|
| 1 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 2 | Of area 3 sq. metres and below |
| 3 | Credit for: |
| 4 | Old unserviceable MS sections, T/Ls, GI/CI/SCI pipes & fittings received from dismantling work. |
| 5 | Old unserviceable/broken brass/CP brass bib cocks, pillar cocks, gate valves & other fittings etc. |
| 6 | Old unserviceable flush/panelled wooden door shutter of area 3 Sqm or below received from dismantling work. |
| 7 | Providing manual assistance by supplying skilled,semi-skilled or unskilled Labour (Beldar) as specified for miscellaneous works which are not covered in scheduled items such as levelling of ground, trimming of trees, shifting store material from one place to other within the compound, assisting skilled labour etc. including necessary T&P required for the work on daily basis as per requirement and direction of the Engineer-in-charge. |
| 8 | Unskilled labour. |
| 9 | Skilled labour. |
| 10 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 12 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 13 | 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 14 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 15 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 17 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 18 | Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in foundations and plinth in : |
| 19 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 20 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : |
| 21 | 20 mm dia (heavy type) |
| 22 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 23 | 100 mm |
| 24 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws. |
| 25 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 26 | Twin rubber stopper |
| 27 | Providing and fixing PVC rigid foam sheet 1 mm thick of approved quality on existing door shutters using synthetic rubber based adhesive as per direction of Engineer-in-charge. |
| 28 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 29 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 30 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15 x 3 mm and nuts & bolts complete. |
| 31 | Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides. |
| 32 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 33 | 40 mm thick with 20 mm nominal size stone aggregate |
| 34 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 35 | (i)Single socketed pipes. |
| 36 | 110 mm diameter |
| 37 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 38 | Bend 87.5° |
| 39 | 110 mm bend |
| 40 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 41 | 110 mm |
| 42 | 12 mm cement plaster of mix : |
| 43 | 1:6 (1 cement: 6 coarse sand) |
| 44 | Neat cement punning |
| 45 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 46 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 47 | Old work (one or more coats) |
| 48 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 49 | One coat. |
| 50 | Two coats. |
| 51 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 52 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 53 | White washing with lime to give an even shade : |
| 54 | Old work (two or more coats) . |
| 55 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 56 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 57 | One or more coats on old work. |
| 58 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 59 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 60 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 61 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 62 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 63 | Cleaning and de-silting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 64 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 65 | Orissa pattern W.C Pan of size 580x440 mm |
| 66 | Closing leakage from G.I. pipes (upto 32mm nominal bore) etc. by replacing damaged fittings such as tee, elbow, sockets, nipple etc. complete as per direction of the Engineer-in-charge. |
| 67 | Repair of cistern by replacing internal fitting kit (syphon) including checking for proper working etc. complete as per direction of Engineer-in-charge. |
| 68 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 69 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 70 | 10 litre capacity - White |
| 71 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 72 | Flexible pipe |
| 73 | 32 mm dia |
| 74 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 75 | Rectangular shape 453x357 mm |
| 76 | Cleaning of manholes by removing deposited silt and other waste material from drainage manholes and sewer lines including rodding and flushing with water as directed.(Rate is per one manhole and sewer line upto next manhole) |
| 77 | Replacing C.P. Brass knob of Bib Cock/Pillar Cock/Stop Cock/Angle valve/Mixer by new one of approved quality as per direction of the Engineer-in charge. |
| 78 | Replacing brass spindle/face of Bib Cock/Pillar Cock/Angle Valve/Mixer etc. by new one of proper size and weight of approved quality as per direction of the Engineer-in-charge. |
| 79 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 80 | 20 mm nominal outer dia. Pipes. |
| 81 | 25 mm nominal outer dia .Pipes. |
| 82 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 83 | 20 mm nominal bore |
| 84 | 25 mm nominal bore |
| 85 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 86 | 45 cm length |
| 87 | 15 mm nominal bore |
| 88 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 89 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 90 | 15 mm nominal bore |
| 91 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 92 | 15mm nominal bore |
| 93 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 94 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 95 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 96 | 15mm nominal bore, 125 mm long foam flow. Weighing not less than 120 gms. |
| 97 | Providing and fixing PTMT grating of approved quality and colour. |
| 98 | Rectangular type with openable circular lid. |
| 99 | 150 mm nominal size square 100 mm diameter of the inner hinged round grating. |
| 100 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 101 | Removal of chokage in P,S or Nahani trap by cleaning the same with water and rodding in associated drainage pipe i/c opening and refixing the door of T joints if rquired complete as per direction of Engineer-in-charge. |
| 102 | Cleening of open surface drain by removing mud, silt, malba, grass etc. and uprooting all the unwanted plants and rank vagetation etc. grown up in drain including disposal of malba outside the compound as per direction of the Engineer-in-charge. |
| 103 | Cleaning of choked water supply G.I. pipe line with pressure machine for proper supply of water i/c opening and refixing of bends, sockets etc. whichever necessary complete as per direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
