|
| 1 | Air Walker | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground withconcrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover.. |
| 2 | Shoulder Press Single | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover |
| 3 | Horse Rider | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments. The equipment shall befitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover |
| 4 | Surf Board | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. |
| 5 | Cycle | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. |
| 6 | Parallel bar | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground withconcrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. |
| 7 | Rowing | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and covernuts and bolts with base plate cover. |
| 8 | Cross Walker | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground withconcrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. |
| 9 | Abs Shaper Single | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and covernuts and bolts with base plate cover. |
| 10 | Bridge Ladder | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. |
| 11 | Arm Wheel 2 wheel | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp and burrs. All open ends of pipe to be closed with GI or LLDPE caps base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impactand injury. fixing the equipment on to it and cover nuts and bolts with base plate cover. |
| 12 | Leg Press Single | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impactand injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground withconcrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. |
| 13 | Leg Press Double | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impactand injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. |
| 14 | Horizontal Bar | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. |
| 15 | See Saw | Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nob Galvanized el or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and covernuts and bolts with base plate cover. |
| 16 | Leg Extension | Galvanized Carbon steel pipe and powder coated 80-100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. |
| 17 | Twister Single | Galvanized Carbon steel pipe and powder coated 80 to 100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI or LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipment. The equipment shall be fitted with in built limiters. fixing the equipment on to it and cover nuts and bolts with base plate cover. |
| 18 | Back Extension | Galvanized Carbon steel pipe and powder coated 80 to 100 micron thick using Akzo Nobel or equivalent. All welding joints of pipe shall be MIG welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. All open ends of pipe to be closed with GI/ LLDPE caps, base plate cover made of virgin LLDPE plastic by rotational molding High quality grip rubber should be used on handles. Foothold shall be made of nylon alloy with rounded edges to prevent impact and injury. Maintenance free bearings should be used in the equipments. The equipment shall be fitted with in-built limiters. The equipment shall be fixed on ground with concrete and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover. |
| 19 | Installation work | Installation work on site with all complete |
