|
| 1 | Steel work welded in built up sections, framed work including cutting hoisting fixing in position and applying a priming coat of red lead paint including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) In gratings, framed guards bars ladders, railing, brackets and similar work. in or as per direction of the Engineer- in - Charge |
| 2 | Providing and fixing bubble plastic sheet for panelling including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 3 | Providing and fixing ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 9 mm thick . |
| 4 | Providing and fixing pine wood lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) 12 mm thick |
| 5 | Polishing two coats with P.U. polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 6 | Applying sealar on wood and wood based surfaces to given an even surfaces including cleaning the surfaces of all dirt,dust and sand papering so as to produce a smooth dry and matt surface including stopping & knotting including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 7 | Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. |
| 8 | Providing and fixing 0.80mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc. complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 9 | Providing and fixing magnetic Catchers ISI marked with necessary screws etc complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 10 | Providing and fixing SS handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 120 mm |
| 11 | Providing and fixing 19x6 mm beading section including mitring at juctions with wood screwsa and nails complete . |
| 12 | Providing and fixing Hydraulic channel for drawer in cupboard including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i) 15\\" |
| 13 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) 40mm thick (i)2nd class deodar wood. |
| 14 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)40mm thick 2nd class deodar wood |
| 15 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 150x10mm |
| 16 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 125 mm |
| 17 | Providing and fixing bright finished aluminium door stopper including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 200 mm |
| 18 | Providing and fixing 32x6 mm beading section including mitring with wood screws and nails complete . |
| 19 | Providing and fixing 1.50mm(One point Fifty milimetre) thick PVC antistatic venyl Flooring plain or coloured, carbed or mosaic/metalled finish laid with approved adhesive on sub-floor (damp proofing treatment to be paid for separately) including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 20 | Dismantling tiled floors laid in mortar upto all floor two level including stacking of serviceable materials and disposal of un-serviceable materials with in 20 mtrs.(Twenty metres) lead including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) For thickness of tiles upto 25mm(Twenty milimetre) |
| 21 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. (i) Nominal concrete 1:4:8or richer mix (i/c equivalent design mix) |
| 22 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i)1:2:4 (one cement : two coarse sand) : four graded stone aggregate 20 mm (twenty milimetre) nominal size) |
| 23 | 1:3:6 ( 1 cement 2 sand 4 Graded stone aggregate 20 mm nominal size ) |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (a) Concealed work, including cutting chases and making good the walls etc. (i) 20 mm ( Forty milimetre) nominal outer dia Pipes |
| 25 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (twenty milimetre) thick cement mortar 1:4 (One cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i) Size of tile 600x600mm (six hundred into six hundred milimetre) |
| 26 | Tile work in skirting, risers of steps and dado up to 2 m (two metre) height over 12 mm(twelve milimetre) thick bed of cement mortar 1:3 (One cement :three coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-charge. (i) 8 mm(eight milimetre) thick |
| 27 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm etc wherever necessary complete ( i)25mm dia |
| 28 | Providing and fixing chromium plated brass Phinal rod having wall thickness of 1.25 mm etc wherever necessary complete ( i)25mm dia |
| 29 | Providing and fixing chromium plated brass Curtai necessery complete ( i0 25 mm phinal etc wherever necessary complete ( i)25mm dia |
| 30 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge |
| 31 | Providing and fixing 15 mm mixer for kitchen sink with top / bottom swinging spout make ESSS ESS |
| 32 | Prtoviding and fixing Venity HDHMR with SS 304 hings with wash basin and CP waste including carriage of materials in all leads and lifts as per direction of Engineer - in - charge . |
| 33 | Providing and fixing one piece water closet ovel shaped white including carriage of materials in all leads and lifts as per directions of the Engineer- in - charge make Hindware for equivlents . Make Hindware |
| 34 | Providing and fixing hand faucet including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESS |
| 35 | Providing and fixing 100 mm sand cast iron for gully trap including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 36 | Providing and fixing C.P. Brass Towel rail rack complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 600 mm long towel rail with total length of 645 mm, width88 mm and effective height of190mm, weighing not less than 190 gms. make ESS ESS |
| 37 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESS |
| 38 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESS |
| 39 | Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws:- including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (E.S) MAKESeiko or Equivalent |
| 40 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15 mm nominal bore with 45 cm length MAKE Viking |
| 41 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) Flexible pipe (a) 32 mm dia Make viking |
| 42 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Make ESS ESS |
| 43 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm nominal bore MAKE ESS ESS Heavy duty |
| 44 | Providing and fixing over head shower including carriage of materials in all leads and lifts as per direction of the Enginner -in - charge . Make Ess ESS |
| 45 | Providing and fixing over head shower arm including carriage of materials in all leads and lifts as per direction of the Enginner -in - charge . Make Ess ESS |
| 46 | Providing and fixing divertor including carriage of materials in all leads and lifts as per direction of the Enginner -in - charge . Make Ess ESS |
| 47 | Providing and fixing upper CSLD HF including carriage of materials in all leads and lifts as per direction of the Enginner -in - charge . Make Ess ESS |
| 48 | Providing and fixing Spout with hand shower including carriage of materials in all leads and lifts as per direction of the Enginner -in - charge . Make Ess ESS |
| 49 | Providng and fixing wall Mount for wash basin including carriage of materials in all leads and lifts as per direction of the Enginner -in - charge . Make Ess ESS |
| 50 | Providing and fixing Cornor including carriage of materials in all leads and lifts ap per directions of Engineer - in - chagre . |
| 51 | Providing and fixing CP Brass toilet paper holder with in all leads , lifts of materials and other incidentals . |
| 52 | Providing and fixing 600x700 mm beveled edge mirror of cabnit of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete . |
| 53 | Providing and fixing CP Grating for floors traps or Nahani trap including carriage of materials in all leads and lifts . |
| 54 | Providing and fixing Hydraulic Channel for drawer in cupboard including of materials in all leads and lifts . |
| 55 | Providing and fixing anodised aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, abidused trabsoarebt ir dyed required shade conforming to IS 1868 (Minium anodic coating of grade AC 15) fixed with raw plugs and screws or with fixing clips or with expansion hold fastners including necessary filling up of gaps at junction at top bottom and sides with required PVC/Neoprence felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (a) For doors windows and ventilatiors and glazed partitions frames. |
| 56 | Providing and fixing glazing in aluminium doors and window , vintilator shutters and partition etc with PVC / neoprens gasket etc complete as per the Architectual drawing and the directions of Enginer - in - Charge ( cost of aluminium snap beading shall be paid in basic item ) |
| 57 | Removing dry or oil bound distemper, water proofing cement paint and the like by scraping and sand papering the wall surface smooth including necessary repairs to scratches complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 58 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 59 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade including carriage of materials in all leads and lifts as per the directions of the Engineer-in-Charge. (i) One or more coats on old work |
| 60 | Wall painting (One coat) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. |
| 61 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly leaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. Please Enable Macros to View BoQ information |
