|
| 1 | Taking down cement plaster of any description on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.. |
| 2 | M&L for 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar (1:6) finished even & smooth without using extra cement complete all as specified and directed. |
| 3 | M&L for 5mm thick rendering in CM 1:3 in ceiling finishing the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for applying two coats of Oil emulsion distemper over a coat of primer applied over providing and applying wall care putty of 3 mm thickness in two layer (1.5mm each layer) over newly plastered surface and prepare the surfaces even and smooth complete all as specified and directed.. |
| 5 | M&L for applying two coat of white wash including preparation of new or previously untreated surfaces of walls complete all as specified and directed. |
| 6 | M&L for applying two coat of white washing including preparation of new or previously untreated surface of ceiling complete all as specified and directed. |
| 7 | M&L for applying two coats of Oil emulsion distemper including complete removal of existing treatment on wall complete all as specified and directed. |
| 8 | M&L for applying wall care putty of 3 mm thick in two layers (1.5mm each layer) complete all as specified and directed. |
| 9 | M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mass and efflorescent salts and trading oil and greasy spots and apply two coat of white wash complete all as specified and directed. |
| 10 | M&L for preparation of old decorated surface of ceiling and applying one coat of white washing complete all as specified and directed. |
| 11 | M&L for preparation of old plastered surfaces of walls and applying one coats of Oil emulsion distemper complete all as specified and directed. |
| 12 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 13 | M&L for glazed coloured ceramic tiles (350x250x7mm thick/450x300x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match the colour over and incl 10 mm thick backing layer/rendering in CM (1:4) as in wall complete all as specified and directed. |
| 14 | M&L for Non - skid colured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match over and includings 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and directed. |
| 15 | M&L for Light shade virtified tiles 8-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour incl 15mm thick screed bed in cement mortar (1:6) for laying floor/roof finishes complete all as specified and directed. |
| 16 | All as per item No 15 here-in-above but in skirting with 8-10 mm thick in 10mm backing coat in CM ( 1:4) complete all as specified and directed. |
| 17 | Demolition of concrete in ground floor and pavings n.exc 15cm thick (un reinforced) complete all as specified and directed. |
| 18 | M&L for 75 mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection/path etc finishing the surface even & smooth without using extra cement complete all as specified and directed. |
| 19 | Demolition Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar as in floors, aprons etc complete all as specified and directed. |
| 20 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 21 | M&L for granite (of any type) work 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite granite stone including cutting and polishing etc including 20mm thick screed bed in CM 1:6 complete all as specified and directed |
| 22 | M&L for rounding to edges of granite slabs one edge such as in steps, cooking platforms and other similar situations complete all as specified and directed. |
| 23 | M&L for Drilling holes in granite or trap stone for bolts, pipes, etc. n. exc 25mm dia complete all as specified and directed. |
| 24 | Taking down chowkats or frames exc 1.5sqmm but n.exc 4.00 Sqm (without taking off shutter from the frames) and removal from site complete all as specified and directed. |
| 25 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm 2, modules of elasticity 900 N/mm 2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mmtolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 26 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm sizecomprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm 2 , modulus of elasticity 850 N/mm 2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 27 | S&F 100mm size mild steel butt hinges medium weight complete all as specified and directed. |
| 28 | S&F 100 mm size aluminium anodised cast type handles complete all as specified & as directed. |
| 29 | S&F 100mm long aluminium anodised,barrel tower bolt of extruded section complete all as specified & as directed. |
| 30 | S&F 100mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified & as directed. |
| 31 | Taking down Chowkhats of any description not exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed. |
| 32 | S&F powder coated any description sliding window (three track) with aluminium frame of section 62.30 x 44.50 x 1.5 mm with shutter stiles rail of aluminium section of size 47.62 x 44.45 x 1.5mm thick including jointing cleat for fixing binder hardware glazing clips rubber packing for air lock purpose anodized aluminium strip bearing screw etc for fixing glass pans in frame shutter covered with fully selected quality glass 4mm thick tinted/plain glass with rubber packing and locking arragement and fly proof shutter of same size with aluminium wire mesh complete all as specified and as directed. |
| 33 | All as per item No 32 above but openable/fix type window/ventilator complete all as specified and directed. |
| 34 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 35 | S&F framed work such as grills, gratings etc, with ends of bars, shoulded and/or riveted or forged in spikes, framed guard bars, walk ways, railings, frame work of water tanks and similar works conforming to Fe 290, Gde-E-165 complete all as specified and directed. |
| 36 | M&L for two coats of synthetic enamel painting to new steel surface over a coat of red oxide primer including preparation of surfaces area nexc 10cm width & girth complete all as specified and directed. |
| 37 | M&L for preparation of old steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat synthetic enamal paint complete all as specified and directed. |
| 38 | M& L for prepartation of old painted wooden surfaces of any description, over 10 cm width or girth, not otherwise described and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 39 | Taking up or down 20mm bore steel water tubings and fittings etc complete and making good disturbed surfaces of walls/ceilings or floor etc complete all as specified and as directed. |
| 40 | Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 41 | Cutting chases, pinning in, making good to facing where required and pointing in CM 1:3 for concealed water tubing conduit wiring etc and making good, cutting n.exc 10cm girth as in stone or concrete block walls complete all as specified and directed. |
| 42 | S&F in repair 15mm bore chromium plated brass mixer for mixing hot and cold water for wash basin/sink mixer screwed down for dia iron pipe complete all as specified and directed. |
| 43 | S&F in repair of 15 mm bore angular stop cocks fancy type, chromium plated reduce body screwed down high pressure screwed both ends for iron pipe or for union etc as in repair complete all as specified and directed. |
| 44 | S&F in repairs of 18 / 19mm thick particle board medium density flat pressed,single layer type with BWR type adhesive fixed with screws to timber frame work as in repair including teak wood lipping 6mm thick all round fixed with nails complete all as specified and as directed. |
| 45 | S&F in repairs 25mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame-work complete all as specified and directed. |
| 46 | S&F continuous ( piano) hinges with 30 mm width of flaps ( when open), mild steel bright finish or electrogalvanised fixed with stainless steel screws complete all as specified and directed. |
| 47 | S&F 75mm size brass handles (decorative type) cast type polished bright complete all as specified and directed. |
| 48 | S&F magnetic cupboard catcher made of high quality stainless steel complete all as specified and directed |
| 49 | Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and directed. |
| 50 | S&F powder coated aluminium grid frame work for false ceiling comprising of the following sections for making partitions of 600 x 600m size fixed to walls with rawl plugs & screws and hanged to roof with and including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 51 | M&L 4 mm thick E-board 595 x 595 mm in size,fixed with staple on snap gird as in ceiling with and including dusting of surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. Please Enable Macros to View BoQ information |
