|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) any type and size not exc. 1.5 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) any type and size exc. 1.5 Sqm but n. exc. 4.00 Sqm each complete all as specified and directed. |
| 3 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.5 m height made of (big series) frame 112 x 52 mm & sash 42 x 66 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.20 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh hall be paid separately). (Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.) |
| 4 | Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass paneglazing bead of appropriate dimension (Area of window upto 0.90 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVCextruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixingframe the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass/ wire mess shall be paid separately)Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 5 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.90 sqm.)comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass/ wire mess shall be paid separately). (Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.) |
| 6 | Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 112 x 52 mm & sash 42 x 86 mm both having wall thickness of 2.3+ 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 6.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.20 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frameto finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) (Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.) |
| 7 | S & F 8 mm thick taffan glass , ordinary quality and glazed in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed. |
| 8 | S & F 5.5 mm thick sheet glass , ordinary quality and glazed in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed. |
| 9 | S & F 5.5 mm thick sheet glass , ordinary quality and glazed in square exc 0.5 Sqm in each pane fixed complete all as specified and directed. |
| 10 | S&F stainless steel wire cloth power coating 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed. |
| 11 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 12 | All as per above Item No 11 but double rebare Frames/ Chowkhat of size 65 x 150 mm etc completed all as specified and directed |
| 13 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 14 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative mouldede type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 15 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative moulded type fly proof wire mess door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges, necessary S.S screws ad wire mess shall be paid separately) |
| 16 | S & F 100 mm size Hinge stainless steel 10x6x0.25cm (100 X 60 X 2.5 mm) complete all as specified and as directed. |
| 17 | . S&F 150mm long aluminum anodized barrel tower bolt of cast aluminiun alloy section and fixed all as spd and directed. |
| 18 | S&F extruded aluminium handles, 150mm size cast type anodised complete all as specified and directed |
| 19 | . S&F 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all as spd and directed. |
| 20 | S & F 200 mm Mortise Door Lock Handle Set, (01 lock with handle and keysetc) Suitable for Left & Right Handed Doors (Satin Steel Finish) complete all as specified and as directed. |
| 21 | S & F 140 mm Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring, fixed in floor complete all specified and directed. |
| 22 | S&F 300 mm size mild steel ordinary rat & tail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed. |
| 23 | M&L for dismantling of old board of cupboard , kitchen cabinate etc as in any position and any type etc complete all as specified and directed |
| 24 | S & F Factory made 18 mm thick 100% Solid WPC wood polymer Composite) Plain board of required size comprising of virgin PVC resin of K Value 57 -60 (Suspension Grade ), Calcium Carbonate and nature fibres ( wood powders / rice husk/wheat Extrusion process WPC foam sheet SingleExtruded (inner) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge, Monimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spreade of flame of Classs A category with property of being Termite/Borer Free. Water/Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company. For WC/Bathroom/Toilet/Kitchen & Cabinets. |
| 25 | S & F Factory made 18 mm thick 100% Solid WPC wood polymer Composite) Plain board of required size comprising of virgin PVC resin of K Value 57 -60 (Suspension Grade ), Calcium Carbonate and nature fibres ( wood powders / rice husk/wheat Extrusion process WPC foam sheet SingleExtruded (inner) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge, Monimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spreade of flame of Classs A category with property of being Termite/Borer Free. Water/Moisture Proof, Fire Retardant WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted on both faces of shutter and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company. For WC/Bathroom/Toilet/Kitchen & Cabinets. |
| 26 | S & F 150 mm size designer door handel stainless steel cromimum plated for Cabinet/Wall Unit/Overhead Unit/Wardrobe etc complete all as specified and as directed. |
| 27 | S & F for Hettich soft closure hinges with all fittings at mounting plate of premium quality, fixed in door/cup board shutters complete all as specified and as directed. |
| 28 | S&F 18 inch (45 CM) soft closure hinges telescopic Drawer Channel channels, rollers for smooth sliding of drawers modular kitchen etc complete all as specified and directed. |
| 29 | S&F 20 inch ( 50 CM) soft closure hinges telescopic Drawer Channel channels, rollers for smooth sliding of drawers modular kitchen etc complete all as specified and directed. |
| 30 | S&F Stainless steel basket (Perforated Cutlery Basket SS) of size 445mm x 485mm x 100mm made with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. |
| 31 | Stainless steel thali/plate basket of size 445mm x 485mm x 200 mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. |
| 32 | S&F Stainless steel plain basket of size 445mm x 485mm x 200 mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. |
| 33 | S&F Stainless steel two shelf pullout basket of size 150 mm x 450mm x 430 mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing telescopic basket over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 2260, or equivalent in IPSA/ Hettich as approved by Engr-in-Charge). |
| 34 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 40 mm waste fittings, brass chromium plated with long screwed shanks and fly nuts flange end bedded in red lead cementand other end fixed etc all as completed and specified. |
| 35 | S & F in reapir stainless steel kitchen plate rack minimum size 900 mm x 750 mm x 200 mm including fixing on wallmounted etc |
| 36 | S & F framed work such as in door frame, door shutters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified. incl dismantling. |
| 37 | S & F in repairs stainless steel Curtain Rod 25 mm dia with holders including end to end brakets fixed to wall etc complete all as specified and as directed. |
| 38 | S & F Aluminium alloy powder coated / stainless steel fancy type bracket with new screws for curtain rod complete all as specified and directed. |
| 39 | M&L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off from premises complete all as specified and directed |
| 40 | M&L for demolition to Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed |
| 41 | Demolition of cement concrete any description and any position not otherwise specifically provided for complete all as specified and as directed. |
| 42 | M&L for 15mm thick plastering/rendering on brick work on concrete surfaces in cement mortar (1:3) mixed with liquid water proofing compound as per manufaturer's instructions finishing surfaces even and smooth without using extra cement complete all as specified and directed. (liquid water proofing compound shall be measured and paid sepretaely). |
| 43 | Supply only liquid water proofing compound complete all as specified & directed. |
| 44 | M&L sunkern floor treatment including prepration of concrete/plaster surfaces .and applying the following treatment complete all as specified . (a) Applying 1st course of bitumenous primer @ 0.4 kg/sqm conforming to IS-3384 over roof concrete surface .(b )Applying 2nd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180° C and applied @ 1.2 kg/sqm.(c ) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric 3mm thick weight not less than 3.6 kg/sqm with 160 Grams/sqm non woven polyster made at center core reinforced laid with 150 mm on the width side overlap and 100 mm on long side overlap as per manufacturer instructions . The membrane has to be laid with LPG torch and overlap sealed and finished neat (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 kg/sqm . |
| 45 | M L for PCC 1:5:10 type E-2 (40 mm graded Aggregate) as in sunkern floor , fdn, mass concrete etc allas specified and directed |
| 46 | M & L 25 mm Thick PCC type B-0 1:2:4 (12.5mm graded aggregate) as in flooring, under Tiles and etc all as specified and directed |
| 47 | M&L Virified Ceramic tiles light shade double charged 10 mm thick (square/ rectangular) polished ( Design/pattern in flooring as approved by GE) , area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed |
| 48 | M&L Virified Ceramic tiles light shade double charged 10 mm thick (square/ rectangular) polished ( Design/pattern in flooring as approved by GE) , area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, such as skirting, dados , verticale surface etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3 complete all as specified and directed |
| 49 | M & L Vitrified ceramic tiles light shade double charged 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over 15 mm thick avg screed bed in CM 1:6 complete all as specified and directed. |
| 50 | M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over 15 mm thick avg screed bed in CM 1:6 complete all as specified and dirtected by Engr-in-Charge . |
| 51 | M & L Coloured Glazed ceramic tiles in vertical surface 600 x 300 x 7-8 mm thick, such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over 10 mm thick screed bed in CM 1:3 complete all as specified and directed. |
| 52 | M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in steps with double edge, jambs, pillars, window cills, platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab , notching, moulding and polishing complete all as specified and as directed . |
| 53 | M & L for Granite (of any type) tiles/slab 18 to 20 mm thick machine cut, over cement screed base laid 15 mm thick in CM 1:6 in floor , landing area, etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing etc complete all as specified and directed |
| 54 | M & L for 18 to 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over 10 mm thick cement rendring in CM 1:4 in and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed |
| 55 | Taking up or down 15 mm mm bore steel tubing and connections from any position etc including cleaning for refixing or removal to store complete all as specified. |
| 56 | Taking up or down 25 mm to 32 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 57 | Taking up or down 40 mm to 50 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 58 | S&F 15mm bore medium grade steel water tubing galvanised with all fittings such as tee, elbow, socket, union etc. and fixed complete to walls and ceiling or laid in floors/roofs, and including Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girthetc complete all as specified and directed. |
| 59 | S&F 25 mm bore medium grade steel water tubing galvanised with all fittings such as tee, elbow, socket, union etc. and fixed complete to walls and ceiling or laid in floors/roofs including 06 storey bldg roof to bottom postion etc complete all as specified and as directed. |
| 60 | S&F 40 mm bore medium grade steel water tubing galvanised with all fittings such as tee, elbow, socket, union etc. and fixed complete to walls and ceiling or laid in floors/roofs including 06 storey bldg roof to bottom postion etc complete all as specified and as directed. |
| 61 | S & F in repair of 25 mm bore dia of Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe, complete all as specified and as directed. |
| 62 | S & F in repair of 40 mm bore dia of Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe, complete all as specified and as directed. |
| 63 | S&F in repair 15mm angle cock/ stop valves, with wall flange , fancy type chromium plated cast copper alloy, screwed down, high pressure, with fancy handle, screwed ends for iron pipe or for unions for 15mm bore steel tubing complete all as specified & directed. |
| 64 | S & F in repairs 15 mm bore bib tap (long body) ,fancy type chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specifed and directed. |
| 65 | S & F in repair 15 mm bore two way bib cock with wall flange cast copper alloy , fancy type , chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 66 | S&F in repair Brass CP sink mixer with swinging spout (wall mounted model with connecting legs & wall flangesfor making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. |
| 67 | S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. |
| 68 | S&F brass chromium plated wall mixture 2 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. |
| 69 | S & F Overhead Shower 120X120mm Square Shape Single Flow (Face Plate Stainless Steel & ABS Body in Chrome finish) with Rubit Cleaning Systemwith 300 / 600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed. |
| 70 | S&F in repairs Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified. |
| 71 | S & F in repair full pedestal pattern wash hand basin with pedestal , size of basin 58 × 43.5 × 82.5 cm as approved by GE including brakets , chromium plated brass waste coupling etc complete all as specified and as directed. |
| 72 | S&F Vitreous China wash basin, white, flat back, size 550 x 400 mm including , chain and plug but including brackets or erecting stand including & (32 mm -45 gms/40mm-60 gms ) waste coupling of CP complete all as specified and dirtected by Engr-in-Charge . |
| 73 | S & F in repairs Vitreous china Rimless Bowl With Cistern For Extended Wall Hung WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Accessories Set, Size: 375x630x750 mm including connecetion to drain pipe with all fitting and fixture complete all as specified and as directed. |
| 74 | S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap , seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed. |
| 75 | S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket including flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern etc complete all as specified and directed |
| 76 | Taking down old flushing cistern any type with flushing pipe |
| 77 | S & F in repairs 15 mm bore bib tap chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specifed and directed. |
| 78 | S&F in repair 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed. complete all as specifed and directed. |
| 79 | S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm. |
| 80 | S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm. |
| 81 | S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. |
| 82 | S & F 32/40mm spring type PVC waste pipe fixed toWHB and sink (Note minimum length of each pipe should not be less than 0.80RM), complete all as specified and as directed. |
| 83 | S & F in repairs Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass Min size 300 mm x 300 mm with chromium plated bracket guard and railing complete all as specified and as directed. |
| 84 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 45 cm long complete all as specified and as directed. |
| 85 | S & F in repair Towel Ring Round with Round Flange fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. |
| 86 | S & F in repair Toilet paper Roll Holder with Stainless Steel Flap, and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. |
| 87 | S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed. |
| 88 | S & F in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 89 | S & F in repair 110mm dia PVC (SWR) floor trap, plain with Stainless steel grating / hole grating for waste pipe fixing and including jointing with solvent cement etc complete all as specifed and directed. |
| 90 | M&L in repair 75mm bore PVC (SWR) floor/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 91 | Dismantling of cast iron or PVC Pipe of any dia complete all as specified and directed |
| 92 | S & F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor completed all as specified and directed (Note : Pipe work executed in saft area upto the 07 story building also ) |
| 93 | S & F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls completed all as specified and directed (Note : Pipe work executed in saft area upto the 07 story building also ) Please Enable Macros to View BoQ information |
| 94 | S & F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls completed all as specified and directed (Note : Pipe work executed in saft area upto the 07 story building also ) Please Enable Macros to View BoQ information |
