|
| 1 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified incl dismanling of existing AC sheets any type complete all as specified and directed. |
| 2 | Dismantling of old stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | M&L for Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight incl demolition and complete all as specified |
| 5 | M&L for glazed ceramic coloured tiles 450x350x7mm thick, in vertical surfaces such as skirting and dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl rendering 10mm thick in CM (1:4) and finished rough complete all as specified and directed. |
| 6 | M&L for non skid ceramic, parking tile, heavy duty coloured Endura tile dotted, of size 300mmx300mmx10mm, top layer glazed made in any type of cement and pigment, in required patterns in floor etc set & jointed in neat cement slurry & pointed in white or coloured cement mixed with pigment to match the shade of tile over and including 15mm thick screed bed or bedding layers in CM 1:6 for laying floor finishes, complete all as specified and directed. |
| 7 | M&L for non skid ceramic coloured tiles (joint free) 7 to 8 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 8 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular), light shade, double charged, polished, area of each tiles exceeding 0.42 sqm not exceeding 1.00sqm each, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over screed bed or bedding layers of mortars 15 mm thick in CM 1:6 for laying floor finishes all as spd and directed incl dismantling floor, hearth or wall tiling complete all as specified and directed. |
| 9 | M&L for light shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm n exc 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in skirting etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over 10 mm thick renering in CM 1:4 for laying floor finishes all as spd and directed incl dismantling floor, hearth or wall tiling complete all as specified and directed. |
| 10 | M&L for 16-18mm thick Udaipur Green / (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, urinal partions and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl edge moulding to give high gloss finish complete all as specified and directed. |
| 11 | Taking down chowkats or frames exc 1.5 sqm but n exc 4 sq.m with shutter (without taking off shutters from the frame) complete all as specified and directed. |
| 12 | Taking down chowkats or frames not exc 1.5 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed. |
| 13 | S&F Pressed steel frames for doors, 105x60mm size, made out of 1.25mm thick sheet, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl filling of the frame with plain cement concrete complete 1:3:6 type C-0 complete all as specified and directed |
| 14 | S&F Pressed steel frames for doors, 125x60mm size, made out of 1.25mm thick sheet,with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl filling of the frame with plain cement concrete complete 1:3:6 type C-0 complete all as specified and directed |
| 15 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 16 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 17 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative Flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge (Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 18 | S&F 35mm thick single piece Factory made wire gauge door shutters including of wire cloth (steel & aluminium XPM) manufacturing by PVC sheets printed 5mm thick on both side on frame made out of M.S tube 19 SWG, size 19mm x19 mm complete in all respect with lock rail and beautified by PVC beading all around fixed with PVC solvent cement complete all as per Drawing No CEPZ/TD-378/ Sheet 1/1 dated 27/12/2011 complete all as specified and as directed . |
| 19 | M&L for Framed work as in doors or gates of angle or other section conforming to Fe 410-W (Gde-E- 250), quality 'A' with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 20 | S& F in repairs Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg, welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts fixed in PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed. |
| 21 | All as per description of serial item No. 20.00 here-in-before but supplied & fixed as in repairs |
| 22 | S& F in repairs 18 mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet for cupboard / Kitchen cabinet shutters and frames having high natural fiber content 25 to 30% wood colour sheets with density not less than 500 kg/ cum and the weight of sheet of 1 sqm should be 11 kg (+/- 5%) manufactured by ISO 9001-2015 certified company. the sheet should be 100% water proof, termite proof, fire retardant, manufacured by single layer extrusion process with excellent screw holding capacity and shore D hardnesscomplete all as specified and directed. |
| 23 | S & F Continuous (piano) hinges 40 mm flap when open, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 24 | M&L 100 mm Hasp and staple,aluminium anodised, including bolt to hinge plate and fixed with screws complete all as specified and directed.. |
| 25 | S&F 3 mm sheet figured (frosted) glass,pin headed, ordinary quality in square or rectangle n. exc 0.5 sqm each pane fixed to framed work with oil putty/wooden beadscomplete all as specified and directed. |
| 26 | S&F 4.0 mm sheet glas, ordinary quality in square or rectangle n. exc 0.5 sqm each pane fixed to framed work with solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturer complete all as specified. |
| 27 | S & F Stainless steel wire cloth,0.56 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with stainless steel wire staples or rubber/all beads complete all as specified and directed. |
| 28 | S F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.. |
| 29 | S F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.. |
| 30 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 31 | S&F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 32 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy acomplete all as specified and directed. |
| 33 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy acomplete all as specified and directed. |
| 34 | S&F helical door spring, mild steel, 150mm size, fixed to steel frame with screws/nuts bolts as directed complete all as specified. |
| 35 | S & F 100 mm long Butt hinges, 100mm long, medium weight cold rolled mild steel, ISI marked complete all as specified and directed. |
| 36 | S&F magnetic ball catcher for cupboards fixted with brass screws complete all as specified and directed. |
| 37 | S&F in repairs 20 mm bore stainless steel drapery rods with 1 mm thick including fancy type funnels & brackets for hanging curtains complete all as specified and directed. |
| 38 | S&F stainless steel peg set of six of size 400mmx30mmx3mm size fitted with machine screw and wooden and plastic cleats (minium wt 190gms) complete all as specified and directed. |
| 39 | Taking down cement plaster, hacking for key, raking out joints of old brick work built in cement mortar and scrubbing down with water etc. to receive plaster complete all as specified and directed. |
| 40 | M&L for 15 mm thick rendering in two layers (10 mm thick in cement mortar 1:6 and 5 mm thick in CM 1:4) with water proofing compound) mixed with WPC @ 200 ml/ bag of cement on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.Note: Water proofing compound shall be measured and paid for separately. |
| 41 | M&L for rendering 10 mm thick plaster in cement mortar (1:6) on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed. |
| 42 | M&L for rendering 10 mm thick plaster in cement mortar (1:3) on concrete surfaces of chhajja, facia, roof projections etc. incl roughening of surfaces and finished even and smooth without using extra cement complete all as specified and directed. |
| 43 | M&L for 5 mm thick rendering in cement mortar (1:3) on concrete surfaces of ceiling/chajjas/fascia etc. and finished even and smooth without using extra cement & preparation of newly plastered surface and applying three coats of white wash complete all as specified and directed. |
| 44 | Supply only liquid water proofing compound complete all as specified & directed. |
| 45 | M&L for preparation of new plastered surfaces of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed. |
| 46 | M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 47 | M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified and directed. |
| 48 | M&L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and directed. |
| 49 | M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 50 | M&L for two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed |
| 51 | M &L for preparation of New surfaces of iron or steel of any discription exc 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 52 | M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 53 | M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 54 | M&L for Brick work with fly ash bricks (Old Size bricks), in half brick thick walls, straight or curved on plan exc 6 mtr mean radius built in CM (1:4) complete all as specified and directed. |
| 55 | Removing existing roof treatment (any type) by picking, sweeping, brushing and washing with water, to remove loose dust and apply neat cement slurry with 3.00 kg of per sqm complete all as specified and as directed. |
| 56 | M&L for rendering 20 mm thick cement plaster in cement mortar 1:4 on roof top or concrete surfaces, finished even and smooth using extra cement, with liquid water proofing compound, as per manufacturer's instructions @ 0.200Ltrs in 50 kg of cement coating, after cleaning, brushing and washing with water, complete all as specified and directed.Note : Water proofing compound shall be measured and paid sepsretaly. |
| 57 | M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjas / canopy / parapet wall, to be executed through approved applicator of the membrane manufactured with following specifications, complete all as specified and directed :-(a) Cleaning the top surface of RCC roofing properly with water.(b) Applying bitumen primer @ 0.30 Litre / Sqm, manufactured by the same agency as that of APP with a density 0.87-0.89 KG / Litre at 25 degree centigrade on prepared surface.(c) Laying of membrane not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 KG/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10cm overlap and 15cm end lap.(d) Top of membrane shall be provided with solar reflective bituminous aluminum paint @ 0.10 KG / Sqm as prescribed by manufacturer of membrane.(e) APP Membrane shall be stick inside parapet where available by cutting, chases and sealed with PCC 1:2:4, type B-0, complete all as specified and directed. |
| 58 | S&F in Bib taps with flange for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed complete all as specified and directed. |
| 59 | S&F 15mm dia pillar tap cast copper alloy fancy type capstan heads chromium plated screwed down high pressure with or without letered \\"Hot or Cold\\" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc. complete all as specified and directed. |
| 60 | S&F in repair Stop valve/ Angle valve with flange cast copper alloy (ISI Marked) fancy type, chromium plated screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 61 | S&F in repair Stop valve/ Angle valve with flange cast copper alloy (ISI Marked) fancy type, chromium plated, with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 62 | S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed with 20 mm dia pipe complete all as specified and directed. |
| 63 | All as per description of serial item No. 61.00 here-in-before but supplied & fixed as in repairs |
| 64 | S&F in repair Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed with 15 mm dia pipe complete all as specified and directed. |
| 65 | S&F in repairs water mixer 3-in-1 (three inlets) with telephonic shower, chromium plated brass, suitable & fixed to 15 mm bore pipe or union, screwed down, high pressure screwed for iron pipe for mixing hot and cold water complete all as specified and directed. |
| 66 | S&F in repairs chromium plated brass central hole single lever WHB Mixer 15 mm bore for mixing hot and cold water with 450 long braided house 20 cartriage size screwed down, high pressure screwed for iron pipe complete all as specified and directed. |
| 67 | S&F 600 mm x 450 mm mirror of selected quality 5 mm thick glass with PVC frame fixed with chromium plated brass screws and cup washers with PVC beading all as specified and directed |
| 68 | S&F in repairs PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified and directed. |
| 69 | All as per description of serial item No. 20.00 here-in-before but supplied & fixed as in repairs |
| 70 | S & F in repairs Vitreous china wash basin of size 550x400mm, white flat back, including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread , all as spd and directed |
| 71 | S & F in repairs Vitreous china wash basin of size 630x450mm, white flat back, including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread , all as spd and directed |
| 72 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, Incl Supply and fixing of PVC seat and cover for pedestal pan complete all as specified and as directed. |
| 73 | All as per description of serial item No. 61.00 here-in-before but supplied & fixed as in repairs |
| 74 | Supply & fixed in repair Vitreous china squatting pan of pattern, long pan, 'Orissa pattern', size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision concrete bedding CI floor trap etc.complete all as specified and directed. |
| 75 | Supply & fixed ,Vitreous China Urinal, Half stall type, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, , flush pipe, grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) fixed incl supply and fixing of CP coupling, waste pipe and cp brass spreder all necessary fittings complete all as specified and directed. |
| 76 | S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 77 | Supply & fixed CP Brass swivel shower rose 200x200 mm size with brass arm 450-550mm long complete all as specified and directed. |
| 78 | S&F in repair CP Brass Hand Shower (Health Faucet) with 8 mm dia,1.2 m long Long Flexible Tube Chrome Finish & Wall Hook for Water closet complete all as specified and directed. |
| 79 | S& F in repair Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified. |
| 80 | S&F in repair towel rail brass chromium plated 600 mm long fixed with SS screws complete all as specified and directed. |
| 81 | All as per description of serial item No. 61.00 here-in-before but supplied & fixed as in repairs |
| 82 | S&F in repairs Soap dish 120mm x 85mm (material SS finish, glossy) fixed to plugs with CP brass screws complete all as specified and directed. |
| 83 | S&F Stainless steel Grating doom 100mm dia with waste hole complete fixing in floors complete all as specified and directed. |
| 84 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 85 | Taking up or down steel tubing and connections, 15 mm bore including cleaning for refixing or removal to store complete all as specified and directed. |
| 86 | Taking up or down steel tubing and connections, 20 mm bore including cleaning for refixing or removal to store complete all as specified and directed. |
| 87 | S&F Tubes, 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 88 | S&F Tubes, 20 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 89 | S & F PVC (SWR) pipes 110mm single socked, in any length with rubber ring joints fixed to wall/laid in trenches complete all as specified and directed. |
| 90 | S & F PVC (SWR) pipes 75mm single socked, in any length with rubber ring joints fixed to wall/laid in trenches complete all as specified and directed. |
| 91 | Supply & fixed PVC (SWR) 'P' trap, dia of outlet in 100 mm, plain excluding grating, but including jointing with solvent cement complete all as specified & directed. |
| 92 | Supply & fixed 110 mm bore PVC (SWR) bends any radius, with or without excess door complete all as specified & directed. |
| 93 | Supply & fixed 75 mm bore PVC (SWR) bends any radius, with or without excess door complete all as specified & directed. |
| 94 | Supply & fixed PVC (SWR) floor trap, dia of outlet in 75 mm, plain excluding grating, but including jointing with solvent cement complete all as specified & directed. |
| 95 | Supply & fixed 75 mm bore PVC (SWR) vent cowl complete all as specified & directed. |
| 96 | Dismantling of cast iron soil, waste and vent pipes 100/75mm bore dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed. |
| 97 | S&F in repair 100 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,fixed on walls with clamps incl dismantling of CI Pipe complete all as specified and directed. |
| 98 | S&F in repair 75 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,fixed on walls with clamps incl dismantling of CI Pipe complete all as specified and directed. |
| 99 | S&F in repair 50 mm dia sand Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints,fixed on walls with clamps incl dismantling of CI Pipe complete all as specified and directed. |
| 100 | S&F 100 mm bore dia sand cast Cast iron bend, duck foot or heel rest and jointed with neat cement complete all as specified and directed. |
| 101 | S&F 75 mm bore dia sand cast Cast iron bendduck foot or heel rest and jointed with neat cement complete all as specified and directed. |
| 102 | S&F 100 mm dia sand cast Cast iron bend (any radius), diminishing pieces or tapers (larger bore measured) with oval access door and jointed with neat cement paste complete all as specified and directed. |
| 103 | S&F 75 mm dia sand cast Cast iron bend (any radius), diminishing pieces or tapers (larger bore measured) with oval access door and jointed with neat cement paste complete all as specified and directed. |
| 104 | Supply and laying UPVC sewage UDS (under drainage system) pipes 100mm bore single socket, wall thickness not less than 4mm type SN-4 (IS-15328) type 'A' having nominal ring stiffness should be 2KN/Sqm with one coller per length of pipe with all fittings and connecting to existing manholes by cutting out and making the surface good, and making good the existing surfaces. The UDS pipe should meet the requirements as per IS 15328:2003 complete all as specified and directed. |
| 105 | Supply, laying & jointing reinforced concrete pipe, 150 mm bore, class NP-2, laid and jointed complete with collars and testing complete all as specified and directed. |
| 106 | M&L for concrete bed in cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) to drain pipes 100mm bore dia, UPVC including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 107 | M&L for concrete bed in cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregates) to drain pipes 150mm bore dia, including packing under and haunching against the sides of pipe after they are laid and tested complete all as specified and directed. |
| 108 | M&L for precast cement concrete louvres and jallies, 1:2:4 type B-0 (usng 12.5mm graded stone aggregates), 25mm thick (measured solid), set in cement mortar 1:4 including all mouldings but excluding frame complete all as pecified and directed.Note: Pre cast frame shall be measured & paid for separately |
| 109 | S&F GI pipe 32mm dia light grade (in short length) as spout pipe in sunken floor slab laid in slope & fixed to brick wall with PCC (1:2:4) type B-1, complete all as specified & directed. |
| 110 | Material and labour for rendering 15mm thick cement plaster on brick work or concrete surfaces in cement mortar (1:4) including WPC liquid mixed @ 200ml /50 kg of cement in sunken portion with proper slope towards outside and finishing surface even and smooth using extra cement including application of APP based polymeric membrane minimum weight 3Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over primed surface by forced application complete all as specified and as directed.Note : Water proofing compound shall be measured and paid for separately under respctive item. |
| 111 | S&F in repairs cast iron floor trap 75mm dia of outlet, with CP grating including jointing to waste pipe fixed in cement mortar 1:2:4 type B-1 using 12.5mm graded stone aggregate complete all as specified and directed. |
| 112 | M&L for pre-cast cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in cover slabs (for manhole, drains etc) with plain fair faces, including necessary formwork set in CM 1:6, complete all as specified and directed. |
| 113 | S&F in repairs cast iron cowl 50mm bore dia complete all as specified and directed. |
| 114 | M&L in repair for precast steel fiber reinforced concrete factory made manhole cover medium duty weight, sqare size 600mmx600mm thickness not less than 50mm, set in CM 1:6 as in cover slabs (for manhole, drains etc) with iron frame all round of plain fair faces, complete all as specified and directed. |
| 115 | M&L for Septic tank 10 Users designed to carry sewage and sullage water, complete including excavation and earth work in any type of soil, PCC 1:4:8 under foundation, RCC M-30 Design Mix in Roof Slab PVC rungs etc including Vent shaft , manhole openings with cover and making connection etc., of effective depth 1.5 metre and overall depth of 3 metre complete all as described and shown on Drg No CEPZ/C-TD/013 /13 dated 11 -09- 2013 sheet 1/5 to 5/5. |
| 116 | M&L for Soakage wells of size 1.80m dia x 3.00 m depth including excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed brick masonry in CM 1:4 with sub class B bricks, top ring of RCC, M-25 design mix concrete including intercepting chamber and screen chamber made of Brick masonary in CM 1:4, RCC cover slab in M-25 design mix & SFRC MH cover incl interconnecting pipes of RCC/DWC complete filled with brick bats complete all as shown on Drg No CEPZ/C-TD/013 /13 dated 11 -09- 2013 sheet 1/5 to 5/5 . |
| 117 | S&F in repair triple layer Rotational moulded polyethlene water storage tanks of capacity 500 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball PVC valve high pressure with polythene float incl taking down existing water tank of any capacity complete all as specified & directed. |
| 118 | S&F in repair triple layer Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball PVC valve high pressure with polythene float incl taking down existing water tank of any capacity complete all as specified & directed. |
| 119 | S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and directed. |
| 120 | M & L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing, etc., and making good, cutting not exc 20 cm girth in brick walls complete all as specified & directed. Please Enable Macros to View BoQ information |
| 121 | M & L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing, etc., and making good, cutting not exc 20 cm girth in brick walls complete all as specified & directed. Please Enable Macros to View BoQ information |
