|
| 1 | Anti Scalant (Food Grade)Physical Appearance – clear, light colored, viscous liquid, Anionic Character: Non-anionicPH : 7 +/- 0.2,Solubility in water: completely soluble Effectiveness: at normal working condition of sugar mills time lag between two general cleanings should be 45 days.Dose: 8 PPMFood grade certificate must be attached. |
| 2 | Viscosity reducer (Fatty Acid/Oil Based) for A & B Massecuite |
| 3 | Viscosity reducer (Polyacralamide based) (Food Grade) certificate for 30% TFM (total Fatty Matter) must be attached. Food grade certificate must be attached.Dose- 900 gm per 40 Ton of C-m/c |
| 4 | Biocides BKC based Active matter should be 50% w/w material (Food grade) Free amine content – 1% Max.Specific gravity – 0.97pH – 7.5 ±1Pack Size – HDPE carboys – 40/50 Kg.Lot No. Manufacturing and expiry date should be mentioned on Bags. |
| 5 | Biocides DTC based Board Spectrum dithiocarbmate base biocide free from any pesticidal residue and approved by FDA (Food grade) active matter should be 45% w/w materialpH – 8.5 ±1Specific Gravity - 1-15-1.2Pack Size – HDPE carboys – 40/50 Kg. |
| 6 | Floculant (Food Grade)It should have high molecular weight, non-toxic, anionic, polyacrylamide & free flowing white granular powder and its particle size should be 98% less than 1000 Micron, pH at 1% solution should be 6.8 to 7.8, free acrylamide less than 0.05%.Lot No., manufacturing and expiry date should be mentioned on Bags.Dose - 1-2 PPM |
| 7 | Magnafloc LT-27/Praesdol LT-27 (inoriginal and Imported packing)It should have high modecular weight non-toxic, anionic, polyacralamide & free flowing white granular powder and its particle size should be 98% less than 1000 Micron, PH at 1% solution should be 6.8 to 7.8 free acralamide less than 0.05%. Lot No., Manufacturing & Expiry date must be mentioned on every bag.Food grade certificate must be attached. |
| 8 | Caustic Soda flakes:Rayon grade conforming to IS/252/1923 having minimum 99.5% purity by weight packed in 50 Kg HDPE bags. Make: Grasim/GACL/Tata |
| 9 | Scale Softener It should be non-foaming type, reduce surface tension, having high penetration of loosening the scale in the evaporator tubes, it should be completely Soluble in water.pH: 12 +/- 1(10% Aqua Solution) Polyacralamide |
| 10 | Colour Wash(Polymer based) (Food Grade) for addition in Mixed juice. ICUMSA Colour should be below/equal to 100Dose 7 PPMFood grade certificate must be attached |
| 11 | Phosphoric acid of 85% H3PO4 and 65% active content P2O5. (Food Grade)MAKE: (GACL/Grasim) |
| 12 | Alezine, Food Grade, Specific gravity 1 to 1.25 base, Polyacralamide base, soluble in water.Dose: Mixed Juice – 65 gm of Alezine should be equivalent to 1 Kg Phosphoric Acid. |
| 13 | Antifoam Polymer Based Active content 40% TFM (Total Fatty matter) Food grade certificate must be attached. |
| 14 | Bleaching PowderOriginal packing of the manufacturer (Chlorine % age – 30%) Make: DCM/PALL/GACL/Exel/Modi/SIEL |
| 15 | Sugar Seed Slurry for low grade masscuite grain size 3-5 Micron, having 5 Kg packing each. Plastic container non returnable quantity of sugar 380 ± 10gm, sp. Gravity 1.89 gm/cm2 |
| 16 | Non-Ionic surfactant to improve purging of low grade massecuite by lowering their viscosity. (Polyacrylamide based Mazu 400 only) |
| 17 | Washing Soda99% sodium carbonate, dosing - 11.8 PPM |
| 18 | Rockwine - SQ ChemicalSulphmic acid dosing - 18.7 PPM |
| 19 | Commercial HCLConsentration 36% - As required dosing - 4.5 PPM |
| 20 | Common SaltSodium chloride (odourless) ) solubility 360 gm/ltr (25° C) dosing - 5 PPM |
| 21 | Color Precipitant for Melt Clarification PlantMake : chemical systemFlocculent MCS - 2pH range : 7-8/food garde dosing – 1.8 PPMFor flue development in melt clarifier .Food grade certificate must attached. |
| 22 | ph Booster (Cooling Tower)Type- Liquid Solubility - Water soluble smell - pungent, Grade - industrial Dosing - 2.25 PPM |
| 23 | Chem Press/Formaldehyde/Preservative |
| 24 | CHEM CHEL |
| 25 | Rodine ChemicalAcid corrosion in inhibitor, Dosing - 1.81 PPM |
| 26 | SMBS (Sodium Meta BI-Sulphite) |
| 27 | HCL for RO |
| 28 | Chem floc PF-605/floc-MCS-2 Appearance : free flowing white powerNature : high molecular weightIonic character : anionicSolubility : readily soluble in waterBulk density : 0.70 to 0.81 g/cm³pH ( Solution In Water ) : 6.9 TO 8.9Degree Of Hydro Lysis : 30%Residual monomer : Less than 0.05 % |
| 29 | pH Booster (MB Outlet) |
| 30 | Roackwin - SQ chemical |
| 31 | Boiler Chemicals for CSM Batala |
| 32 | Ph Booster Alkalnity Indion 1011 |
| 33 | Marpholine Indion 1605 |
| 34 | Oxygen Scvenzer 1520 |
| 35 | Indion 1150 |
| 36 | HCL (Strength 33%) |
| 37 | Indion – 8111 (RO antiscalent) |
| 38 | Industrial Sodium Hypochloride (Specification 12.5% - 15%) |
| 39 | Cartridge Filter (2½” x 30”) |
| 40 | Trisodium Phosphate |
| 41 | SMBS (Sodium Meta BI-Sulphite) |
| 42 | ION Exchange indion Test KitIndion hardness 100 BX Test kit |
| 43 | Indion Alkanity 500 BX Test Kit |
| 44 | Indion Silica 3 BX Test Kit (high range 0-3 ppm) |
| 45 | Indion Silica 0.25 BX Test Kit (Low range 0-0.25 ppm) |
| 46 | Indion Phosphate 50 BX Test Kit |
| 47 | Indion Phosphate 10 BX Teat kit (range 0-10 ppm) |
| 48 | pH meter digital eutech (range 0-14) |
| 49 | TDS Meter digital eutech |
| 50 | Boiler Chemicals for CSM Gurdaspur |
| 51 | Moropholine + PH Booster |
| 52 | Tri Sodium phosphate |
| 53 | Oxygen Scavenger |
| 54 | Cooling Tower Chemicals of CSM GurdaspurCorrosion and scale inhibitor |
| 55 | Bio dispersant |
| 56 | Oxidizing Biocide |
| 57 | Non-Oxidizing Biocide |
| 58 | Sulphuric Acid |
| 59 | Sodium hypochlorite |
| 60 | RO + DM Chemicals of CSM GurdaspurPH booster |
| 61 | RO antiscalent |
| 62 | HCL ( Concentration 33%) |
| 63 | Cation Resin |
| 64 | Anion Resin |
| 65 | Lab Chemicals of CSM GurdaspurAmonia Molybdat 1e, (Make-Fisher/Loba) |
| 66 | Sodium Sulphite, (Make-Fisher/Loba), (500 gm) |
| 67 | Sodium Bisulphate, (Make-Fisher/Loba), (500 gm) |
| 68 | I amine2 naphtol 4 Sulphuric Acid), (100 gm) |
| 69 | Oxalic Acid), ( 500 gm) |
| 70 | N/50 EDTA), ( 500 ml) |
| 71 | Erichrome Black T), (100 gm) |
| 72 | Methyl Orange indicator solution), (125 ml) |
| 73 | Phenolphaline Indicator Solution), (125 ml) |
| 74 | N/50 H2SO4, (500 ml) |
| 75 | N/50 Silver Nitrate, (500 ml) |
| 76 | Glycrol, (500 ml) |
| 77 | HCL for Lab |
| 78 | WTP Spares of CSM Gurdaspur |
| 79 | Silica kit high range – Only Merck |
| 80 | Silica kit Low Range (0.02 to 0.53 mg/L |
| 81 | PVC water ring type strainer |
| 82 | Rubber diaphragm |
| 83 | a) 25 mm |
| 84 | b) 40 mm |
| 85 | c) 50 mm |
| 86 | d) 100 mm |
| 87 | Victaulic coupling |
| 88 | a) 1” |
| 89 | b) 2” |
| 90 | c) 3” |
| 91 | d) 4” |
| 92 | Victaulic coupling rubber gasket 1 |
| 93 | a) 1” |
| 94 | b) 2” |
| 95 | Taflon ball valve 40 mm |
| 96 | RO Membrane Interconnector |
| 97 | RO Membrane End cap Please Enable Macros to View BoQ information |
