|
| 1 | M&L, for Rendering 15 mm thick on brick or concrete surface with cement mortar 1:4 mixed with WPC as per manufacturers instructions, surfaces finished even and smooth without using extra cement complete including taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water all as specified and directed. ( Note :- WPC shall be paid separately if directed) |
| 2 | M&L, for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed. |
| 3 | M&L, for Brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius built in cement mortar (1:4) as in half brick wall, including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed. |
| 4 | M&L, for Rendering 15 mm thick on new brick or concrete surface with cement mortar 1:4 mixed with WPC as per manufacturers instructions, surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note :- WPC shall be paid separately if directed) |
| 5 | M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in coping, for fixing hold fasts etc, using necessary form work including demolition of existing old cement concrete of any description complete all as specified and directed. |
| 6 | Supply only liquid water proofing compound complete all as specified & directed. |
| 7 | M&L, for PCC 1: 3 : 6 type C-1 , (using 20 mm graded crushed aggregates) in surface channels and drains including necessary use & waste of formwork and demolition of existing old cement concrete of any description and rubbish off the premises, complete all as specified and directed. |
| 8 | Extra for forming fair finished drain or channel upto 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed. |
| 9 | M&L, for 75 mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete and rubbish off the premises, complete all as specified and directed. |
| 10 | M&L, for 18 to 20mm thick Dholpur stone slab in flooring or plinth protectin, laid over 20mm thick cement sand screed Cement mortar 1:6 as base, laid and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of Dholpur stone slab including rubbing and polishing and dismantling of existing stone slabs etc with cement mortar bedding and rubbish off the premises complete all as directed. |
| 11 | M&L, for Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) of premium quality of Gruop B 1 (a) polished, area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 12 | M&L, for Glazed ceramic coloured tiles of size 300mmx 450mm and 6-7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured tile grout to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 13 | M&L, Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:4 complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises all as directed. |
| 14 | M&L for 25mm thick plain cement concrete type B-0 1:2:4 (12.5mm graded aggregate) as levelling course in sub floors below tile etc complete |
| 15 | M&L, Machine cut kota stone slab flooring 18-20mm thick laid over 20mm thick cement sand screed CM 1:6 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing including dismantling of existing tiling and cement mortar bedding (but not backing) and rubbish off the premises complete all as directed. |
| 16 | M&L, for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete and rubbish off the premises, complete all as specified and directed |
| 17 | M&L, for Factory made machine pressed precast coloured cement concrete glossy finished Interlocking paver block any shape and size, 80 mm thickness, M-40 grade confirming to IS 15658-2006, complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. |
| 18 | Rubberised polished Glossy finish, chequered cement concrete coloured tiles 30 cm X 30cm X 25 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement & pigment to match the surface of tiles over & including 15 mm thick screed bed in CM 1:6 complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. |
| 19 | S&F, 18 to 20 mm thick marble work (any shade) as in flooring, steps, plateform, over RCC shelves and like, laid on 15mm thick screed in cement mortar 1:6 including pointing in colour cement 1:2 using marble dust with admixture of pigment to match with the shade of stone incl rounding of exposed edges of marble and demolition of old concrete /tile/stone flooring with screed bed complete all as specified and directed. |
| 20 | M&L for Repairs to door and window jambs in patches not exc 1.00 Sqm each patch witth glazed ceramic coloured tiles 6 to 7mm thick for matching size & shade to existing wall tiles, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including necessary rendering in cement mortar 1:4 finished including dismantling of existing damaged wall tiling duly cutting in proper shape,cleaning surfaces and rubbish off the premises, complete all as directed. |
| 21 | M&L for Repairs to tiled floor in patches including dismantling carefully and taken out cracked or broken non skid or vetrified tiles in floors or in cills, area not exc. 0.50 sqm ecah patch including material & lobour for non skid or vetrified ties of existing size and shade matching with existing floor tiles including 15mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry pointing with white cement with admixture of pigment to match with shade tiles, including removal of debris from site, complete all as specified and directed. |
| 22 | Dismantling carefully and taken out cracked or broken marble slabs in floors or in steps area not exc. 0.50 sqm ecah patch including material & lobour for prepolished marble slab 18-20mm thick of any colour (of any type) matching with existing colour of marble slab including 20mm thick screed bed in cement mortar (1:4) and jointed with grey cement slurry pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade marble, including moulding / rounding of exposed edge of slab & removal of debrish from site, complete all as directed. |
| 23 | M&L for cutting and grinding of existing terrazzo floor/ marble floor/ Kota stone/dhoplur stone floor surfaces ( 2 cut) on horizontal & vertical surface and finally finishing the surfacesto mirror finish uniformally by applying floor polish to entire satisfication of Engr-in-Charge, complete all as directed. |
| 24 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed. |
| 25 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed. |
| 26 | Taking down shutters of any description.exc 1 Sqm and n.exc 2 sqm each & refixing in same opening after replacement of unserviceable door frame or edging or any other repair of door shutter etc complete all as directed |
| 27 | Taking down only chowkhats or frame area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed. |
| 28 | Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified & directed |
| 29 | S&F, Second class hard wood (SAL) Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed |
| 30 | S&F, 35mm thick 2nd class H.W. plain framed panelled shutters (any number of panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face, size of rails and stiles as per IS 1003 (part-I) kiln seasoned and chemical pressure treated complete all as specified and directed |
| 31 | S&F, 35mm thick 2nd class H.W. glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc(with sash bars) divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed |
| 32 | S&F, in repairs, Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, galvanized wire of staples complete all as specified & directed |
| 33 | S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window& other frames/ chowkhats of size 50 x 75mm comprising of virginPVC polymer of K value 58-60(Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheathusk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headedSS screwshaving minimum frame density of 750 kg/cun, screwwithdrawn strength of 2200N (face)&1100N (edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with and including MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete all as per direction of Engineer-In-Charge. |
| 34 | S& F Factory made 30 mm thick single extruded WPC (Wood Polymer Composite) solid Moulded Flush Door Shutter Spray Painted with solvent based colour of required size with 2.4 or 6 rised panel design on front side with 10mm deep mould on single side with grain texture of comprising of virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately. |
| 35 | S& F, Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheets complete all as specified and directed. |
| 36 | S& F, Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC \\"C\\" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as directed |
| 37 | S&F, stainless steel Butt hinges 100mm long, ISI marked, fixed with SS screws, complete all as directed. |
| 38 | S&F, in repairs, stainless steel Butt hinges 75mm long, ISI marked, fixed with SS screws, complete all as directed. |
| 39 | S&F, 100mm size stainless steel handle of best quality as approved complete all as directed. |
| 40 | S&F, 150mm long stainless steel barrel tower bolt of best quality as approved complete all as directed. |
| 41 | S&F, 200mm long stainless steel barrel tower bolt of best quality as approved complete all as directed. |
| 42 | S&F, 250mm long stainless steel sliding door bolt 12mm dia with hasp & staple (bolt type) and fixing with SS nut and bolts complete all as directed. |
| 43 | S&F, Powder coated aluminium Anodized frame for doors , windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc complete complete all as directed |
| 44 | S&F Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) for window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 No.) complete all as specified and directed. |
| 45 | S&F, 5mm thick glass coloured/tinted/ground or obscured or frosted, on one side and glazed fixed in aluminium door, window, ventilator, partition etc, fixed with and inludind rubber gasket and aluminium beading complete all as directed. |
| 46 | S&F, Powder coated aluminium Anodized 100mm size handle for aluminium window and ventilator, fixed with screws all complete as directed. |
| 47 | S&F, Non anodised aluminium rectangular hollow sections for frame work of cup boards/ showcases, wall panelling grid, to be placed at suitable distances as per site requirementfixed with machine screws including rawel plugs, clamps etc, including taking down old unserviceable wooden filletsin frame, all as specified and directed. |
| 48 | M&L, 9mm thick plywood 5ply grade BWP, type BB, fixed with screws to aluminium frame work as in wall panelling including taking down damaged boards/ plywood with frame wall panelling including fillets complete all as specified & directed. |
| 49 | M&L 4mm thick, 3ply Veneered decorative plywood grade 1 (with BWR resin) with decorative face veeners on one face, fixed on plywood with best quality adhesive approved by GE, |
| 50 | M&L 2nd class hard wood fillets decorative, bullnosed, spalyed, chamfered or rounded on one edge or face sectional area not exc 3 Sqcm, fixed with nails, complete all as specified and directed. |
| 51 | S&F, in repairs, Solid PVC wall lining consisting of 5mm thick wood grains printed colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing in SSR including taking down damaged boards/ plywood and fillets, as directed. |
| 52 | S&F, in repairs, PVC fillets of width 35mm and 5mm thick PVC sheet for frame of wall panelling inclusive of fixing on wall to make PVC frame with screws as as per specifications and drawing in SSR all as directed. |
| 53 | S&F, 18mm thick colour prelaminated WPC board , minimum density 600 kg/cum, fixed to aluminium or timber frame work as in bath cabinet, cup board, show case, shelves, pelmet box and similar items including taking down damaged boards/ plywood fixed in repair complete all as directed. |
| 54 | S&F, Continuous (Piano) hinges, mild steel, bright finished or electro galvanised, width of flap 30mm (when open), complete all as directed |
| 55 | S&F in repair stainless steel bow handle 75mm size with machine screw fixed in cup boards drawers etc all as directed. |
| 56 | S&F, Magnetic catcher suitable for cup board shutter fixed with scews in bath cabinet or similar situations, complete all as specified and directed |
| 57 | S&F, Edge beeding tape 0.50mm thick with suitable width of exposed edges of WPC boards or similar works, all as specified and directed. |
| 58 | S&F, Looking mirror 5.50mm thick area 0.50 Sqm to 1.00 Sqm bevelled edge of selected quality glass mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers and surrounded with aluminium angle including taking down existing unserviceable mirror from frame complete all as directed. |
| 59 | S&F, in repairs, Looking mirror 5.0mm thick area not exc. 0.60 Sqm, bevelled edge of selected quality glass, fixed to cup boards with chromium plated brass screw and cup washers or fixed in steel cupboard with packing of 6 mm plywood including taking down existing unserviceable mirror, complete all as specified and directed. |
| 60 | Repairs to Aluminium windows for smooth functions including replacement of hinges, edging etc , taking down existing shutter not exc 1.50 Sqm and refixing in the same position after all other repair complete all as specified and directed. |
| 61 | Supply & fix , 3.00mm thick sheet glass plain or pinheaded/ frosted of any type & glazing with wooden beads or with oil putty, in squares not exc 0.5 Sqm in each pane, including hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc, all complete as directed. |
| 62 | Repairs to Aluminium door for replacement of pivot for glazed aluminium door as per sample including taking down existing glazed aluminium door shutter/frame less glass door shutter n. exc 4.00 Sqm and refixing in the same position after fixing of pivot and all other repair complete all as specified and directed. |
| 63 | S&F, Stainless steel curtain rod 20mm inner dia of SS heavy duty conduit pipe grade -302 , complete. Including taking down of existing rod, complete all as specified and directed. |
| 64 | S&F, Stainless steel decorative finials and end wall bracket of approved quality for 20mm dia curtain rod , complete. Including taking down of existing finals or end brackets, complete all as specified and directed. |
| 65 | S&F, Stainless steel heady duty supporting brackets of approved quality for 20 to 25mm dia curtain rod , complete. Including taking down of existing brackets, complete all as specified and directed. |
| 66 | S&F in repair 4 lever mild steel lock with handle & plate suitable for existing steel cup board complete all as specified & directed. |
| 67 | S&F, in repair, heavy duty double action floor spring hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel, complete all as specified & directed. |
| 68 | S&F, 12mm thick toughened glass frameless doors including cutting, polishing and bevelling all around and making holes for fixing of handles including removing old broken glass doors complete all as directed |
| 69 | S&F, 300 mm long stainless steel handle fixed to glass door all as specified & directed. |
| 70 | S&F in repair stainless steel hanging rod 20mm dia for cup boards heavy duty, of suitable size with end brackets , complete all as directed. |
| 71 | Supply & fixed in repair, stainless steel sheet 0.80mm thick , gde 304, fixed with stainless screws with washer in wall or ceiling upto 5mtr height for crumple joints including taking down existing old damaged mild steel sheet complete all as specified & directed. |
| 72 | Repairs to drawers of existing cup board of any type to make smooth functional including edging or straightening the edges & sides to achieve desired shape and supply & fixing of a pair of heavy duty stainless steel telescopic channel of 450 to 500 mm long size and refixing the drawer in original position complete all as directed. |
| 73 | S&F, in repairs, Factory made Cupboard of 18-20mm thick with coloured prelaminated WPC board consisting of one drawer,two shoe racks with stainless steel louvers of 100X100mm size on both shutters, three shelves and one drawer withlocks and a pair of stainless steel chanel 450mm, handles, 20mm dia heav duty SS cloth hanging rod including end brackets, fixing with 100mm long fasteners (12 Nos Minimum), one looking mirror 5mm thick of size 400mm X 1100mm fixed on surace of singlre leaf shutter of cupboard with WPC beading & PVC angle / edge bend tap of suitable size & matching colour, make good the existing surfaces with cement mortar (1:4) to get the size of cubical portion for cupboard of specified size etc all complete as per specifications and drawing No. GE IMA/ 156/ 2022, Sheet No. 1/1, Back side of cupboard shall be provided with 12mm thick WPC board including taking down old unserviceable wooden cupboards of any description, all as specified and directed. Make:- Rajshree Plastiwood or equivalent in Floresta of TVL Engineers Pvt. Ltd. or Navratan or Archid Ply. As approved by GE. Note :- (1). Over all size of cup board Width- 1.75mtr , Height- 1.93Mtr, Depth- 0.60Mtr and these dimensions may vary 50mm Plus or Minus as per site requirement due existing constructional aspects. (2). All sizes of shelves, drawers, shoe racks etc may varry as per site requirement except a maximum variation of 50mm in over all size only. (3) Stainless steel Chanel for drawer shall be of capacity to sustain 25 Kg weight. Make :- Hettich or as approved by GE. (4). All fittings like Handles of diffirent sizes , Piano hinged 36mm wide on opening, heavy duty 22mm dia hanger rod with brackets shall beof stainless steel. (5). Any missing specifications or dimensions shall be as per site requirement and as per final direction of Engr-in-Charge will be applicable. |
| 74 | S&F, Floor door stopper of aluminium alloy body and tongue, anodised, with hard rubber bush fixed in repair in door, complete all as specified and directed |
| 75 | Supplying and laying of CPVC pipes 20mm dia bore, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down existing tubing pipeof any description, complete all as directed. |
| 76 | Supply and Fixing, Brass thread Elbow for CPVC pipes 20mm dia complete all as specified & directed. |
| 77 | Supply and Fixing, Brass Thread Tee, Male/ Female Brass Threaded Adaptor, for CPVC pipes 20mm dia, complete all as specified & directed. |
| 78 | S&F, in repairs, 15mm bore dia medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed. |
| 79 | S&F, in repairs, 20mm bore dia medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed. |
| 80 | Supply & fixed, in repair, Chromium plated Angle valve 15mm dia (angle cock) cast complete all as directed. Make: Cera (Victor Series) and equvalent in Jaquar, Hindware, Kerovit etc |
| 81 | Supply & fixed, in repair, 15mm bore short body bib tap chromium plated with wall flange and aerator complete all as specified and directed. Make- Cera (Victor Series) and equvalent in Jaquar, Hindware, Kerovit etc |
| 82 | Supply & fixed, in repair, Chromium plated brass hot & cold basin mixer with centre hole for WHB and long shank fancy type 15mm bore fixed in repair complete all as directed. Make: Cera (Fountain Series-F2013461) and equvalent in Jaquar ( Florentine Series -FLR 5167NB), Kerovit ( Nucleus - KB 111025) as approved by GE. |
| 83 | Supply & fixed, in repair, Chromium plated Wall Mixer with Bend Pipe for connection to Overhead Shower (with Bush & Piston Diverter Fitting) with Aerator, connecting legs & wall flange etc 15mm bore fixed in repair complete all as directed. Make - Cera (Victor Series) and equvalent in Jaquar, Hindware, Kerovit etc |
| 84 | Supply & fixed, in repair, PVC connections 15mm size with brass/ PVC nut both side of length 450mm complete all as directed. |
| 85 | Supply & fixed, in repair, PVC connections 15mm size with brass/ PVC nut both side of length 600mm complete all as directed. |
| 86 | S&F, in repair, 15mm bore stainless steel jet spray with 1.00meter PVC flexible tube fixed, complete all as directed. |
| 87 | S&F, in repairs, CP Health Faucet with 1 M. long flexible tube chrome braided with wall hook Make- Cera cat part No. F 8030111AB or Jaquar Cat No. ALD 587, Kajaria Kerovit CAT No. KA580020 |
| 88 | Supply & fixed, in repair, Two way chromium plated angle cock 15mm dia with wall flange fixed in repair complete all as directed Make: Cera ( Vivana SeriesF2014211) and equvalent in Jaquar, Hindware, Kerovit etc |
| 89 | Supply & fixed, in repair, Overhead shower round shape 100mm dia single flow (ABS body chrome plated with grey face plate) with revolving joints (with body rotation) & 115 mm long shower arm fixed in repair complete all as directed. Make: ESSCO (Jaquar) Cat No. EOS-542N or Cera cat No. F7010213AB Or Hindware Cat No.F160034. |
| 90 | S&F, in repairs, Chromium plated towel rail 600mm size fixed in repair complete all as directed.Make: Cera Meridian (SS 304) Cat No. F5015103C4, Jaquar Continental Cat No. ACN 1111SM, Kajaria Kerovit Cat No. KA 930001 |
| 91 | S&F, in repairs, Chromium Plated steel soap dish fixed in repair complete all as directed Make: Cera Meridian ( SS 304) Cat No. F5015160C, Jaquar Continental Cat No. ACN 1131N, Kajaria Kerovit Cat No. KA 930003 |
| 92 | S&F, in repairs, Chromium Plated steel toilet paper holder fixed in repair complete all as directed. Make: Cera Meridian(SS 304) Cat No. F5015110C4,Jaquar Continental Cat No. ACN 1153S, Kajaria Kerovit Cat No. KA 980009 |
| 93 | S&F, in repair, 100mm dia chromium plated grating with/without hole fixed in repair complete all as directed. |
| 94 | S&F, in repair, Vitreous china WHB Star white oval type counter top WHB 63 x 50 cm fixed in repair complete all as directed. Make : Hindware Cat. No.: 10017 or equivalent in Cera, Parryware. |
| 95 | S&F, in repair, Vitreous china WHB Star white flat back type size 580 x 450 mm including brackets complete all as directed. |
| 96 | S&F, in repair 15mm dia pillar cock with swan neck spout and aerator, screwed for iron pipe and complete all as directed. Make- Cera cat part No. F2008105, or Jaquar SHFLR5011N New or Hindware Flora code F280012. |
| 97 | S&F in repair vitreous china wash down water closet pan (padestal pattern), white including plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device. |
| 98 | S&F, in repair, PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as directed. |
| 99 | S&F, plastic water closet seat cover, white, closed pattern flat bottom and mild steel chromium plated or aluminised hinging device, fixed in repair, complete all as directed. |
| 100 | Supply & Fix, in repairs, Brass spindle of any type or size suitable for existing bib cock, angle cock, wall mixture, WHB mixture etc for refixing old fittings , complete all as directed. |
| 101 | Supply & Fix, in repairs, Chromium plated brass knob for wash hand basin, wall mixture, bib cock and angle cock as per site requirement with nut & washer as approved for refixing old fittings, complete all as directed. |
| 102 | S&F, 20mm bore gun metal globe/gate valves, with iron wheel head, screwed both ends for iron/GI pipe fixed in repair complete all as directed. |
| 103 | S&F for 75mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, including dismantling of existing cast iron or reinforced concrete drain pipes, complete all as specified and directed |
| 104 | S&F, in repair, for Cast iron 75mm diameter of outlet floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) complete all as specified and directed |
| 105 | S&F, in repair, for cast iron fittings as bends, Tee etc (any radius) 75mm pipe, diminishing pieces of tapers (large bore measured) complete all as specified and directed. |
| 106 | M&L for Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes upto 750 ltr capacity including washing with bleaching powder etc complete all as directed. |
| 107 | M&L for Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, exc. 750 ltr but n.exc 2000 ltr capacity including washing with bleaching powder etc complete all as directed. |
| 108 | S&F, in repair, 500 ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed. |
| 109 | M&L for 1000 ltr capacity Rotational moulded polythylene water storage tanks three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I including dismantling/ taking out of old water tank & removing to where directed complete all as specified and as directed. |
| 110 | S&F, Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as directed. |
| 111 | M&L, PVC lid for PVC water tank of capacity upto 2000 ltr with hinging device and locking arrangement with necessary nuts, bolts and washer etc fixed in repair complete all as directed. |
| 112 | M& L for post anti termite treatment along the external wall below concrete or masonry apron, sides of drainage pipes, manholes, conduits, similar possible entry/ approach of termite in apron , using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes at every 150mm centre to centre or part thereof etc.complete all as specified and directed. |
| 113 | M& L for post anti termite treatment along the joint of internal wall and floor in rooms, toilets, balcony etc below tiled or concrete floor, using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes at every 150mm distance or part thereof in floors/ skirting, complete all as specified and directed. |
| 114 | Complete removing of existing treatment from wall / ceilling by scrapping with mechanical means, complete all as specified and directed. |
| 115 | M&L, for two coats of cementious resin based 2K water proof coating at a interval of minimun 8 hors @ 0.80 kg per Sqm for each coat on brick wall or concrete surfaces including cleaning, washing with clean water, making wet dust free surfaces before applying the water proof coating and sanding with coarse washed dry sand over the wet second coat of 2K, to make the surfaces rough to receive the wall plastering, all complete as specified and directed by Engr-in-Charge. |
| 116 | Preparation of plastered or scrapped or water proofing coated surface of wall or ceiling and applying 1.5mm thick damp proof wall care putty as per manufacturer instruction complete all as specified and directed. |
| 117 | Preparation of puttyied / new plastered surfaces of wall or ceiling and applying two coats of Oil bound distemper over one coat of primer complete all as specified and directed. |
| 118 | M&L for Preparation of newly plastered surfaces and applying two coats of Weather proof coat of exterior emulsion paint over one coat of exterior primer complete all as specified and directed. Note :-work to be carried out upto a height of triple storied bldg . |
| 119 | M&L for Preparation of new plastered surfaces of wall and applying two coats of cement base paint, complete all as directed |
| 120 | M&L for Preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as directed. |
| 121 | M&L for preparation of new or previously untreated wooden surfaces over 10 cm width or girth including rubbing with sand paper of different sizes, filler coat, including filling thinner with fine cloth and spirit lak dana polishing two or more coats up to desired finishing as directed by GE. |
| 122 | M&L for Preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed |
| 123 | M&L for Preparation of old painted wooden surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed |
| 124 | M&L for Preparing old treated varnished wooden surfaces of any description over 10 Cm width or girth and applying one or more coats of synthetic varnish to the desired finish all complete as specified and directed. |
| 125 | M&L for Preparation of old plastered/un-plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices etc and applying one coat of white wash on ceiling complete all as specified and directed. Note : Work to be carried out upto height of triple storied buildings. |
| 126 | M&L for Preparation of old plastered/un-plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices etc and applying one coat of oil emulsion distemper on ceiling complete all as specified and directed. |
| 127 | M&L for Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls with roller or mechanical means as directed by Engr-in-Charge, complete all as specified. Note : Work to be carried out upto height of triple storied buildings. |
| 128 | M&L for Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of weather proof coat of exterior emulsion paint on walls with roller or mechanical means as directed by Engr-in-Charge, complete all as specified. Note : Work will be carried out upto height of triple storied buildings. |
| 129 | M&L for Preparation of previously treated old cement concrete interlocking paver block/chequered tile floor, dholpur stone flooring and similar flat concrete area on path, plinth protections, pedestal, hardstanding by brooming down or steel wire brushing, scrapping, removing grass roots in joints of paver block and cleaning all loose dirt & dust from the surface by fanning with air compressor and applying one coat of anti fungal apex paint of Asian paint or equivalent in berger, Nerolac paint as per original colour and pattern of tile, complete all as specified & directed. Please Enable Macros to View BoQ information |
