|
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavating post holes or similar holes, each not exceeding 0.5 Cum, getting out in hard/dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering, and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed. |
| 3 | M&L for PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed. |
| 4 | M&L for hardcore with broken stone or boulder of gauge not exc 63 mm, deposited , spread and levelled in layers n. exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and as directed. |
| 5 | M&L for 75mm thick, PCC 1:2:4, type B2 (using 40mm graded crushed stone aggregate) as in sub base rough finish complete all as specified and as directed. |
| 6 | M&L for 25mm thick, PCC 1:2:4, type B0 (using 12.5mm graded crushed stone aggregate) as in floor complete all as specified and as directed. |
| 7 | M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound, Grade ‘A, complete all as specified and directed. |
| 8 | M & L for PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in surface channel or drain including necessary form work complete all as specified and as directed. |
| 9 | M&L for extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed. |
| 10 | M&L for brick work with sub class ‘B’ old size of bricks (locally available best quality) straight or curved on plan any radius, built in cement mortar 1:4 as in half brick thick works complete all as specified and as directed. |
| 11 | M&L for 15mm thick rendering in cement mortar (1:4), fair faces of brick or concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 12 | S&F rolled mild steel, Fe 410-W (Gde E-250) quality - A, joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), complete all as specified and directed. |
| 13 | S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracketframing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, Fe 410-W (Gde E-250) quality - A,., complete all as specified and directed. |
| 14 | S&F rolled mild steel, Fe 410-W (Gde E-250) quality - A, as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and directed. |
| 15 | S&F rolled mild steel, Fe 410-W (Gde E-250) quality - A,Plates(plain or chequered) channels,square cut or notched (ordinary and counter sunk) with riveted, bolted or welded attachment, complete all as specified and directed. |
| 16 | S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22cm and n.exc 30cm long and diameter of neck 16 to 20mm completed all as specified and as directed. |
| 17 | M&L Pre-painted hot dip aluminium Zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick ( Total coated thickness), any pattern corresponding to IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ 150 of an approved colour having yield strength of 550 Mpa as in roof covering/wall cladding, fixed with self tapping screws complete all as specified and directed. |
| 18 | S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour as approved by AGE(I) having tensile strength of 550 Mpa as in ridges,valley complete all as specified and as directed. |
| 19 | M & L for preparation of new steel surface over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 20 | Removing excavated material exc 250 m & nexc 500 m and depositing where directed at a level n.exc 1.5 m above the starting point etc complete all as specified and as directed. Please Enable Macros to View BoQ information |
