|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 2 | Demolition of stone slab and tiles laid bedded and pointed in any mortar of any size description or thickness in floor, appron etc. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) all as specified and directed. |
| 4 | Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified. |
| 5 | M&L 20-25mm thick machine cut kota stone slab as in flooring, steps of stair(treads), over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the sahde of the slab including rubbing and polishing incl complete all as specified and as directed. |
| 6 | M&L 20-25 mm thick machine kota stone slab as in skirting/dado, riser of steps, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 7 | M&L for Granite stone slab flooring 20 mm thick any colour/shade machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding edges as required to be fixed gate pillar, door, windows cladding/flooring and openings complete all as specified and as directed. |
| 8 | Providing and laying 20 mm thick machine-cut mirror polished marble stone in flooring/skirting in required size and pattern, including filling joints with white cement slurry mixed with matching pigment, curing, rubbing, and final mirror polishing complete all as specified and as directed. |
| 9 | M&L for double charged Vitrified Ceramic tiles 9-10 mm thick (Square/rectangular) of light Shade , polished, area of each tile exceeding 0.36 sqm and n. exc 0.72 sqm and , fixed in floor/skirting etc over set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified. |
| 10 | M&L for non skid ceramic tiles 7 to 8 mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.18 sqm, in floors and scantling etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile complete all as specified and as directed. |
| 11 | M & L for glazed ceramic coloured tiles of size 450X 350X 7mm/ 600x300x7 mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match of tiles, complete all as specified and directed. |
| 12 | M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4) for bedding of tiles complete all as specified. |
| 13 | M&L for 10 mm thick rendering in cement motar 1:4 on vertical surface for bracking of tiles etc of tiles complete all as specified. |
| 14 | M&L for 40mm thick plain cement concrete type B-1 (1:2:4) using 20mm gradedstone aggregate as in sub base all as specified and directed. |
| 15 | M&L for cement concrete (1:2:4) type B-0 (using 12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring/tiles etc complete all as specified. |
| 16 | M & L 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection finished even and smooth without using extra cement, complete all as specified and as directed. |
| 17 | M&L brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6.0 m mean radius built in cement mortar 1:6 complete all as specified. |
| 18 | M&L Brick work with sub class 'B' Bricks, straight or curved on plan to any radius as in half brick thick wall in CM 1:4 complete all as specified and directed by Engineer - in - Charge . |
| 19 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified. |
| 20 | M&L for rendering 10 mm thick in cement mortar (1:6) on brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified. |
| 21 | M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:4, to be finished even and smooth without using extra cement . Complete all as specified and directed. |
| 22 | M&L rendering 10mm thick in cement mortar (1:3) as in ceilings finished even and smooth (without using extra cement) complete all as specified. |
| 23 | M&L for providing 3mm thick wall care putty on wall before applying oil bound distemper and making the surface uniform all as specified. |
| 24 | M&L for providing 3mm thick wall care putty on ceiling before applying oil bound distemper and making the surface uniform all as specified. |
| 25 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified. |
| 26 | M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper over one coat of primer complete all as specified |
| 27 | M&L for preparation of newly plastered surface of wall and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality complete all as specified |
| 28 | M&L for preparation(complete removal of existing treatment) of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint over priming coat premium quality on wall/ceiling surface including applying 2mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth upto 4th storey buildings complete all as specified and directed. Note : (a) Stage for Preparation of surfaces shall be got approved from Engg-In-Charge before applying the finishes.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicator. |
| 29 | M&L for preparation of plastered or unplastered old decorated surfaces by complete removal of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible , filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper over a coat of primer on walls/ceiling including applying 1-2mm thick wall care putty over disturbed surface complete all as specified and as directed. Note : (a) Each stage of complete removal of existing treatment and preparation of surfaces after applying putty shall be got approved from Engg-In-Charge in stage passing register before applying the finishes coat.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicators of manufacturer. |
| 30 | All as per item No.30 here-in-before but on surfaces of ceiling. |
| 31 | Taking down chowkats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) all as specified and directed. |
| 32 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc (Distrubed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same) complete all as specified. |
| 33 | Taking down shutter of any description n. exc 1 sqm each all as specified and as directed. |
| 34 | S&F for Pressed steel frames 105X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified. |
| 35 | S&F for Pressed steel frames 125X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified. |
| 36 | S&F factory made 35mm thick flush shutters , solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified. |
| 37 | S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified. |
| 38 | M&L preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 39 | M&L for preparation of new surfaces of steel or iron work of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer on steel surfaces complete all as specified and as directed by Engr-in-Charge. |
| 40 | S&F Powder coated Aluminium frame for doors, windows, ventilators with or more rebates incl. jointing cleat for fixing etc. Complete all as specified. |
| 41 | S&F Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. |
| 42 | S&F powder coated Anodised aluminium window and ventilator shutters, fixed/side hung type without sash bars, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no) hinges type b-21 100 mm long (2 No) suitable handle (1 No) etc. complete all as specified. |
| 43 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minium anodic coating of grade AC 15) of approved design/pattern with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size of fixing and operation of handles and fixing approved anodised aluminium standard section around the opening , all complete as per requirement and direction. |
| 44 | S&F 100 mm Butt hinges, Stainless steel and fixed complete all as specified. |
| 45 | S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified. |
| 46 | S&F 150 mm size extruded aluminium alloy handles fabricated type anodised and fixed. |
| 47 | S&F 250 mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified. |
| 48 | M&L for 5.5 mm thick sheet glass ordinary quality and glazing each pane fixed with including neopune rubber gasket in aluminium frame work complete all as specified and directed. |
| 49 | S&F 5.5 mm thick black sheet glass and glazing fixed with neoprene rubber gasket in aluminium frame work complete all as specified and as directed. |
| 50 | M&L for 9 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work.complete all as specified and as directed. |
| 51 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified. |
| 52 | S&F for solid colour wood grain printed PVC sheets 5mm thick as in wall panelling inclusive of solvent cement incl necesssary PVC frame work for fixing on brick or concrete wall as per specification and drawing. |
| 53 | M&L Cement concrete 1:3:6 type C–1 (using 20 mm graded stone aggregate) as in filling of pressed steel door frame and hold fast blocks etc all as specified and directed. |
| 54 | Demolition of reinforced concrete on Roofs, floors (other than ground floors), beams/ chajjas and similar suspended work |
| 55 | M&L for RCC 1:2:4 type B1 (using 20mm graded aggregate) as in Slab supported in walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and inshelves and the like etc complete all as specified. |
| 56 | M&L for mild steel TMT bars10 mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns,hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia confirming to TMT bars complete all as specified. |
| 57 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick rough finished inflat surface complete all as specified |
| 58 | Demolition of Mud in roofs, any thickness including plastering and leeping,(whether full thickness removed etc complete all as specified. |
| 59 | M&L for 40 mm thick PCC (1:2:4) type B-0 (using 12.50 mm graded stone aggregate) as in roof padding, sub base of floor coping complete all as specified and directed. |
| 60 | M&L for 15 mm thick plaster in cement mortar (1:4) mixed with water proofing compound on roof slabs finished even and smooth (without using extra cement) after cleaning of roof surfaces with wire brushes complete all as specified.Notes : WPC shall be measured and paid seperately. |
| 61 | Supply only intergral water proofing compound ISI Marked complete all as specified. |
| 62 | M&L for water proofing treatment with APP (Atactic Polypropylene) modified polymeric prefabricated five layer membrane over roof consisting of cleaning of concrete or plaster surface of roof & parapet walls and applying evenly a bitumen primer confirming to IS 3488 @ 0.40 Kg per sqm laid using buten torch and sealing all joints of APP modified polymeric water proofing membrane minimum weight 3.6 kg/sqm reinforced with non woven polyester fabric (weight not less than 160 grams per sqm) unrolled and bonded to substrata with logitudinal and end laps 100 mm and 150 mm respectively as per manufacturer's instructions complete all as specified. |
| 63 | Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified. |
| 64 | M&L for providing plain cement concrete (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in coping or roof kerbs on roof chamfered on edge including trowelling slightly complete all as specified. |
| 65 | Removing bldgs demolished materials / debries exc. 1.50 km but n exc. 5 km and depositing where directed. |
| 66 | Dismantling ceiling board (fiber, pulp insulation) or insulation board/slabs etc including grid work/wooden or aluminium frame works, cover fillet etc Complete all as specified. |
| 67 | S&F for false ceiling with exposed GI system using “SILHOUETTE XL 15 mm (Nominal) designer Grid \\"Armstrong\\" white or Global white with black reveal and 600 x 600 x 15 mm thick prime fine fissured micro look white/coloured tiles (superfine 15mm/silhouette). Making necessary framework for AC ducting, if any and necessary cutouts for diffusers and light fittings, taping and finishing to proper line & level and incl dismantling old undervicable false ceilling complete all as per manufacturer’s instructions and as directed. |
| 68 | M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified. |
| 69 | S& F for machine pressed precast concrete interlocking paver block any shape and size,with grey cement and pigment to match, confirming to IS 15658-2006 of 60mm thick M-35 grade laid over 50 mm thick sand cushioning. |
| 70 | S&F Factory made machine pressed Chequered cement concrete colour tiles 20 cm X 20 cm X25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors , over 20 mm thick screed bed in CM 1 :4 complete all as specified and as directed. |
| 71 | Dismantling of wrought iron of mild steel work of any description in any position not otherwise specifically provided for all as specified. |
| 72 | S&F framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks, grills to balconies fixed to RCC/ brick walls and similar work complete all as specified and as directed. |
| 73 | S&F steel work as in tubular, rafters, purlins, posts and similar work (round/sqare/rectangular shape of pipes as approved by Engr-in-charge ) trusses of semi circle/ curved shape up to height 6 mtr including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240 complete all as specified. |
| 74 | M & L for welded steel wiremesh fabric supplied and fixed through weldding/fixing to flats,etc complete to wood or steel members, weight per square metre n.exc 4 kg complete all as spcified and directed. |
| 75 | S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confirming to Fe 410-S complete all as specified and as directed. |
| 76 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed. |
| 77 | S&F for Fibre glass reinforced coloured translucent semi-corrugated sheeting 2mm thick with two corrugations side lap fixed with coach screw and washer in roof, wall etc. |
| 78 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws as specified & directed. |
| 79 | Taking up or down steel tubing and connections 15mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed. |
| 80 | Taking up or down steel tubing and connections 20mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed. |
| 81 | S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 82 | S & F 20 mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 83 | Dismantling water tanks of capacity exceeding 250 and not exceeding 500 ltrs all as specified and directed by Engineer - in - Charge. |
| 84 | S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres all as specified and directed. |
| 85 | Dismantling water tanks of capacity exceeding 500 and not exceeding 1000 ltrs all as specified and directed by Engineer - in - Charge. |
| 86 | S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified and directed by Engineer - in - Charge . |
| 87 | M&L ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore dia iron pipe supplied and fixed in repairs complete all as specified and as directed. |
| 88 | S&F in repairs 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as directed. |
| 89 | S&F in repairs vitreous china squating pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed. |
| 90 | S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed. |
| 91 | S & F in repairs PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed. |
| 92 | S & F in repair brass CP kitchen sink mixer for mixing hot & cold water screwed down for iron pipe, 15mm dia chromium plated fancy type complete all as specified and directed |
| 93 | S & F in repairs bib taps, long body cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified. |
| 94 | S & F in repairs 15mm dia stop valves/angle valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified. |
| 95 | S & F PTMT Tubular Towel Rail, 20mm dia, D Type, 600 mm long between flanges, fixed with and including Chromium plated brass screws and wooden/plastic cleats [Minimum weight 190 Grams complete all as specified and as directed. |
| 96 | S & F 5 mm thick bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC buildg board or commercial plywood including cutting holes if required and fixed to wooden plugs with CP brass screws and cup washers complete all as specified and directed. |
| 97 | S&F for aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified. |
| 98 | S & F for brass mortice lock vertical type size 100mm 4 levers all as specified and directed by Engr-in-Charge |
| 99 | S&F in repair Double bowl sink (Pearl finish) made of 304 grade stainless steel kitchen sink with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall and connecting union to pipe,overall size 980 mm x 480 mm & bowl size 400X400X 230 mm (02 nos) mm including two number chromium plated waste fittings 40 mm dia & waste pipe complete all as specified and directed. |
| 100 | S&F in repair steel helical door spring 300mm ordinary rat rail rod pattern springs including roller plate complete all as specified and as directed. |
| 101 | S&F Wall Mount Baffle Filter T-Shapped electric Kitchen Chimney complete all as specified and as directed. (Model: CHROMIA BLK 90 AUTO CLEAN CHIMNEY) Make: Hindware/Equivalent in makes specified in list of makes. |
| 102 | S&F 18 mm thick Rajshri WPC celluka ply of plain colour fixed with screws solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete all as specified and directed. Make :- Rajshri Plastiwood/Equivalent) |
| 103 | S&F 18 mm thick Rajshri WPC celluka ply of one side Prelam/Rigidlam and other side balancing laminate colour to make Kitchen cabinet shutter/drawer front shutters complete all as specified and directed. Make :- Rajshri Plastiwood/Equivalent) |
| 104 | S&F 12 mm thick Rajshri WPC celluka ply of plain white colour fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete all as specified and directed. Make :- Rajshri Plastiwood/Equivalent) |
| 105 | S&F 20mm wide & 1mm thick PVC edge bending of PVC pasted on edges with suitable adhesive complete all as specified and directed. Make :- Rajshri Plastiwood/Equivalent) |
| 106 | S&F of auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and directed. (Make : Hettich, Ebco, Prime or equivalent) |
| 107 | S&F extruded brass handle fabricated type 75mm size and complete all as specified and directed (Make : Hettich, Ebco, Prime or equivalent) |
| 108 | Dismantling of MS/CI pipe including fittings of any description, any dia, all as specified and as directed |
| 109 | S&F for cast iron, sand cast, soil, waste & vent pipes, 100mm bore in any length with or without ears with cement joints fixed to walls complete all as specified and as directed by Engr-in-Charge. |
| 110 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittinges, heads, shoes, bends, swan-necks etc as specified. |
| 111 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed. |
| 112 | S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore. |
| 113 | S & F 110 mm bore PVC (SWR) bends with/without door of any radius complete all as specified & directed. |
| 114 | S & F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed. |
| 115 | S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified. |
| 116 | Cutting hole in brick wall built in cement mortar exceeding half brick but not exceeding one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B – 1 all as specified and directed. Please Enable Macros to View BoQ information |