|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 2 | M&L for light shade Vitrified Ceramic tiles 8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed of cement mortar 1:4 complete all as specified and directed |
| 3 | M&L for light shade vitrified ceramic tiles minimum 8mm thick (square/ rectangular) polished area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm in vertical surfaces such as skirting, dados and riser etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick back coat of cement mortar 1:3 complete all as specified and directed |
| 4 | M&L for Non Skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar 1:4 over and including 25 mm thick PCC 1:2:4 type B 0 (using 12.5mm graded stone aggregate) as leveling course complete all as specified and directed |
| 5 | Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed |
| 6 | M&L for 16-18mm thick granite of approved quality machine cut polished, bedded and jonted with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in cooking platform, counter of WHB and like over and including 15mm thick screed bed in CM 1:4 including grinding/chamfering and polishing the edges complete all as specified and as directed by Engr-in-Charge |
| 7 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed by Engr-in-Charge |
| 8 | Demolition of precast cement concrete block walling built in CM or cement lime Mortar complete all as specified and as directed |
| 9 | M&L precast cement concrete block masonry exc 10 cm width with solid block PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) and setting in cement mortar 1:4 all as specified |
| 10 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) and removing the rubbish from the site. |
| 11 | M&L for Nominal mix RCC 1:1.5:3 (using 20mm graded stone aggregate) type A1 in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and inshelves and the likecomplete all as specified and directed |
| 12 | M&L formwork for rough finished flat surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed |
| 13 | M&L formwork rough finished surface of concrete to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work n. exc 10 cm wide complete all as specified and directed |
| 14 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 15 | Dismantling plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern in roof coverings complete all as specified and directed |
| 16 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed |
| 17 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws as specified |
| 18 | M&L plain aluminium flat section not less than 0.68 Kg per RM as in wind tie fixed with aluminium self tapping screws complete all as specifed |
| 19 | Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed |
| 20 | S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framming (Beam,Tee, Angle, Channels or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde-E-250) quality-A |
| 21 | S&F mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging, fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 22 | M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed |
| 23 | M&L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and directed |
| 24 | Demolition of cement concrete (Un-reinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed |
| 25 | M&L for PCC (1:2:4) type B-0, using 12.5 mm graded stone aggregate as in roof padding / sunken floors and similar work using WPC @ 3% by wt of cement complete all as specified. (Note : WPC shall be measured and paid separately) |
| 26 | M&L for 20mm thick plaster on RCC roof slab in CM 1:4 including water proofing compound @ 3% by weight of cement complete all as specified (Note : WPC shall be measured and paid seperately) |
| 27 | Supply only liquid water proofing compound |
| 28 | Supplying and applying fibre reinforced, UV resistant elastomeric liquid applied waterproofing & Heat reflective coating coating with PU Hybrid polymers & acrylic fibres, SmartCare DampProof Ultra or equivalent approved by GE. The coating shall resist 10 bars of water pressure as per DIN 1048 standards, with elongation of 350% as per ASTM D412 & crack bridging of upto 2.5mm conforming to ASNZ standard, The coating shall reduce the surface temperature of 10 degrees, etc., complete as per following :(a) Apply first coat Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers and reinforcing acrylic fibers with Sun Reflectivity Index (SRI) of 100-110, having minimum elongation of 350%, tensile strength 2.9 MPa and shall have crack bridging ability upto 2.5 mm and shall resist 10 bars of hydrostatic pressure reduce surface temperature upto 10 degree Celsius with 33°/o dilution as priming coat.(b) Laying of fiber mesh of 0.3mm thickness weave in leno pattern having weight 45 gm/Sqm and pasting it properly with overlap of 50mm and allow it to dry.(c) Apply second of undiluted coat@ 0.450Itr/sqm.(d) Apply Third and final coat undiluted @ 0.450 ltr/Sqm as directed by Engr-in-ChargeMake: - Bostik, Berger, Fosroc, Sika, Asian or any other make approved by E-in-C’s Branch for PU based water proofing treatment. |
| 29 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed |
| 30 | S&F for anodized aluminum snap grid frame work for false ceiling incl hangers 6mm dia, GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed |
| 31 | M&L for 4mm thick non asbestos fiber cement building design board of size 605x605mm fixed or laid to aluminum grid work with screws and including preparation of surface with two coat of oil bound distemper over a coat of chalk whiting primer complete all as specified and as directed |
| 32 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed |
| 33 | M&L for 10mm thick plaster in CM 1:6 on fair face of concrete surface or brick walls finished even and smooth without using extra cement complete all as specified |
| 34 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of average 2 mm thick wall care putty over a coat of primer to make the surface smooth complete all as specified and directed |
| 35 | M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of one coat of primer over a coat of average 2mm thick wall care putty to make the surface smooth after complete removal of existing treatment complete all as specified and directed |
| 36 | Cutting out existing cracks in concrete surfaces/masonry wall/slab forming grooves of 25mmx40mm size, cleaning the groove thoroughly with blower, applying primer coat of the mix of IPH CC or Hydroseal siliconate epoxy resin and hardner in equal proportion with spray gun suitable brush to form a film on the surface of groove, filling the groove with putty made by mixing IPH CC in equal proportion of make Harjas coating and polymers or hydroseal siliconate epoxy resin hardner and admixture in the proportion of 1:1:2 and finally applying the sealing coat of the same mix and in the manner primer coat is applied with following minimum coverage per running meter of groove :-Material : Priming coat putty filling seal coat, Resin 60gms 100gms 40gms, Hardner 60gms 100gms 40gms, Admixture 400gms |
| 37 | M&L for 15mm thick plaster in CM 1:4 on fair face of brick walls or concrete surface including mixing of water proofing compound, finished the surface even and smooth without using extra cement complete all as specified. (Note: Water proofing compound shall be measured and paid separately) |
| 38 | M&L for preparing newly plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed |
| 39 | M&L for complete removal of existing treatment on plastered wall surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed |
| 40 | M&L for 10mm thick plaster in CM 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement complete all as specified |
| 41 | M&L for preparation of newly plastered ceiling surface and applying two coats of oil bound distemper of approved tint over a coat of primer and applying average 2mm thick wall care putty complete all as specified and directed |
| 42 | M&L for complete removing of existing treatment on ceiling and applying two coats of oil bound distemper of approved tint over a coat of average 1mm thick wall care putty complete all as specified and directed |
| 43 | Taking down wooden chowkhats or frames area n. exc 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed |
| 44 | Taking down Chowkats exc 1.5 Sqm but n. exc 4 Sqm each with shutters (Without taking off shutters from the frame) complete all as specified and directed |
| 45 | S&F for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified |
| 46 | S&F of 32mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer/ bends to connect 20/25mm dia pipe as required complete all as specified |
| 47 | M&L for anodised aluminium window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays/ Imax hinges 01 No, hinges type B-21 100mm long 02 Nos suitable handle 01 No per shutter or as required etc complete all as specified Note : Glass, particle board, wire gauze will be measured and paid seperately as supply only |
| 48 | S&F 32mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified |
| 49 | M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions. |
| 50 | Supply only aluminium alloy wire cloth 0.45 mm nominal dia of wire and average with of aperture 1.40 m and fixed with aluminium wire staples all as specified and directed. |
| 51 | Hacking out old broken glass(any thickness, size, quality or description) from wooden frames /steel frame/aluminium frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads all as specified and directed . |
| 52 | S & F for 4 mm thick sheet glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 53 | S & F for 4 mm thick sheet figured glass ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 54 | S&F for 2nd class hard wood (SAL) plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed |
| 55 | M&L for second class hard wood 30 mm thick plain, framed, panelled door shutters (any number of pannels) with panels of timber on both side or veenerred particle board medium density wood particle boards with commercial face supplied and fitted to chowkats all as specified and directed |
| 56 | S&F factory made single extruded WPC (wood polymer composite) soild door/window/ceosetory windows and other frames/ chowkhat of size 65 x125mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non tixic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750Kg/Cum, screw withdrawl strength of 2200N (face) and 1100N (edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of class 'A' category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for separately)Note : for WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 57 | S&F factory made single extruded WPC (wood polymer composite) soild door/window/ceosetory windows and other frames/ chowkhat of size 65 x100mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non tixic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750Kg/Cum, screw withdrawl strength of 2200N (face) and 1100N (edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of class 'A' category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for separately)Note : for WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 58 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 59 | S&F 30mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified |
| 60 | M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified |
| 61 | M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described and applying one coat of synthetic enamel paints over 10cm width or girth complete all as specified and as directed |
| 62 | S&F factory made single extruded WPC (wood polymer composite) soild door/window/ceosetory windows and other frames/ chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non tixic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750Kg/Cum, screw withdrawl strength of 2200N (face) and 1100N (edge), minimum compressive strength of 58 N/Sqmm, modules of elasticity 900 N/Sqmm and resistance to spread of flame of class 'A' category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engr-in-Charge. (MS hold fast/lugs or SS dash fasteners shall be paid for separately)Note : for WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 63 | S&F Factory made single extruded WPC (Wood PolymerComposite) UV coated solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60.(Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm², modulus ofelasticity 850 N/mm² and resistance to spread of flameof Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunkS.S screws, in kitchen cupboards and room wardrobes shutter all as per direction of Engineer. Note : for WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made) |
| 64 | M&L for 100mm mortice lock, 4 lever brass body, vertical type complete all as specified |
| 65 | S&F 100mm stainless steel butt hinges complete all as specified |
| 66 | S&F 200mm stainless steel tower bolts complete all as specified |
| 67 | S&F 150mm stainless steel tower bolts complete all as specified |
| 68 | S&F 150mm stainless steel handles complete all as specified |
| 69 | S&F 300mm long stainless steel sliding door bolt with hasp and staple and fixing bolts complete all as specified |
| 70 | S&F door closer hydraulically regulated aluminium (die cast) body, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified |
| 71 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm overall length of cover plate |
| 72 | S&F in repairs Stainless steel chromium plated curtain rods including fancy type finials and end brackets for fixing curtain rods complete all as specified |
| 73 | M&L for 18mm thick HDF boarding (fire & water proof) as in cup boards exterior grade with one side white lamination and other side coloured prelaminated, size of the cabinet as per requirement of the site complete all as specified and as directed by Engr-in-Charge. Make : bajaj/ Axis/Greenply/ Amnchidply / or equivalent (Note : (i) Cutting edges of cupboard shutter/shelves to be finished with adhesive edge binding tape all as directed) |
| 74 | S&F mild steel chromium plated auto closing hinges 35mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified. |
| 75 | S&F stainless steel non megnetic bow handle \\"D\\" type 150mm long complete all as specified. |
| 76 | S&F double layer rotational moulded PVC water storage tank cylinderical, vertical with closed top hoisted and fixed in position tank capacity 1000 Ltr with and including PTMT float valve 20mm dia and making connection for inlet and outlet including taking down complete all as specified and directed |
| 77 | Taking up or down 15mm dia steel tubing and connections complete all as specified and as directed |
| 78 | Taking up or down 20mm dia steel tubing and connections complete all as specified and as directed |
| 79 | S&F 20mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified |
| 80 | S&F 25mm outer dia CPVC pipes SDR 13.5 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including suitable reducer for 15mm dia taps fitting as required complete all as specified |
| 81 | S&F 25mm bore gun matel globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified |
| 82 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed |
| 83 | S&F PVC (SWR) pipe 110mm bore, single socketed, in any length including bends, socket etc with rubber ring joints and jointed with approved adhesive and fixed to wall complete all as specified and directed |
| 84 | S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed |
| 85 | S&F PVC (SWR) 110mm dia bend of any radius and jointed with approved adhesive complete all as specified and directed |
| 86 | S&F PVC (SWR) 110mm dia junction single (single T) equal or unequal reducer 'T' 110mm to 75mm dia and jointed with approved adhesive complete all as specified and directed |
| 87 | S&F PVC (SWR) vent cowl 110mm dia jointed with approved adhesive complete all as specified and directed |
| 88 | S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to walls complete all as specified and directed |
| 89 | S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors complete all as specified and directed |
| 90 | S&F PVC (SWR) bend 75mm dia, any radius as required and jointed with approved adhesive complete all as specified and directed |
| 91 | S&F 75mm outlet dia PVC (SWR) multi floor trap with grating including jointing with solvent cement to waste pipe complete all as directed |
| 92 | Dismantling timber scantlings 40 sq. cm and over in section, in fillets, rails, posts, rafters, purlins, etc. in any position complete all as specified and directed |
| 93 | S&F for 2nd class hard wood 35 mm wrought treads with rounded nosings, with 20 mm wrought risers on tongued both edges, glued, wedged and blocked complete all as specified and directed |
| 94 | M & L for preparation of new/old wooden surfaces and applying melamine polish through the process of sanding with wood sanding paper of size 60 & 80 and applying wood filler mixed with NCD thinner including applying wood putty on shabby/ nailing area and sanding with sand paper of size 120 and applying sealer and walnut colour stainer and sanding with sand paper of size 320 and melamine polishing with spray application and again sanding with 400 sand paper and finally applying silicon of make Waxpol with soft fine cloth for better shining and finishing complete |
| 95 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick (above or below GL) complete all as specified and directed |
| 96 | M&L for providing Cement concrete 1:4:8 type D2 (using 40mm graded aggregate) as in sub base, foundations or mass concrete complete all as specified and as directed by the Engr-in-Charge |
| 97 | M&L for chequered cement concrete tiles of size 30cm X 30cm X 25mm thick with grey cement and pigments set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile as in floor over and including 20mm thick screed bed in CM 1:4 complete all as specified and directed |
| 98 | Taking down of damaged/ loosened cement concrete/cement mortar in RCC walls/soffits of slabs and similar structure members up to depth of 20mm to 40mm. Cleaning the dismantled portion with wire brush, etc to remove dust , dirt and other foreign particles and washing with water under pressure and applying bonding agent on old concrete surfaces all as per manufacturers instruction, Providing and applying two coats of rust preventive slurry made of \\"Polyalk Fixoprime\\" or equivalent in portion 1:1.5 to existing reinforcement bars over prepared surfaces provide and apply 20 mm thick High build polymer modified cement sand mortar ( 1:2.5 ) mixed with 10 liters (minimum) Nitobond SBR per 50 kilogram of cement of M/s FOSROC chemical ( India ) Pvt Ltd or Equivalent product of manufacturer all as manufacturers instruction including necessary scaffolding up to 12 m height complete and finally applying two coats of oil bound distemper with roller finish over a coat of chalk whiting primer over an avg 2mm thick of wall care putty all as specified and directed. Please Enable Macros to View BoQ information |
