|
| 1 | A. GROUND FLOORA-1) Supplying all materials, labour, T&P for earth work in excavation in foundation in all kinds of soil with in 50m initial lead and1.50m initial lift including rough dressing and breaking clods to maximum5cm to 7cm in size and laying in layers not exceeding 0.30min depth and as per the direction of EIC. |
| 2 | A-2) Supplying all materials, labour, T&P for filling foundation and plinth with excavated earth(in all kinds of soil) well watered and rammed including cost, cost of all labour, carriage, royalty, taxes, T&P etc complete. |
| 3 | A-3) Supplying all materials, labour, T&P and providing Cement Concrete (1:3:6) using 40mm size hard granite C.B. metal approved quality from approved quarry including hoisting laying using concrete mixture and vibrators including cost, carriage, royalty, cost of all labour T.&P. etc complete and as directed by E.I.C. |
| 4 | A-4) Supplying all materials, labour, T&P and providing Smooth Centering and shuttering for RCC work including cost carriage royalty of all materials and dismentalling them after casting etc all complete as directed by E.I.C.A) Footing & Plinth Beam |
| 5 | A-4 B) Column & Beam (Ground Floor) |
| 6 | A-4 C ) Column & Beam (1st Floor) |
| 7 | A-4 D) Lintel |
| 8 | A-4 E ) Roof Slab & Chajja (Ground Floor) |
| 9 | A-4 F ) Roof Slab & Chajja (1st Floor) |
| 10 | A-4 G ) Staircase |
| 11 | A-5) Supplying all materials labour T&P and providing R.C.C. M-25 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, T&P centering shuttering etc complete but excluding cost of reinforcement complete.a) Column Footing |
| 12 | A-5.-b) Plinth Beam |
| 13 | A-5.-c) Lintel |
| 14 | A-5.-d) Column and Roof beam |
| 15 | A-5.-e) Roof Slab & Chajja |
| 16 | A-5.-f) Stairs |
| 17 | A-5.-g) Head Room (1st Floor) |
| 18 | A-6) Supplying all materials,labour,T&P for MS reinforcement for RCC work including cutting , bending, binding and tying the grills and placing in position including cost of binding wire 18-20 guage as per specification etc all complete as per direction of E.I.C. |
| 19 | A-7) Supplying all materials labour T&P and providing Brick work with Fly Ash bricks of 25cm x 12cm x 8cm size in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 20 | A-8) Supplying all materials labour T&P and providing Brick work with Fly Ash bricks of 25cm x 12cm x 8cm size in cement mortar (1:6) in superstructure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C.a) Ground Floor |
| 21 | A-8 b) First Floor |
| 22 | A-9 ) Supplying all materials, labour, T&P and providing 2.5cm thick base concrete with C.C.(1: 2:4) with 12mm size HG chips for tile flooring including cost carriage royalty of all materials etc all complete. |
| 23 | A-10) Supplying all materials, labour, T&P and providing 6 mm thick cement plaster (1:4) to RCC surface finished smooth including close chiping and slury treatment including cost, carriage and royalty of all the materials etc all comlete as per the direction of EIC. |
| 24 | A-11) Supplying all materials labour T&P and providing 16mm thick cement plaster (1:6) over brick masonary to the inside rough surface including cost carriage and royality of all materials etc all comlete as per the direction of EIC. |
| 25 | A-12) Supplying all materials labour T&P and providing 12mm thick cement plaster (1:6) over brick masonary to the outside smooth surface including cost carriage and royality of all materials etc all comlete as per the direction of EIC. |
| 26 | A-13) Supplying all materials, labour, T&P for fitting and fixing of vitrified tile (Plain) in floors of size 600mm x 600mm of approved make conformaing to IS : 13755 laid on 20 mm thick cement mortar (1:4) (1 cement :4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of E.I.C. |
| 27 | A-14) Supplying all materials, labour, T&P for fitting and Fixing Ceramic wall tiles on wall of size 300mm x 200mm on 12 mm thick cement mortar (1:3) jonted with neat cement slury mixed with pigment to match the shade of the tiles including rubbing & pulishing including cost of tiles etc.complete as per direction of E.I.C. |
| 28 | A-15 ) Supplying all materials labour T&P and providing 2.5cm thick grading concrete (1:2:2) on roof slab with 6mm size hard crusher broken granite chips on new work including watering curing cost of all materials, water-proofing compounds, T.& P. required for the works etc complete. |
| 29 | A-16) Supplying all materials, labour T&P and finishing surface of walls with Cement based wall putty & making smooth to recive painting including cost of scaffolding etc. with cost of all materials, labour T&P etc. complete. |
| 30 | A-17) Supplying all materials, labour T&P and providing Plastic Paint two coats to walls of approved shade on new work over a coat of any approved (water bound) primer including labour charges, cost of materials etc. Complete |
| 31 | A-23) Supplying all materials, labour T&P and finishing to the exposed surfaces of wall with weather coat of any approved shade on new work 2 coats to give an even shade including cost of weather coat all cost of all labours and T&P etc. complete . |
| 32 | A-24) Supplying, fitting, fixing aluminium door with anodized aluminium door section of 9202 as vertical member, 9201 as top member & 9200 as bottom & middle member with frame section no 9221 and tapper clip no 4660 and the frame to be completed by means of joining angle No 1855 and window (sliding type) made up aluminum Section 151-154,151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge. |
| 33 | A-25) Supplying all materials labour T&P and fitting and fixing of G.I. fabricated,welded window grill made up of 10mm size Square bar painted with two coats red oxide paint all complete. |
| 34 | A-26) Supplying all materials, labour T&P and painting two coats of enamel paint over a coat of primer to wood/iron work of any approved shade incluiding all taxes and cost of all materials and cost of all labour with T&P required for the work complete. |
| 35 | A-27) Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect. (in all floor) |
| 36 | A-28) Supplying all materials, labour T&P andproviding and laying heavy duty factory made hydraulically pressed and mechanically compacted pre cast inter locking tuff stone brand pavers of 80mm thick coral shaped preparation of subbase with 50mm sand and levelling and laying of interlocking paver biock with sand binding and final compacting with plate vibrator finishing the surface including cutting of biocking at the edges with all lobour ,material,sundries,T&P required . |
| 37 | B. WATER SUPPLY & SANITARY INSTALLATION WORKB-1) Supplying ,fitting & fixing of Orissa pan ,100mm.dia. PVC,P-trap & jointing materials etc all complete as per the direction of Engineer-in-charge. |
| 38 | B-2) Supplying ,fitting & fixing of S-tarp commode with matching seat cover & jointing materials etc all complete as per the direction of Engineer-in-charge. |
| 39 | B-3) Supplying all materials, labour, T&P and cutting grooves in pucca floor or Brick wall and mending good the damages for taking G.I. pipes complete as per P.H. specification. |
| 40 | B-4) Providing and fixing to wall, ceiling and floor the pipe fittings of following nominal bore with clamps; including making good the wall ceiling and floor, all complete in ground floor (including the cost of materials ) as per the PHE specification and direction of the Engineer-in-charge. a) 25mm dia C.P.V.C. pipe (SDR-13.5) |
| 41 | B-4-b) 25mm dia UPVC-ASTM Standard (Sch-80) |
| 42 | B-4-c) 40mm dia UPVC-ASTM Standard (Sch-80) |
| 43 | B-5) Providing, fixing, fitting of following Brass / Gun metal/Chromium plated fitting of approved make (conforming to respective I.S. specifications ) including the jointing materials, if any all complete as per the PHE specification and the direction of the Engineer-in-charge. (Plaza/Amber/Delux). Gents Toilet & Ladies Toileta) 20mm dia C.P. concealed stop cock |
| 44 | B-5-b)125mm dia C.P. grating |
| 45 | B-5-c) C.P. soap disc. |
| 46 | B-5-d) 15mm dia C.P. long body Bib cock |
| 47 | B-5-e) 15mm dia C.P. Short body Bib cock |
| 48 | B-5-f) 600mm x 20mm C.P. Towel rail |
| 49 | B-5-g) C.P. Towel ring |
| 50 | B-5-h) 500mm x 125mm C.P. glass shelf with glass |
| 51 | B-5-i) 15mm dia c.p.angular stop cock |
| 52 | B-5-j) 15mm dia c.p. pillar cock |
| 53 | B-5-k) 15mmx600mm PVC connection pipe |
| 54 | B-5-l) C.P. waste. (32mm -5\\" long) |
| 55 | B-5-m) 32mmx800mm long PVC waste pipe |
| 56 | B-5-n) Frammed Mirrior |
| 57 | B-5-o) C.P. extension piece-2\\" (15mm x2\\") |
| 58 | B-5-p) C.P. flange(Big) |
| 59 | B-5-q) 15 mm CP 2 in 1 Bib cock |
| 60 | B-5-r) CP Health Foucet with 1.0 mtr PVC Tube |
| 61 | B-5-s) 15mm dia C.P Sink Cock |
| 62 | B-5-t) 25mm x 15mm dia Brass Elbow |
| 63 | B-5-u) 25mm x 25mm x 15mm dia UPVC Brass MTA |
| 64 | B-5-v) 25mm x 15mm dia Brass MTA |
| 65 | B-5-w) 25mm UPVC-ASTM Ball Valve |
| 66 | B-5-x) 40mm UPVC-ASTM Ball Valve |
| 67 | B-5-y) 25mm dia PVC Ball Cock |
| 68 | B-6) Supplying all materials,labour and T&P for fixing 10 ltr capacity PVC low level cistern with a pair of PVC brackets complete with fitting such as siphonic arrangement,15mm. nominal size brass/PVC ball valve with polythene float chromium plated brass handle, unions and couplings for connection with inlet, outlet and over flow pipes, 32mm.dia. PVC long flush bend including cutting holes and making good the same and connecting the flush bend with cistern and closet and the inlet pipe with supply main etc. all complete as per specification. |
| 69 | B-7) Supplying all materials,labour and T&P for fixing wash basins with pedestal by making hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. |
| 70 | B-8) Supplying all materials,labour and T&P for Fixing wash kitchen sink conforming to IS 2556 : Part 5-1994 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.a) 24\\"x 18\\" x10\\"STEEL sink single bowl (Mousumi ) |
| 71 | B-9) RCC beam staging with required brick work, Cement plaster & Roof slab suitable for installation of 1000 ltr. capacity PVC Tank including cost of materials, with all taxes, royalties, transportation, hoisting, and pipe connection to the tanks and its testing, on the ground floor with labours, T&P etc. all complete as per the direction of Engineer-in-charge. (2ndFloor) a) 1000 Ltr capacity PVC Tank- |
| 72 | B-10) Supply all materials Labour & T&P and fitting & fixing of 1000 ltrs capacity P V C tank including cost of transportation, hoisting, and pipe connection to the tanks and its testing,on the Ground floor with all materials, labours, T&P etc. all complete as per the direction of Engineer-in-charge. (Including cost of 1000 litre capacity PVC Tank (Sintex make ISI - white) with cover as per ISI specification)a) Installation of PVC tank 1000 Lt -Three layer white IS-12701-1996 (1000 Ltr capacity PVC Sintex Tank Tripple layer (White) |
| 73 | B-11) Supply all materials Labour & T&P for Hoisting of PVC Sintex Tank carefully and placing in position by the help of scaffolding with connection of loading & delivery line and all required fittings such as socket, union, jam nut etc, all complete. |
| 74 | B-12) Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.50mtr. Deep soak-way pit with dry brick walling up to 1.10mtr. height and brick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab,50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. |
| 75 | B-13) Supplying all materials labour & T&P for Construction of brick masonry Inspection chambers including cleaning of existing choked and damaged Inspection through sweepers dismantling and removal of old and damaged brick masonry work completely giving temporary chokes and when necessary till completion earth work in excavation in all kinds of soil, flyash brick work in C.M. (1:5) with flyash bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punning including cost of 150 mm thick R.C.C. slab in C.C. (1:2:4) in 12mm C.B.H.G. chips having manhole opening of requisite including fixing of SFRC manhole cover midum duty with frame including curing etc. all complete as per direction of Engineer-in-charge(750mm x 750mm x 750mm deep) |
| 76 | B-14) Supplying all materials, labour T&P for laying of SWR PVC sewer lines with all round concrete of 1:4:8 with 0.3 mtr dia encasing including earth work excavation in all kinds of soil and refilling the trenches etc all complete inclusive of cost of SWR PVC pipe etc all complete as per the direction of Engineer-in-charge. (Astral/Ashirvad/Supreme)a) 110mm dia PVC SWR Pipe (Standard Beddings for C-2 Sewer) |
| 77 | B-15) Supplying all labour T&P materials for fitting and fixing of following dia PVC SWR pipe and fittings etc. all complete as per the P.H. spectification including cost of pipe and fittings. a) 110mm dia P.V.C. SWR S/S Pipe (ISI type-A) |
| 78 | B-15-b) 110mm dia PVC SWR P-trap . |
| 79 | B-15-c) 110mm dia PVC SWR Plain bend . |
| 80 | B-15-d) 110mm dia PVC SWR Door bend . |
| 81 | B-15-e) 110 x 110 x 110mm dia PVC SWR Tee |
| 82 | B-15-f) 110 mm dia P.V.C. SWR Cowl |
| 83 | B-15-g) 110mm dia P.V.C. SWR S/J with door |
| 84 | B-15-h) 110mm diaP.V.C. SWR.pipe clip |
| 85 | C. INTERNAL ELECTRIFICATION WORKC-1) Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC flexible conduit with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/Great White/HPL) |
| 86 | C-2) Supply and fixing of 6Amp plug with 6Amp switch on existing board (Modular type) a)Plug Point |
| 87 | C-3) Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (make-Anchor/ Legrand /Roma/Great White/HPL) a) 15 Amp. Plug point |
| 88 | C-4) Supply and drawing of following size PVC insulated single core multistrand copper conductor in existing surface/recessed/STEEL / conduit as required.(a) 2 X 4sqmm Sch. Sl. No. 64 (e). |
| 89 | C-4-b) 2 X 2.5sqmm +1 x 1.5sqmm for inverter and sub main line of Sch. Sl. No. 64 (g). |
| 90 | C-4-c) 2 X 6mm2 power supply line for Meter Board Sch. Sl. No. 64 (e). |
| 91 | C-5) Supply and fixing of Modular metal box of following size (nominal size) on surface/Recess with suitable size of Modular cover in front including cutting the wall and making good the same in cases of recessed conduit as required (Modular box + cover+ fixing + Labour cess) (Sch. Sl. No.56)a) 2 Modular Board |
| 92 | C-5-b) 3 Modular Board |
| 93 | C-5-c) 4 Modular Board |
| 94 | C-5-d) 8 Modular Board |
| 95 | C-6) Supply ,installation, testing and commissioning of main switches (IS 13940 part-3/1993 ) of following capacity on existing surface/wall mounting and completer with HRC fuse links, interconnections, earthing (Make-Seimens/ HPL/ Anchor/ L&T/Havells/C&S/RK)a) 63Amp ICDP main switches with MS board (Sh Sl No. 13 (b)) |
| 96 | C-7) Supplying and fixing of 15W circular LED TL fitting (Make-Havells /Philips/Bajaj) . Sch. Sl. No. 70.a) 15W circular LED TL fitting |
| 97 | C-8) Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/ Crompton/ Almonard)a) Exhaust fan 10\\"/12\\" size Sch. Sl .20(d) |
| 98 | C-9) Supply and fixing of 60W LED street light fitting(Make-Havells /Philips/Bajaj)A) 60W LED street light |
| 99 | C-10) Supply and fixing Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required a) Standard earthing as per Govt. spcn. |
| 100 | C-11) Supply and fixing of copper plate earthing( 600 X 600 X 3.15mm )with running copper flat 25 X 5mm from copper plate to funnel of 40mm dia G.I pipe including all accessories a) copper plate earthing |
| 101 | C-12) Documentation Charges Please Enable Macros to View BoQ information |
