks (old size), straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified and as directed. |
| 26 | M&L for 5mm thick rendering in CM 1:3 on ceiling surface plaster complete all as specified and as directed. |
| 27 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work finished even and fair without using extra cement complete all as specified and as directed. |
| 28 | Rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surface mixed with water proofing compound @ 200 ml per bag of cement or as per manufacturer's instructions, finished even and fair without using extra cement complete all as specified and directed. Note : WPC shall be measured & paid separately. |
| 29 | Preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and as directed. |
| 30 | Preparation of newaly plaster surface of wall and applying two coats of oil bound distemper on 2mm thk wall putty complete all as specified and as directed. |
| 31 | Preparation of newaly plaster surface of wall and applying two coats of cement base paint including one coat of primer complete all as specified and directed. |
| 32 | M&L for hardcore of gauge not exc. 63 mm of broken stone deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 33 | M&L for 75mm thick cement concrete 1:3:6 type C-2 using 20mm graded stone aggregate in plinth protection and path finished even and smooth without using extra cement including necessary formwork and cutting of joints complete all as specified and as directed. |
| 34 | M&L for plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in surface channel or surface drain including forming and finishing with extra cement including taking down existing concrete complete all as specified and as directed. |
| 35 | S&F for kota stone slab 18-20 mm thick in riser of steps, skirting, dado and on pillars, fixed over and including 10mm thick rendering in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including polishing complete all as specified and as directed. |
| 36 | M&L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed. |
| 37 | Description same all as per item No 36 here-in-before but for skirting with 10mm thick rendering in CM 1:4, complete all as specified and as directed. |
| 38 | M&L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n exc 0.18 Sqm, in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 39 | M&L for glazed ceramic coloured wall tiles in vertical surface 450 x 300 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed. |
| 40 | M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed. Note : WPC to be mesured and paid separately under paaropriate item. |
| 41 | Cleaning the dust, dirt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 Ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed. |
| 42 | M&L for laying of minimum 3mm thick APP membrane of (reinforced with non-woven fabric polyester type weight not less than 150 grams/Sqm) and minimum weighing 3 Kg/Sqm shall be done using butane torch maintaining 100mm side overlap and 150mm end overlap, sealing all overlaps and bonded to the surface by fusing and bonding torchon method complete all as specified and as directed.Note : All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative. |
| 43 | Supply only Liquid Water Proofing Compound (ISI marked) complete all as spesified and directed. |
| 44 | M&L for 40mm thick brick tiles laid over & including 15mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 5% by weight of cement or as per manufacturer's instruction and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assesible roof area complete all as specified and as directed. |
| 45 | S&F Factory made solid PVC door frame of size 50mm x 95mm made out of 5mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted of plain colour PVC sheet and edges will be painted to match with printed sheet complete all as specified and as directed. |
| 46 | S&F Factory made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles) with 2 / 4 / 6 raised panel design with 2mm thick 3D wood grain moulded PVC Sheet Polyurethane painted on the front face and 2mm prelam PVC Sheet on back face supplying and fixing in frame at site complete all as specified and as directed. |
| 47 | S&F Aluminium Section powder coated of colour as approved fixed type ventilators with one or more rebates including joining cleat for fixing etc complete all as specified complete all as specified and as directed. |
| 48 | S&F mild steel framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified and as directed. |
| 49 | M&L preparation of newly steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 50 | M&L for fabrication & fixing of powder coated aluminium door with frame of section size 85mm x 44.50mm x 1.56mm thick, shutter with top & bottom rail of section 113.4mm x 44.45mm x 1.56mm thick and stiles & middle rails of section 85.5mm x 44.45mm x 1.56mm thick with suitable locking arrangement with lock (Make : Godrej/Link) 6 lever and self closing devices with rebates including jointing cleats of suitable section for fixing builders hard ware fittings door spring (Make : Sandhoo/Samrat), glazing clips rubber packing for air lock purpose, powder coated aluminium snap beading screw for fixing glass panel in the same shutter covered with fully selected quality tinted glass 5.5mm thick with rubber packing each shutter shall be provided with two numbers decorative type aluminium handle of 150mm long complete all as specified and directed. |
| 51 | S&F Aluminium section powder coated of colour as approved openable sliding type three track window/ventilators with sliding shutter and frame with aluminium section of size including 5mm thick tinted glass and mosquito proofing net as indicated below complete all as specified & directed :-(i) Frame section 92 x 29.5 x 1.2mm.(ii) Shutter top bottom and side rails 40 x 20 x 1.2mm.(iii) Glass 5mm thick one side reflective glass and other side visible of with rubber gasket with clips and hold fast 04 numbers for each window including necessary handles, tower bolt etc. complete. (iv) Aluminium grill 7.5mm dia design no. DG - 102 make DEDO grill or design no AL - 103 make fixed to aluminium section 50 x 20 x 1.5mm in existing opening. (v) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed with tinted tacks or galvanized wire staples complete. |
| 52 | S&F 100mm long stainless steel butt hinges with steel pin complete all as specified and directed. |
| 53 | S&F for 200mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed. |
| 54 | S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed. |
| 55 | S&F 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or exturded section and fixing bolts and 16mm dia bolt of sliding bolts of extruded sections complete all as specified and directed. |
| 56 | S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 Sqm in each pane complete all as specified and directed. |
| 57 | S&F vitreous chine white wash down water closet pan (pedestal pattern) including fixing bolts, plastic water colset white seat cover clossed pattern with flat bottom (white colour) and cover and mild steel chromium plated of aluminium hinging device complete all as specified and directed. |
| 58 | S&F WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including 'P' or 'S' trap complete all as specified and directed. |
| 59 | S&F for vitreous china wash and basin, white, flat back, size 550mm x 400mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting, pipe and union complete all as specified and directed. |
| 60 | S&F CP Bottle Trap (with internal partition 32mm size with 300mm and 190mm long wall connection pipe and wll flange complete all as specified and directed. |
| 61 | S&F vitreous china Urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including 32mm dia CP coupling, CP urinal spreader with CP pipe up to angle cock, waste pipe etc with all fixing arrangement and pointing around urinal back complete all as specified and directed. |
| 62 | M&L for 500 ltrs rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed. |
| 63 | S&F for 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed. (Minimum weight 20mm-210 grams) |
| 64 | S&F 15mm bore GI tubes 'medium grade' galvanised with all fittings and fixed to walls and ceiling or laid in floor, complete all as specified and as directed. |
| 65 | S&F 20mm bore GI tubes 'medium grade' galvanised with all fittings and fixed to walls and ceiling or laid in floor, complete all as specified and as directed. |
| 66 | S&F 25mm bore GI tubes 'medium grade' galvanised with all fittings and fixed to walls and ceiling or laid in floor, complete all as specified and as directed. |
| 67 | S&F for 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 68 | S&F for 15mm bore bib taps chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipes or brass ferrule complete all as specified and as directed. |
| 69 | S&F CP angle stop valve or cock of 15mm bore screwed down for high pressure with crutch or butter fly handle, screwed both end for iron pipes complete all as specified and directed.. |
| 70 | S&F fancy type Pillar tap 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with long shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 71 | S&F PVC connection 15mm bore 60cm long with brass nut at each side complete all as specified and directed. |
| 72 | S&F 5mm thick bevelled edge looking mirror of selected quality glass, mounted on wall with and including four Nos stainless steel studs of adequate size complete all as specified and directed. |
| 73 | S&F 600mm long tubular towel rail, brass chromium plated of 20mm dia complete all specified and as directed. |
| 74 | S&F 15mm bore CP fancy stop valve (Concealed type) with long shanks and cup fixed with pipes complete all as specified and directed. |
| 75 | S&F 125mm size fancy type chromium plated shower rose with swivel joints and connecting rod including fixing to steel pipe or union complete all as specified and as directed. |
| 76 | S&F for PVC flushing cistern 10 ltrs capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete all as specified and as directed. |
| 77 | S&F for 15mm dia health faucet ABS body with 8mm dia, 1 mtr long flexible tube and wall hook complete all as specified and as directed. |
| 78 | S&F Stainless steel toilet paper holder fancy type complete all as specified and as directed. |
| 79 | S&F 110mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints laid in trench or in floor complete all as specified and as directed. |
| 80 | S&F 110mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 81 | S&F 110mm bore PVC (SWR) bend any radius complete all as specified and as directed. |
| 82 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed. |
| 83 | S&F 100mm outlet dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 84 | S&F 110mm bore PVC (SWR) vent cowl complete all as specified and as directed. |
| 85 | Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed. |
| 86 | M&L for Earthwork in excavation in foundation in trenches exc 1.5 mtr wide and exc. 1.5 mtr depth in soft/loose soil and getting out including forming bottom to required level or slope for laying pipes on concrete bed or for manholes not exc. 10 Sqm on plan complete all as specified and as directed. |
| 87 | Removing excavated material (soil) not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point complete all as specified and as directed. |
| 88 | M&L PCC (1:5:10) type E-2 using 40mm graded stone aggregate as in foudation filling and mass concrete complete all as specified and as directed. |
| 89 | M&L 40mm thick PCC(1:2:4) type B-1 using 20mm graded stone aggregate for floor finishing cement concrete surface even and smooth with using extra cement laid in panels complete all as specified and as directed. |
| 90 | M&L 38mm width and 3mm thick glass dividing strips for laying in floor in panels complete all as specified and as directed. |
| 91 | M&L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even & smooth without using extra cement including water proofing compound @ 3% by weight of cement complete all as specified and as directed.Note : WPC measured & Paid seperately. |
| 92 | M&L Rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all as specified and as directed. |
| 93 | M&L Rendering 5mm thick in CM (1:3) as in ceilling finished even and smooth without using extra cement complete all as specified and as directed. |
| 94 | M&L for preparation of new plastered surfaces and applying three coats of white wash on Wall complete all as specified and as directed. |
| 95 | M&L plaster 20mm thick in one layer CM (1:4) on concrete surface over roof slab finished even and smooth without using extra cement including water proofing compound @ 3% by weight of cement over and including application of cement slurry @ 3 Kg/Sqm after cleaning,sweeping the RCC slab to remove dust before application of plaster complete all as specified and as directed. Note : WPC measured and paid seperately. |
| 96 | Surface excavation not exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 97 | M&L for Cement Concrete 1:4:8 type D-2 with using 40mm graded stone aggregate as in foundations, filling and mass concrete including taking down existing concrete complete (100 mm thickness) complete all as specified and as directed. |
| 98 | M&L for 80mm thick M-40 grade factory made rubber moulded vibratory compacted cement concrete interlocking paver block in approved design and colour confirming to IS 15658-2006 with grey cement and pigment as approved and laid over on sand cushion and joints filling with sand complete all as specified and as directed. Note : Sand cushion measured and paid seperately. |
| 99 | M&L for factory made coloured chequered designer cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed. |
| 100 | M&L for Cement Concrete 1:2:4 type B-1 with using 20mm graded stone aggregate as in lintels upto 1.5 clear span, cills, steps sersmic and other similar bands plinth courses, string course lacing courses, parapets and railings upto 60cm in height, copings, edging concrete for paver block, kerbs etc complete all as specified and as directed. |
| 101 | Concrete bed to drain pipes in PCC (1:3:6) type C2 using 40mm graded stone aggregate including packing under and haunching against the side of pipe after they are laid, jointed and tested for 150mm bore of pipe complete all as specified and as directed. |
| 102 | M&L Reinforced concrete pipe class NP3 with collars, duly ISI marked (IS 458:2003), laid in trenches and jointed in cement mortar (1:1) for 150 mm bore of pipe complete all as specified and as directed. |
| 103 | PCC (1:3:6) type C-2 using 40mm graded crushed stone aggregate as in foundation of manholes complete all as specified and as directed. |
| 104 | Brick work with fly ash, old size straight or curved on plain not exc. 6 mtr mean radius built in cement mortar (1:4) for wall complete all as specified and as directed. |
| 105 | Extra over for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends complete all as specified and as directed. Note : Inner girth shall be measured. |
| 106 | Precast RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in manhole/ drain cover slab set in cement mortar 1:4 complete all as specified and as directed. |
| 107 | Septic Tank, excavation in ordinary soil, foundation, PCC 1:2:4, brick work in CM 1:4, RCC slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame Vent shaft etc for 10 users complete all as specified and as directed. |
| 108 | Soakage Well, excavation in any type of soil, foundation in PCC 1:3:6, walls of honeycombed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonry in CM, RCC cover slab in M-25/SFRC cover interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.20 mtr dia x 3.00 mtr effective depth, complete all as specified and as directed. |
| 109 | PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate as in surface channel and drains complete all as specified and as directed. |
| 110 | Extra over for forming fair finished drain or channel 45 cm inner girth in cement concrete using extra cement including forms, moulds mitered/stopped ends complete all as specified and as directed. Note : Inner girth shall be measured. |
| 111 | M&L for point wiring with FRLS/FRLSH PVC insulated unsheathed stranded copper conductor 1.5 Sqmm (nominal area) 1100 volts grade alongwith one single run of same size and type of copper wire as contineous earth wire to common earth dolly drawn in and including non metallic PVC rigid medium grade concealed with all fixing accessories of 20mm dia and including modular sunken box, cover plate/frame for any module as required at site with all accesories and making good to disturbed conceal surfaces for one light / fan / bell point controlled by switch, complete all as specified and directedNote : (a) Colour code of wire shall be strictly followed, Red for phase, Black for neutral and Green for earth wire. (b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surface.(c) Only 4 point shall be allowed in one circuit. |
| 112 | Description same all as per item No 111 here-in-before but for one point for socket outlet 5 amps on independent board |
| 113 | Description same all as per item No 111 here-in-before but for one point for socket outlet 5 amps same board |
| 114 | Description same all as per item No 111 here-in-before but for one point for one socket outlet 16 amps on independent board with 4.0 Sqmm cable and 4.0 Sqmm earth wire |
| 115 | S&F Celing Rose surface bakelite type 65 x 20 mm two to three terminals complete all as specified and directed |
| 116 | S&F Lamp Holder, PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed |
| 117 | S&F Modular Swtich 1 way, 6 Amps, 230 Volts AC,, One way complete all as specified and directed |
| 118 | S&F Modular Socket outlet 2-in-1, 3 pin, 6 Amps, flush type 2 module complete all as specified and directed |
| 119 | S&F Modular Switch flush type 16 Amps, 230 Volts, single pole one way complete all as specified and directed |
| 120 | S&F Modular Socket outlet 2-in-1, 3 pin, 5 & 16 Amps, flush type 2 module complete all as specified and directed |
| 121 | S&F modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size including connection complete all as specified and directed |
| 122 | S&F sheet metal enclosure for MCB 415 Volts, 4 way, triple pole and neutral with rated bus bar, double door on wall with and including suitable flat iron clamps duly grouted/fixed flush in the wall complete all as specified and directed |
| 123 | S&F sheet metal enclosure for MCB 240 Volts, 4 way, single pole and neutral with rated bus bar, double door on wall with and including suitable flat iron clamps duly grouted/fixed flush in the wall complete all as specified and directed |
| 124 | S&F MCB TP&N triple pole and neutral 63 Amps, 415 Volts, 'B' series, 10 KA breaking capacity and connection in DB complete all as specified and directed |
| 125 | S&F MCB Single Pole and neutral 40 to 63 Amps, 240 Volts, 'B' series, 10 KA breaking capacity and connection in DB complete all as specified and directed |
| 126 | S&F MCB Single Pole and neutral 6 to 32 Amps, 240 Volts, 'B' series, 10 KA breaking capacity and connection in DB complete all as specified and directed |
| 127 | S&F Desert Cooler electric driven (single phase), having nominal air flow capacity of 5000 Cum per hour (or nearest size) Steel body alongwith angle iron stand for mounting on Desert Cooler complete all as specified and directed |
| 128 | S&F Ceiling Fans complete with blades, down rods and accessories, 230 Volts, 1200mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE, 5 Star rated with brushless direct current motor (BLDC) complete all as specified and directed |
| 129 | S&F wall mounted fan 400mm, 230 Volts, five star rated complete all as specified and directed |
| 130 | M&L for energy saver LED batten fitting 20 Watt, 120 Lumen/Watt, 230 Volts, Single tube mounting including with electronic driver LED printed board, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection two core copper cable from ceiling rose to LED light fiting complete all as specified and directed |
| 131 | M&L for energy saver LED batten fitting 10 Watt, 230 Volts, Single tube mounting including with electronic driver LED printed board, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection two core copper cable from ceiling rose to LED light fiting complete all as specified and directed |
| 132 | Supply & fixing electric water heater, storage type steel body with innner tank and heating element upto 2 KW capacity 25 litres, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc complete all as specified and directed |
| 133 | M&L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion, complete all as specified and directed.Note : (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I.(ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. any varriation in quantity shall be adjusted. |
| 134 | Supply, laying and testing Cable XLPE insulated, screened, PVC bedded, galvanized steel strip of wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm, 4 core complete all as specified and directed |
| 135 | Supply, laying and testing Cable XLPE insulated, screened, PVC bedded, galvanized steel strip of wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm, 2 core complete all as specified and directed |
| 136 | M&L for 40mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/poles/under road/floor etc for cable protection, complete all as specified and directed |
| 137 | M&L for sand cushioning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable in trenches complete all as specified and directed |
| 138 | Supply and laying of well burnte bricks, sub calass 'B' laid flat in trenches for protection of cable complete all as specified and directed |
| 139 | Supply & Fixing LED Building Security Light fitting 35 Watt, 230 Volts, AC outdoor type with high pressure die cast aluminium hosing and heat resitent complete with driver, lamp bracket with impact and corrosion resistent including thermal management in multiple optics complete with IP 65/66 protection including bracket for street light made out of 40mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50 x 6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 140 | Supply & Fixing Exhaust Fan 300mm sweep AC single phase 230 Volts Metallic Steel body Range complete with lades, frames and louvers including required length and size of copper stranded conductor for connection from ceiling rose to connector of fan with provision of making hole in wall complete with grouting of nuts, bolts and washers and all other accessories, complete all as specified and directed |
| 141 | M&L for Masonry Valve Chamber 600 x 600 x 600 for 100-80 mm dia Gate Valve including excavation and earth work in any type of soil and 100mm thick PCC 1:4:8 type D2 foundation, brick work in CM (1:6) plastering internal surface 15mm thick in CM (1:4) PCC (1:3:6) type C1 coping 50 x 50 x 6mm angle iron 6mm thick MS plate cover complete with locking arrangement painting steel and iron surface with two coat of synthetic enamel paint over a coat of zinc chrome primer all as shwon on drawing complete all as specified and directed |
| 142 | M&L for Drilling/Cutting and Tapping Cast Iron/FI/GI water mains (in position) for branch connections of the internal dia complete all as specified and directed |
| 143 | Supply & Fixing Gun Metal Globe of Gate Valve with iron wheel head, screwed both ends for iron pipe or for unions and fixed of dia 25mm complete all as specified and directed |
| 144 | S&F tubes medium grade of bore size 25mm including all fixing accessories and laid in floor complete all as specified and directed |
| 145 | Schedule of Credit (MINUS) Rs. 0.00 B/F from Serial Page No. ____ [Note : Details of items for schedule of credit is given on Srl Page No. ___] This amount shall be automatically deducted to arrive at tendered sum Please Enable Macros to View BoQ information |
