|
| 1 | Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 2 | M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) complete all as specified and directed. |
| 3 | M & L Brick work using sub class “B” bricks (except brick) straight or curved on plan exc 6 metre mean radius built in CM 1:6 ( Old size brick) complete all as specified and directed. |
| 4 | M&L for Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 5 | M&L for Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 6 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement up to 10.5m height complete all as specified and directed |
| 7 | M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed |
| 8 | M&L for Rendering 15mm thick plaster in CM (1:3) on concrete surface of ceiling finished even & smooth without using extra cement complete all as specifiied and directed. |
| 9 | Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed. (work to be carried up to a height of 7.50m high) |
| 10 | M&L for Prepration of scrapped surface of wall / ceilling and applying 1 to ½ mm thick Asian acrylic damp proof wall care putty in two coats as per manufactur instruction complete all as specified and directed. |
| 11 | M&L for Prepration of new surfaces of wall / ceiling and applying two coats of oil bound emulsion distemper over a coat of primer complete all as specified and directed. |
| 12 | M&L for applying two coats of weather proof exterior emulsion paint (Apex of Asian, weather coat of Berger) of any tint over a priming coat on wall, chajjas, facia etc with mechanical spray mechine complete all as directed. Note : The work will be carried out upto a height of 7.5 m. The rate of scaffolding and guarantee for 3 yeas is included for this item also . |
| 13 | M&L for Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed. |
| 14 | M&L for Preparation of old plastered/unplastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of weather exterior emulsion paint(Apex paint/weather proof of Berger) on walls complete all as specified and directed. |
| 15 | M&L for 75 mm thick PCC 1;3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed. |
| 16 | M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed |
| 17 | M&L for 25mm thick heavy duty Chequered cement concrete tile of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. |
| 18 | M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded agg) used as sub floor finish the surface to receive to tiles including demolition of existing old cement concrete floors etc complete all as directed. |
| 19 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in steps, coping, benching, cills, PCC gola, holdfast and the like including weathering sliglitely rounded or chamfered angles and throating including necessary use and waste of form work including demolition of existing old cement concrete (unreinforced) of any description and in any position for complete all as specified and directed. |
| 20 | M&L for RCC (1:1½:3) using 20mm graded crushed stone aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like including demolition of existing R.C.C complete all as specified and directed. |
| 21 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 22 | Use and waste of form work to edges of concrete flat slab and shelves, not exceeding 20cm Thick for fair finish surface complete all as specified and directed. |
| 23 | Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200mm thick for fair finish surface complete all as specified and directed |
| 24 | M&L for 2nd class hard wood scantling clean swan 40 sqcm and over in section fixed with nails in framed work in any position including dismantling existing timber scantling complete all as specified and directed. |
| 25 | S&F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as directed including dismantling existing ACC sheet. |
| 26 | S&F Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc complete all as directed including dismantling existing sheet. |
| 27 | S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 28 | S&F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable \\"J\\" hook consisting of two Nos washers and two nuts at 1.2 mtr centres, size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed |
| 29 | M&L for Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. |
| 30 | M&L for Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed. |
| 31 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed. |
| 32 | Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 sqm each complete all as specified and directed |
| 33 | Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed |
| 34 | M&L for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging: also fastening and fixing complete all as specified and directed |
| 35 | M&L for Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with ri-veted or welded seams, including bending or turning up, mitred angles, etc. as required fixed in repair complete all as specified and directed |
| 36 | M&L for Mild steel door shutter two leaves with frame of 1 mm thick MS steel (all around) and leaves of 1.00 mm thick MS steel all as per Godrej Pattern with three way locking arrangement with brass lock and C P handle with duplicate keys including two costs of spray painting over a coat of red oxide primer complete in existing cup boards fixed with necessary nut bolts including embedding in PCC 1;2;4 complete all as specified and directedNote.- Area of opening shall be measured |
| 37 | M&L for MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed |
| 38 | M&L for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in bed blocks etc for embedding hold fasts etc complete all as specified and directed |
| 39 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR complete all as specified and directed |
| 40 | S&F Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC \\"C\\" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2020 etc complete all as specified and directed |
| 41 | S& F Factory made extruded WPC (Wood Polymer Composite) Double Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . |
| 42 | S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). →Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . |
| 43 | S& F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . |
| 44 | S& F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 45 | S& F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 46 | M&L 32mm thick factory made solid WPC (Wood plastic composit) moulded gauged door shutter brown, minimum density of 600 kg/cum with wire mesh in any number of division with (Frame size bottom rail 200 to 250mm wide ,middele or lock rail rail 150mm to 250mm wide, Stiles, top and freeze rails 100 to 120 mm wide and glazing bar 75 mm wide, including stainless steel wire mesh shall be fixed with WPC bedding in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again of the shall be as per manufacture instruction complete all as specified and directed. |
| 47 | S&F 30mm thick flush shutter solid core construciton with partical board core and plywood face panels commercial type on both sides complete all as specified and directed |
| 48 | S & F 35mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed. |
| 49 | S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed. |
| 50 | S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed. |
| 51 | S&F Steel ventilator factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed. |
| 52 | S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed |
| 53 | S&F 100 mm size butt hinges medium weight stailess steel colled rolled complete all as specified and directed . |
| 54 | S&F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed. |
| 55 | S&F 150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed. |
| 56 | S&F 100mm extruded aluminium alloy handles, fabricated type, fixed in repairs complete all as specified and directed. |
| 57 | S&F 100mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed |
| 58 | S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed. |
| 59 | S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed. |
| 60 | M&L for Preparing surfaces holding the members in true position and welding in reparis n. exc 2.5 cm in length, thickness of metal to be welded exc 9 mm and nexc 20 mm complete all as specified and directed |
| 61 | Taking down steel window shutter n.exc 1sqm and refixing in the same opening after replacement of broken hinges including welding,grinding, painting etc each complete all as specified and directed |
| 62 | Description all as per item ser No above here-in-before but exc 1 sq. m and n. exc 2 sq. m each |
| 63 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed |
| 64 | Hacking out old broken glass pane of any thickness and size from wooden/metal frame including punching or drilling and glazing pins etc complete all as directed. |
| 65 | S&F 3mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, complete all as directed. |
| 66 | M&L for Preparation of new wooden surface of any description over 10 cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 67 | M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 68 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.6 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. |
| 69 | M&L for Vitrified ceramic coloured tiles 8 to 9 mm thick (Square or rectangular) of premium quality of Group B I (a) polished, area of each tile n exceeding 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured of cement to match the shade of tiles laid over and including 15 mm thick screed bed or bedding layer in CM 1:4 including dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed. |
| 70 | M&L for Vitrified ceramic coloured tiles 8 to 9 mm thick (Square or rectangular) of premium quality of Group B I (a) polished, area of each tile n exceeding 0.36 Sqm, in vertical surface such as skirting dado and riser to step floor etc set and jointed in tile grout to match with and including 10mm thick rendring in CM 1:4 including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed. |
| 71 | M&L Glazed ceramic coloured tiles of size 450x300 x 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick rendring in CM 1:4 including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. |
| 72 | S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe, cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) complete all as directed. |
| 73 | S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe,cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) complete all as directed. |
| 74 | S&F Udaipur green marble work 18 to 20 mm thick (table rubbed and polished) as in flooring, steps, cooking platform and like with and including 20 mm thick cement screed bed in CM 1:6 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including rounding of edges of udaipur green stone and demolition of existing stone slab or tiles with screed bed of any description and in any position complete all as specified and directed. |
| 75 | S&F Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI, concrete bedding and making good existing floor fixed in repair complete all as specified and directed. |
| 76 | S&F Vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, complete including CP jet with necessary PVC pipe fittings fixed in repair complete all as specified and directed. |
| 77 | S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed. |
| 78 | S&F PVC connections 15mm size with PTMT nuts of 600 mm long fixed in repair complete all as specified and directed. |
| 79 | S&F CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. |
| 80 | S&F CP fancy type 2 way Angle valve 15mm dia (angle cock) cast copper alloy with wall flange. |
| 81 | S&F in repair CP Health faucet telephonic type with CP with 1.5m long flexible pipe. |
| 82 | S&F 15mm bore Pillar tap chromium plated fancy type with wall flange and aerator fixed in repair complete all as specified and directed. |
| 83 | S&F 15mm bore long body bib tap chromium plated fancy type with wall flange and aerator fixed in repair complete all as specified and directed. |
| 84 | S&F 15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. |
| 85 | S&F 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repair. (Minimum weight 15mm-90gms/20mm125gms).complete all as specified and directed. |
| 86 | S& F SS six pin wall hanger (Premium Quality) fixed in repair complete all as directed . |
| 87 | S & F Chromium plated Stainless steel wire plate rack of size 30 inch X 30 inch X 10 inch fixed in repair complete all as directed. |
| 88 | S&F SS Sink Waste coupling 4'' inch for Kitchen Sink (Premium Quality) fixed in repair complete all as directed . |
| 89 | Material and labour for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter and one nos wire gauged shutter sliding type, with aluminum sections as per Series-A (15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 6mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50 x15 x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 75 x 26 x1.20mm Chowkhat top & sides size: 75 x 26 x1.20mm |
| 90 | S&F Powder coated aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. (Minimum thickness of powder coating not less than 50 micron) . |
| 91 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. |
| 92 | S&F for decorative aluminium grill weight not less than 3.13 Kg/Sqm (without frame) and 20x20mm aluminium cleat, screwed to main frame/fixed to wall with screws complete all as specified and directed. |
| 93 | S&F Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in repair complete all as specified and directed. |
| 94 | S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs fixed in repair complete all as specified and directed. |
| 95 | S&F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed. |
| 96 | S&F Chromium plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 97 | S&F Chromium plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed |
| 98 | S&F Chromium plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 99 | S&F Chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.. |
| 100 | S&F Chromium plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304 with necessary sliding frame structure, fixing clips etc fixed in repair complete all as specified and directed. |
| 101 | S&F Chrome plated stainless steel wire basket (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding frame structure, fixing clips etc fixed in repair complete all as specified and directed. |
| 102 | S&F 18mm thick prelaminated colour WPC Board having base brown, minimum density of 600 kg/cum, for kitchen cabinet Shutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed. |
| 103 | S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed. |
| 104 | S&F 1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed. |
| 105 | S&F in repairs PVC tank lid/cover water storage tank lid cover (cylindrical) for 500/1000 ltrs capacity tanks, complete all as specified and directed. |
| 106 | S&F in repairs 15 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe complete all as specified and directed. |
| 107 | S&F in repairs 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut complete, screwed for iron pipe complete all as specified and directed. |
| 108 | Repairing to existing door/ window chajjas upto 3.0m span and width 1.0m by demolition/ scrapping of damaged portion and preparing the surfaces by providing 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering sliglitely rounded or chamfered angles and throating over and including priming newly plastered/concrete surface by applying one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified and directed (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). Note: Reinforcement if required shall be measured and paid separately under respective |
| 109 | Taking down existing broken portion of upward / inverted facia or roof slab or visible concrete reinforcement of any thickness and shape and surface area exc 0.50 Sqm but n exc 5.0 Sqm and repaired by providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) mixed with quick setting adhesive inclusive of all necessary reinforcement / mesh and other material including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering slightely rounded or chamfered angles and throating over and including priming newly surface with application of one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified (work to be carried out upto a height of 7.5 m height and rate shall be inclusive of all necessary scaffolding and shuttering) . Note: Reinforcement if required shall be measured and paid separately under respective items of this BOQ) |
| 110 | Taking down existing broken portion of upward, dowanward / inverted facia or roof slab or visible concrete reinforcement of any thickness and shape and surface area n. exc 0.50 Mtr wide repaired by providing cement concrete 1:2:4 type B1 (using 12.5 mm graded stone aggregate) mixed with quick setting adhesive inclusive of all necessary reinforcement / mesh and other material including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering slightely rounded or chamfered angles and throating over and including priming newly surface with application of one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified (work to be carried out upto a height of 7.5 m height and rate shall be inclusive of all necessary scaffolding and shuttering) . Note: Reinforcement if required shall be measured and paid separately under respective items of this BOQ) |
| 111 | M&L, for cutting out cracks to V-section, 15mm X 15mm on existing roofs or terracing, cleaning out, wetting etc and filled solidly with Sika cracksil or Dr Fixit 201 Crack X paste or, Asian paint Smart care crack seal as per manufacturers instructions, finished the roof suface properly, all complete as specified and directed. |
| 112 | M&L, for PCC 1:2:4 , type B0 ( using 12.5mm graded crushed stone aggregates) as in roof padding, laid in proper slope and finished fair and even, complete all as specified and directed. |
| 113 | M&L for Roof treatment through manufacturer /authorized applicator of the manufacturer as approved by GE by applying a coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and laid 3mm thick APP modified five layer polymeric membrane , minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method as per manufacturer's instrutions with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces with grooves & make good in cement mortar 1:3, finally finished with bituminous aluminum paint @ 0.10 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign materials by wire brushing, cleaning roof surfaces with water and removal of spoil from defence premises, complete all as specified and directed. Note :- Work shall be executed by authorised applicator and upto roof height of double storied building. |
| 114 | M&L for preparation of cement concrete ground surface by brooming, washing and scrubing with wire brush to remove algae, fungus and moss growth then apply a 02 coats of acrylic waterproof floor paint for outdoor application acrylic waterproof floor paint as per manufacturers instructions to obtain glossy finish etc all as directed by Engr-in-charge. |
| 115 | M&L for obliterating old writing of any description, n exc 01 sqm with black paint in the form of diamond shape of size not exc 30x30cm and writing letters or figures (Block, Roman Italic or Indian), stops, commas, short lines, dashes, hyphens, brackets etc minimum of 10 cm height (total letters not exc 06 Nos) colour as decided by Engr -in charge complete all as specified and directed (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding). |
| 116 | M & L for vitreous china half stall type urinal pot white (excluding flushing cistern) including flush pipe and waste pipe and socket with grating and union for discharge pipe all as spd and directed |
| 117 | M&L for removing/cleaning of debris of any type from IMA premises to outside of Defence land by using tractor trolley of capacity 6 cm and each trip shall clean minimum 3 cum of material complete all as specified and directed. |
| 118 | M&L for Rubberised polished precast coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 25mm thick sand cushioning layer including dismantling of existing damaged flooring etc complete, all as specified and directed. Please Enable Macros to View BoQ information |
