|
| 1 | Material and labour for applying One coat of oil bound distemper using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to areas and penetration of distemper on the surface complete all as specified and directed.Note –Sanding of surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application. |
| 2 | M&L for preparation of wall surface incl for One coat water based premium acrylic smooth exterior emulsion i.e. Weathercoat Long Life 10 (of approved colour) with PU & silicon additives, excellent dirt pick up resistance with low VOC less than 50 gram/litre as per the LEEDS specifications, Anti Algai properties in two coats @1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat of HS Seal-o-prime with Berger Pro (or equivalent) spray 3.21 fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. |
| 3 | M & L for preparation of old decorated plastered surfaces of walls & applying one coat of white wash, complete all as specified & as directed. |
| 4 | M & L for preparation of old decorated plastered surfaces of ceiling & applying one coat of white wash, complete all as specified & as directed. |
| 5 | M&L for Preparation old decorated plastered surfaces of wall and applying one coat of cement base paint,using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS as in wall and complete all as specified and as directed. |
| 6 | M&L for Preparation old decorated plastered surfaces of wall and applying two coat of cement base paint,using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS as in wall and complete all as specified and as directed |
| 7 | M & L complete removal of existing treatment surface of walls and preparation of wall and applying 1 mm thick acrylic wall care putty and applying two coats of oil bound distemper over a coat of alkali resistance priming paint complete all as specified and directed. |
| 8 | M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 9 | M&L for preparation of old painted iron/steel surface , CGI/PGI steel roof sheets, over 10cm in with or girth and applying one coat of synthetic enamel roof paint complete all as specified and directed. |
| 10 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. |
| 11 | M & L for 5mm thick rendering in cement mortar (1:3), as in ceiling finished even & Smooth w/o using extra cement, complete all as specified and directed. |
| 12 | M&L for preparation of newly plastered surfaces of ceilings and apply three coats of white wash, complete all as specified and directed. |
| 13 | Material and labour for 15mm thick rendering in cement mortar (1:6) on surface of any description of brick or concrete and finished the surface even and smooth without using extra cement complete all as specified and directed |
| 14 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification over and including one coat of primer over newly plastered surfaces and 1mm thick acrylic wall care putty(POP) complete all as specified. |
| 15 | M&L for 15 mm thick rendering in CM 1:4 with and incl water proofing compound @2% by weight of cement including finishing the surface even and smooth without using extra cement, complete all as specified and directed (WPC shall be measured and paid seperately) |
| 16 | M&L for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer on new plastered surfaces complete all as specified and directed. |
| 17 | Supply only Integral water waterproofing compound |
| 18 | M & L two coats of hydrolock paint for arresting dampness/salt leaking/ leakage and seepage in wall incl preparation of surfacesand as per manufacutrer instruction complete all as specified and directed. |
| 19 | M & L two component cementation waterproof coating (Latex shield 2k) for arresting leakage from roof /wall including preparation of surfaces as per manufacturer instruction complete all as specified and directed. |
| 20 | M & L two coats of Aliphatic two components paint suitable for concrete and plaster surfaces, especially in exterior application incl preparation of surfaces and as per manufacutrer instruction complete all as specified and directed make STP or equalent. Please Enable Macros to View BoQ information |
