|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE(I) Kanpur Name of Work : SPL REPAIR TO BLDG NO P-144 (SINGLE JCOs LIVING) OF 8 RAJ RIF AND SPL REPAIR TO BDY WALL ALONG RAILWAY SIDING AT 4 ASSAM UNDER GE (I) KANPUR Contract No : GE(I)/KAN/T-16 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Items/Works Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 3 | Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articals complete all as specified and directed. |
| 4 | Taking down cement plaster on wall including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 5 | Dismantling PVC water tanks and remove to store capacity exc 500 Ltrs and n exc 1000 Ltrs complete all as specified and directed. |
| 6 | Taking up or down steel tubing and connections of 15 mm bore complete all as specified and directed. |
| 7 | Taking up or down 20 mm dia steel tubing and connection including removal of fittings of any type and material complete all as specified and directed. |
| 8 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame) n. exc 1.5 sqm complete all as specified and directed. |
| 9 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm n exc 4 sqm each complete all as specified and directed. |
| 10 | Dismantling of 75 to 100 mm dia CI pipes/fittings jointed in cement mortar fixed to wall or laid in trenches and taking out if required cpmplete all as specified. |
| 11 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 12 | M&L for 7 to 8 mm thick Non skid ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over & including 15mm thick screed bed in CM(1:6) complete all as specified and directed. |
| 13 | M&L for full body Vitrified Ceramic tiles scratch resistant/high grip 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floor, lobby, stair, landing & treads etc. etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 14 | All as per item No 12.00 above but as in skirting / vertical surface, riser etc complete all as specified and directed. |
| 15 | M&L for joint free glazed ceramic coloured tiles of size 450x300 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles, over and including 10mm thick rendering in CM(1:4) complete all as specified and directed. |
| 16 | M&L for Brick work with sub class 'B' brick straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 17 | M&L for 12mm thick ready to use cement based plaster (Ready Mix Plaster) with high quality polymer additive and well graded sand and fillers over wall of brick, stone or concrete including preparing the surfaces clean and made free from dirt, oil grease, concrete sealer or curing compound using a wire brush mopping. Dampen surface with clean water. Water to be mixed/preparation of mortar to be done as per manufacturer instruction complete all as specified and directed. |
| 18 | All as per item No. 16 above, but 5 mm thick on ceiling complete all as specified and directed. |
| 19 | S&F HDPE triple layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Pt-I including for hoisting into position either inside or outside of building, connecting up pipes, securing access cover etc including GI nipple of suitable size and ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore dia iron pipe complete all as specified and directed. |
| 20 | S&F in repair 20mm dia gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 21 | Supplying and laying of 20 mm dia CPVC pipes SDR 11 including CPVC SDR 11 fittings like Brass threded elbow, Brass threded Tee, FBTA, MBTA etc on walls/ceiling or laying in floors complete all as specified and directed. |
| 22 | S&F GI steel tubing 20mm bore medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 23 | Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed. |
| 24 | S&F CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 100 mm bore laid in floor/trenches complete all as specified and directed. |
| 25 | S&F CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 100 mm bore laid on walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed. |
| 26 | S&F CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 75 mm bore laid in floor/trenches complete all as specified and directed. |
| 27 | S&F CI soil waste & vent centrifugally cast spun pipe in any length with or without ears, with cement joints 75 mm bore laid on walls with MS flat iron clamps with 50x6mm and 16mm dia round bar stay of required shape and size inclduing drilling holes and embedded in CM 1:3 surface finished complete all as specified and directed. |
| 28 | S&F in 100mm dia CI bend (any radius) with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 29 | S&F cast iron branch pieces / TEE 100mm bore, single (equal or unequal ) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 30 | S&F CI vent cowl of size 100 mm dia complete all as specified and directed. |
| 31 | S&F 75mm dia CI bend (any radius) with oval access door diminshing pieces or tapers (larger bore measured) complete all as specified and directed. |
| 32 | S&F cast iron branch / TEE pieces 75mm bore, single (equal or unequal ) ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed. |
| 33 | S&F CI vent cowl of size 75 mm dia complete all as specified and directed. |
| 34 | S&F in repairs cast iron floor trap of 75 mm dia, chromium plated grating including jointing to waste pipe with lead joints and fixed in cement concrete 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed. |
| 35 | M&L for preparation of newly plastered surfaces of walls applying a coat of 1mm thick wall care putty on wall including rubbing with sand paper to obtain a smooth surface and then applying two coats of exterior weather proof anti algae 100% acrylic emulsion over and including a coat of exterior water based primer complete all as specified and directed. |
| 36 | M&L preparation of new surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 37 | M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and directed. |
| 38 | M&L for preparation of newly plastered surfaces of walls including cornices plaster etc and applying two coat oil bound distemper of any colour on over and including a coat of primer over and a coat of 1mm thick wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc complete all as specified and directed. |
| 39 | M&L for Preparation of old decorated surfaces of ceiling, including brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent and trading oil and greasy spots etc and applying two coat of white wash on ceiling complete all as specified and as directed. |
| 40 | Complete removal of existing treatment i.e. white wash ,colour wash ,distempering etc. of wall complete , applying a coat of 1mm thick wall care putty on wall including rubbing with sand paper to achieve a smooth surface and sharp straight edges etc. complete as per manufacturer's instructions and directed at site and applying two coats of oil bound distemper (any colour) over and including a coat of primer complete all as specified and directed. |
| 41 | S&F in repair 15mm bore bib tap, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed. |
| 42 | S&F in repair 15mm bore angular stop valve chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 43 | S&F 15 mm bore, brass CP wall mixer (2 in 1) for mixing hot and cold water including provn of overhead shower with 115mm long bend pipe, connected legs and flages including all other connected accessories screwed down for iron pipe complete all as specified and directed. |
| 44 | S&F in repair 15 mm bore, brass CP WHB mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and directed. |
| 45 | S&F in repairs for vitreous china wash basin white flat back size 550x400mm but exclusive taps, wastes pipe, chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand, waste pipe including brackets complete all as specified and directed. |
| 46 | S&F for 15mm bore PVC connection 600mm long heavy duty with brass fly nut and warsher for hot and cold water complete and all as specified and directed. |
| 47 | S&F in repair brass chromium plated shower rose 125mm size complete all as specified and directed. |
| 48 | S&F Soap dish, chromium plated complete all as specified and directed. |
| 49 | S&F in repair Corner shelf with chromium plated grills and toughened glass base complete all as specified and directed. |
| 50 | S&F Mirror cabinet (PTMT Alloy) etc complete all as specified and directed. |
| 51 | S&F in repair Towel rail 20mm dia, 60cm long brass chromium plated with brackets complete all as specified and directed. |
| 52 | S&F in repair health faucet with 15 mm dia 1 mtr long flexible tube and wall hook chromium plated complete all as specified and directed. |
| 53 | S&F in repair 10 ltrs capacity low level PVC dual flushing cistern, valveless, syphonic type, white,with inlet,ball float and handle including brackets complete all as specified and directed. |
| 54 | S&F in repairs chromium plated shower rose 125mm size incl shower arm casted 190 mm long flat shape for wall mounted showers with flange incl fixing to steel pipe or union complete all as specified and directed. |
| 55 | S&F in repair vitreous china wash down water closet pedestal pattern white with plastic seat cover (excluding fixing of bolt of flushing cistern and flush pipe) including toilet paper holder and all fitting complete all as specified and directed. |
| 56 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440 mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding in SSR and including S&F trap set complete all as specified and directed. |
| 57 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 58 | All as per item No. 56 above, but size 60 x 125 mm complete all as specified and directed. |
| 59 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type/wood grain printed colour flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and including S&F with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. |
| 60 | All as per item No. 58 above, but 30 mm thick complete all as specified and directed. |
| 61 | S&F 30mm thick plain WPC factory made wire mesh solid door shutter (confirming as per Is 4020) with density not less than 600 KG/Cum Manufactureed by an ISO 9001-2015 certified company. The door to be pannened with SS mosquito mesh for additional strength and safety purpose Door should be fixed with SS hinges and SS screw Door should be water proof fire retardant and having screw holding capacity complete all as per manufacturer specification and drawings and as per direction of EIC. Note:- SS Wire cloth used shall be of 0.36 mm nominal dia and average width of aperture 1.40mm. |
| 62 | S&F stainless steel butt hinges of size 100mm fixed to door shutter with SS screws incl. other necessary acessories complete all as specified and directed. |
| 63 | S&F 200 mm stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed. |
| 64 | S&F 200 mm stainless steel barral tower bolt of extruded section complete all as specified and directed. |
| 65 | S&F 300 mm Stainless steel sliding door bolt with hasp and staple (bolt type) including fixing with necessary accessaries complete all as specified and directed. |
| 66 | S&F 75mm long aluminum anodised extruded type door stopper of double legged with rubber shoes in bottom complete all as specified and directed. |
| 67 | S&F 3 track window frame (124mmx50mm) shutter of uPVC solid foam profile window sill element FP 12419 (124 mm x 19 mm thick) and 3 track sliding element FP 7132 (71 mm x 32 mm) grooved sill element. Sliding shutter are made of vertical and horizontal stile element FP7128 (71 mm W x 28m thick) having GI 'C' section (39 mm x 19 mm x 19 mm x 0.60 mm thick stiffener and telescopic 'L' corner, Infill panel is 5 mm thick glass is fixed in the shutter using beading element 12 mm W x 10mm thk by SS headless nails including SS wirecloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with S.S staple pins window frame is strengthen by GI clamps (120x120x75mm) at all four corners. External /internal cover moulding/architrave is provided to cover gap between masonary wall and frame due to plumbing error in masonary work and elegant look all complete as specified and directed. No extra payment will be made for glass, gauze and fittings incl making provn for window AC) |
| 68 | Providing and fixing factory made uPVC white colour fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality as per approved drawing complete all as specified and directed. (Single / double glass panes (plain/frosted) and silicon sealant shall be inclusive in rates). |
| 69 | S&F, stainless steel curtain rods of 25mm dia as in doors/ windows pelmets.SS brackets fancy type, including screws and other necessary fitting(knob) for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed. |
| 70 | Dismantling of boarding, any descripsion, fixed in any position with nails complete all as specified and directed. |
| 71 | S&F HDF-HMR (High Density Fibre Board Moisture Resistant) of thickness 18 mm with decorative choice lamination on one side and plain colour on other, having minimum density of 850 Kg/Cum, lead free, anti-bacterial & anti fungal, termite & borer proof & water proof including cutting, screwing as in kitchen cabinet, cupboard shutter also matching the sawn edges using same colour edge band tape complete all as specified and directed. |
| 72 | S&F 20 mm width Continuos (piano) hinges, brass complete all as specified and directed. |
| 73 | S&F 100 mm long hasp and staple, safety type, brass with mild steel hinge pin inculding bolt to hinge plate and fixed and screws complete all as specified and directed. |
| 74 | M&L 150mm size stainless steel handles of design approved by GE complete all as specified and directed. |
| 75 | S&F Magnetic catcher heavy duty of approved quality in cupboard / wardrobs including fixing with necessary screws complete all as specified and directed. |
| 76 | Dismantling of terracing tiles/brick tiles single layer on roof,laid bedded and pointed in any mortar complete all as specified and directed. |
| 77 | Demolition by using hand held electric drills, cutting machine, chisels etc (direct use of hammers on RCC roof for demolition is strcitly prohibited) of roof treatment including padding concrete of any description including mud in roof any thickness with and including roughening old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed. |
| 78 | M&L for cement concrete type B0 (1:2:4) (using 12.5 mm graded stone aggregate) as in padding and coping,incl hunching, benching etc complete all as specified and directed. |
| 79 | M&L preparation of newly plastered sufaces of roof including cleaning the surfaces by using wire brush / pressure hose and applying high performance polyurethene liquid membrane waterproofing coating cold applied in two coats @ 1.5Kg /Sqm/ 2 coats spray/ brush applied, with an elongation of 300% to 700% and tensile strength of not less than 1.5 N/Sqmm as per ASTM D412 and ASTM D2370, crack bridging abiltity of 3.5mm as per ASTM C1305, shore a hardness of not less than 60 as per ASTM D2240. The item includes applying epoxy primer @ 0.15Kg/Sqm and a geotextile of 40 GSM to be applied over first coat while first coat is still wet, complete as per manufacturer's instructions complete all as specified and directed.Note:1. The contractor shall submit a gurantee of 10 years from the date of completion of work for waterproofing treatment alongwith manufacturer's gurantee. The amount of Rs. 40 (Forty) per Sqm and min of Rs. 4000/- for waterproofing treatment shall be withheld from contractor's final bill till the expiry of gurantee period. The contractor at his own option may furnish fix deposit receipt pledged in favour of GE(I) Kanpur against guarantee money. 2. The water proofing shall be carried out by authorised applicator of manufacturer. The name of applicator shall be got approved from GE before commencement of work. |
| 80 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitings and hanging also fastening and fixing complete all as specified and directed. (Fe-290 Gde E-165) |
| 81 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path/ plinth protection finished the surfaces even & fair complete all as specified and directed. |
| 82 | M&L for preparation of new steel or iron surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat zink chrome red oxide primer complete all as specified and directed. |
| 83 | Taking down existing sunken portion treatment by demolition of old concrete and carry out the sunken treatment as in following steps given below and procedure as per Appendix 'A' of Particular specifications :(a) S&F of drainage spout GI pipe 40 mm dia bore light grade upto outside of outer wall (Approx 450 mm to 600 mm long). (b) M&L for PCC 1:1.5:3 type A-0 (using 12.5mm graded stone agg), 50 mm thick laid in slope towards drainage out spout pipe mixed with waterproofing chemical as per manufacturer instructions of MAKE :FOSROC/SIKA/ Pidilite/STP. Khurra 150mmx150mm (min) at appropriate location for free flow (of leaked water if any) towards drainage spouts shall be provided integrally while laying PCC.Fixing of spout shall be done with same PCC as in this item. (c) M&L for 18 mm thick cement platster in CM 1:3 on vertical faces mixed with water proofing chemical of MAKE :301 Pidicrete URP of Dr Fixit or other techno commercially Equivalent make of SIKA/ Pidilite/FOSROC/STP(d) Item no 82 (c) shall be executed while concrete is green as per item no 82 (b) above and proper curing and ponding test shall be done before laying drainage/water supply pipes upto the entire satisfaction of Engineer in charge. (e) Applying two coats of SIKA TOP seal 107 of SIKA or other techno commercially Equivalent make of FOSROC /Pidilite/Dr Fixit/STP on vertical as well as horizontal surface.(f) Drainage and water supply pipe if required & test for leakage/sanitary pipes and shall be laid to slope and a clear gap underneath the pipes shall be made available by providing suitable cement concrete blocks. |
| 84 | (g) M&L PCC1:5:10 type E-2 using 10-40 mm graded stone aggregate as reqd depth at site over and including 150mm thick 20mm single sized stone agg to provide a filter media.(h) M&L PCC 25 mm thick 1:2:4 type B-0 using 12.5 mm grade stone aggregate as level course. (j) M&L for 7 to 8 mm thick non skid ceramic coloured joint less tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc; laid jointing in neat cement slurry and pointed filled with epoxy chemical make: SIKA/FOSROC/PIDILITE/ Dr Fixit/STP.mixed with pigment to match with shade of tiles over and including 15 mm thick screed bed in CM ( 1:6 ) complete all as specified and directed.(k) Note for item : (i) Waterproofing Treatment shall be undertaken alongwith laying of drainage pipes/Sanitary pipes/ Drainage Spout etc (ii) The work shall be carried out as per the direction of Engineer in Charge. (iii) The sunken treatment work shall only be carried out after written approval of Engineer in charge for Leakage/seepage of water/sanitary pipes. (iv) Cost of drainage spout shall deemed to be included in the item however sanitary pipe, water pipe line if required shall be paid separately under respective item.(v) Laying of Chemical required for varios applications shall be as per manufacturer instructions. (vi) Plan area shall only be measured and paid. |
| 85 | Supply only water proofing compound complete all as specified and directed. |
| 86 | S&F framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 87 | Demolition of reinforcement cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 88 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed. |
| 89 | M&L for 15mm thick rendering on fair faces of brick wall in CM 1:6 finished even & fair including required scafolding etc complete all as specified and directed. |
| 90 | M&L for 15mm thick rendering on other side of lathing of brick wall in CM 1:6 finished even & fair including required scafolding etc complete all as specified and directed. |
| 91 | S&F Mild steel work like angle iron,flat iron etc in posts and struts in fencing including to shape as directed,drilling holes,notching for wire etc conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 92 | M&L for PCC 1:3:6 Type C2 (using 20mm graded stone aggregate) as in bed blocks of angle iron post, etc complete all as specified and directed. |
| 93 | S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc complete all as specified and directed (Each line wire to be measured). |
| 94 | S&F concertina coil RAZOR type barbed wire (reinforced barbed type) complete all as specified and directed as mentioned below :- (i) Dia of coil when unstrtched 600mm. (ii) No of circles per coil - 50 to 53. (iii) Weight of each coil 9.50 Kg to 10 Kg. (iv) Length of coverage per coil 6RM. (v) Central core wire - Made from high tensile spring steel core wire confirming to IS-4454 duly hot dipped galvanised with diameter 2.59mm + 0.05mm. UTS 145-160 kf/sqmm, zink coating 250-300 gm per sqm. (vi) Strip-Electro galvanised steel strip 0.5mm + 02mm thick of width 19mm confirming to IS 1573, zinc coating (120gm/Sqm) and bituminised dipped with of bars 11.5mm, pitch of barbs 25.4mm + 0.2mm. (vii) Clips :- AISI 304-1.5mm thick C&U clips 'C' clips shall be used for fixing coils and RBT wire. \\"U\\" clips shall be used for joining one coil to another coil and RBT wire. (viii) No of clips for each coil 125. (ix) Handles and spikes shall be provided as required. |
| 95 | M&L for Reinforced cement concrete Type B1 1:2:4 (nominal mix) (using 20mm graded stone aggregate) as in beams, cantilevers lintels etc complete all as specified and directed. |
| 96 | M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, ressummers,lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 97 | Providing TMT bars 5 mm dia and over up to and including 10mm , cut to length, bent to shape required incl cranking, bending, spirally for hooping for columns etchooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specfied and directed. |
| 98 | M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint (any Colour) over and including a coat of primer complete all as specified and directed. |
| 99 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell, bell push etc and making good disturbed surfaces of walls, floor to match with existing specification complete all as specified and directed. |
| 100 | M&L for point wiring for one light/fan/bell/exhaust fan point/ controlled by one switch with 1.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable FRLS with proper colour coding and 1.5 sqmm PVC insulated unsheathed copper conductor single core multistranded cable (green colour) as earth lead in and including concealed non metalic rigid PVC conduit medium grade size not less than 20mm dia with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size & as directed by Engr in Charge & 3 mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed. |
| 101 | All as per item No 98.00 above but for one 3 pin 15 Amps socket outlet independent with 2.5 sqmm PVC insulated unsheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories complete all as specified and directed. |
| 102 | All as per item No 98.00 above but for one socket outlet 5 amps on independent board including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories complete all as specified and directed. |
| 103 | All as per item No 98.00 above but for one socket outlet 5 amps on same board including pressed steel terminal modular boxes of appropriate size and top cover with suitable size of modular plate with all accessories complete all as specified and directed. |
| 104 | M&L for switch modular type single pole one way 1 module 6 amps 240 volts complete all as specified and directed. |
| 105 | S&F switch modular type one way 1 module 16 amps 230 Volts complete all as specified and directed. |
| 106 | M&L for switch modular type single pole two way module 6 amps 240 volts complete all as specified and directed. |
| 107 | M&L for socket 6 amps modular type 2/3 pin combined 2 module, 230 volts complete all as specified and directed. |
| 108 | M&L for socket modular type , 2/3 pin, 6 and 16 amps combined 2 module, 230 volts complete all as specified and directed. |
| 109 | M&L for ceiling rose surface bakelite 3 terminals complete all as specified and directed. |
| 110 | S&F of LED Aluminium batten luminaire surface mounted 4 feet system wattage of 20/22 Watts with lifetime of not less than 50000 burning hours with 70% of its initial lumen maintained.CRI>80, Power Factor>.95 ,THD<20% ,Surge protection 3 KV in CM, IP-20n Protected , meets LED IS Specifications , Class-1 , short circuit and over circuit protection voltage range-150 to 270 AC,system efficiency at luminaire level > 100lumen/watt and ibncluding connecting up with pvc sheathed 1.5 sq mm 3 core copper conductor flexible wire from ceiling rose to fitting fix complete all as specified and directed. Note:- All the above mentioned specifications will be verified through LM 79 and LM 80 report of NABL accredited lab before supply of LED fixtures. |
| 111 | S&F LED in repair wall security light 20/25 W pressure die cast aluminium IP-66 road way luminaries with high power LED as light source having efficacy 120 lm/W complete all as specified and directed. |
| 112 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, in extruded aluminium housing 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexiblecopper conductor cable of suitable size complete all as specified and directed. |
| 113 | S&F VTPN distribution board , double door with IP-43 Ekinox 3 IK-09 protection with acrylic door as per IEC 61439-3 suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete with one MCCB 4 pole 415 Volts 125Amps rating with rupturing cap 16 KA (ICS=ICU 100%) of the same make as of VTPN distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as specified and directed. |
| 114 | Supply and fix sheet metal enclosure MCB SPN DB , 8 way double door with IP-4 acrylic door as per IEC 61439-3 protection with appropriate size copper bus bar complete all as specified and directed. |
| 115 | S&F amp rating 240 V, 10 KA 'C' curve miniature circuit breaker (MCB) 5 to 32 Amp in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 116 | All as per item No 113.00 above but SPN 40 to 63 Amp complete all as specified and directed. |
| 117 | M&L for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLS) of size 4 Sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 4.0 Sqmm as earth lead in & including concealed PVC conduit medium grade 32mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed. |
| 118 | All as per item No 115.00 above but of 6 sqmm complete all as specified and directed. |
| 119 | M&L for Earthing with galvanised iron earth plate electrode of size 600x600x6mm thick as earth electrode with top edge of the earth plate not less than 1.5mtr below ground level using GI wire 4mm dia as earth continuity conductor connected to earth plate by means of GI thimbles nuts bolts washers all as directed including providing earth wire protection pipe GI light grade15mm dia from earth plate to main switch board/panel, watering pipe 20mm dia with wire mesh and funnel at top, earth pit and RCC pit cover in PCC 1:3:6 adequate quantity of charcoal dust and salt all around the erth plate, earth work in any type of soil remaing surplus excavated material all as required at site and specified in EP No 5 of SSR part I 1991 or directed by Engineer-in-charge and testing on completion. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
