|
| 1 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 2 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 3 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed All kinds of soil: 1 meter from cutting edge |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement: 3 coarse sand 6 graded stone aggregate 20 mm nominal size) 20% Boulders |
| 6 | Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 8 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead. With cement mortar 1:4 (1 cement: 4 coarse sand) |
| 9 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 10 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primerInside: Qty vide Item No 2 marked (A) Total |
| 11 | Finishing walls with Acrylic smooth exterior paint of required shade Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) |
| 12 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In all colours, shades, except White, Ivory, Fume Red Brown |
| 13 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile600x600 mm |
| 14 | Renewing glass panes, with wooden fillets wherever necessary: 14.7.1 Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm) |
| 15 | Painting with synthenic enamelpaint of approved brand and manufacture to give an even shade or more coats on new works |
| 16 | Painting on G.S Sheets with synthetic enamel paint of approved band and manufacccture of rquried colour to give a even shade on New work (two or more coats) including a coat of approved steel primer but exculding a coat of mordant solution. |
| 17 | Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work |
| 18 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 250x10 mm |
| 19 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete.: 150x10 mm |
| 20 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm |
| 21 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: 100 mm |
| 22 | Providing and fixing IS: 1341 marked M.S. heavy weight - Butt Hinges with necessary screws etc., complete: 100x75x3.50 mm |
| 23 | Sanitary Itmes Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 40 mm dia. nominal bore Medium (Flag) |
| 24 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS: 8931 |
| 25 | Providing and fixing brass bib cock of approved quality. 15 mm nominal bore |
| 26 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittingscomplete: Flexible pipe 40 mm dia |
| 27 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms |
| 28 | Providing and fixing 5.5 Grating of approved quality with all necessary fittings and accessories. Square type |
| 29 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete |
| 30 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm |
| 31 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 25 mm nominal bore |
| 32 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 20 mm nominal bore |
| 33 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm nominal bore |
| 34 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore |
| 35 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 36 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank 151: 12701 marked, with cover and suitable locking arrangement and making necessary holes for Inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 37 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer in Charge |
| 38 | Plumber & Helper engaged for repair of old saintary work and refixing them whereever required complete job.Helper |
| 39 | Plumber |
| 40 | Carpenter & Helper engaged for repair of old doors, windows and refixing them whereever required complete job.Carpenter |
| 41 | Helper |
| 42 | Rewiring for light point/fan/exhaust fan point/call bell point with f 1.5sq FRLS PVC insulated copper conductor single core cables with 1.5 sqmm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required. Group A |
| 43 | Providing Wire 10 sqmm NSI |
| 44 | Providing Wire 4 sqmm NSI |
| 45 | Providing Wire 2.5 sqmm NSI |
| 46 | Providing Wire 1.0 sqmm NS |
| 47 | Supplying and fixing following way. Three pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as zequired. (But without MCB/RCCB/Isolator) Double Door. A. 4 way (4+12), Double door. |
| 48 | Supplying and fixing following rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.a) MCB single pole 6 A to 32 A |
| 49 | b) MCB Double pole 63 A |
| 50 | Supplying and fixing following modular switch/socket on the existing modular plate & box as required a) 5/6 A Switch |
| 51 | b) 15/16 A Switch |
| 52 | c) 3 Pin 5/6 A Socket Outlet |
| 53 | d) 6 Pin 15/16 A Socket Outlet |
| 54 | Supplying and fixing following modular base & cover plate on the existing modular metal box as -quired a) 1 or 2 module |
| 55 | b) 3 module |
| 56 | c) 4 module |
| 57 | d) 6 module |
| 58 | e) 8 module |
| 59 | f) 12 module |
| 60 | Supplying and fixing following modular GI Box in recess as required a) 1 or 2 module |
| 61 | b) 3 module |
| 62 | c) 4 module |
| 63 | d) 6 module |
| 64 | e) 8 module |
| 65 | f) 12 module |
| 66 | Supply installation testing and commissioning of Table Fan 230V 28 W with Speed RPM 350 with minimum Air delivery 220 CMM including wiring the downrods of standard length(Upto 30 cm) with 1.5 sq.mm FR PVC insulated copper conductor,single core cable including providing and fixing phenolic laminated sheet cover on the Fan Box etc as Require |
| 67 | Supply installation testing and commissioning of IP:20 Aluminium Batten 20W-22 W +-1W LED Surface Mounted 4 ft. with system lumen efficacy of 100 lm/W and P.F>0.9 THD <20% CCT 6500K, CRI 80. The LED should have life of 50000 Burning Hours at L70.The input voltage shall be 150 V to 270 V. The fixture should have inbuilt surge protection of 2KV.Certification-LM 79 and LM 80. |
| 68 | Supply installation testing and commissioning of LED Bulbs with holders 14-20 W with 1.5 sq.mm FR PVC insulated,copper conductor,single core cable including all necessary fittings andaccessories. |
| 69 | Supply installation testing and commissioner of LED Bulbs with holders 14-20 with mm FR PVC insulted, copper conducter, sigle core cable including necessary fitting and acesserios |
| 70 | Electrician & Helper engaged for repair of old electric items complete jobElectrician |
| 71 | Helper |
| 72 | Carriage of Sand avg 58 Km by MT |
| 73 | Carriage of Agg avg 28 Km by MT |
| 74 | Carriage of Stone avg 28 Km by MT |
| 75 | Carriage of Sand avg 300m by HL |
| 76 | Carriage of Agg avg 300m by HL |
| 77 | Carriage of Stone avg 300m by HL Please Enable Macros to View BoQ information |
