|
| 1 | Taking down (Door) chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (without taking off shutters from the frames) complete. |
| 2 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm both side Prelam PVC sheet used instead of plain colour PVC Sheet and edge will be painted to match with prelam sheet. reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified and as directed. |
| 3 | S&F Factory made solid panel PVC Moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. Clause No. 8.B.1 to 8.B.10 and drawing on page No. 156 & 157 of MES SSR-2010 Part-II complete all as specified. |
| 4 | Taking down shutters with chowkhats any description exc 1.00 sqm but not exc 2.00 Sqm each and refixing the chowkhaks with shutter in same opening after easing and adjusting/repairing complete as directed by Engineer incharge. |
| 5 | M&L for factory made pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate 12mm bar thresh hold etc. complete , of frame size 105mm x 60mm, including one shop coat of red oxide zinc chrome primer complete all as specified. |
| 6 | M&L for factory made pressed steel frames for doors made out of 1.25mm thick MS sheet with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate 12mm bar thresh hold etc. complete , of frame size 125mm x 60mm, including one shop coat of red oxide zinc chrome primer complete all as specified. |
| 7 | S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, with decorative face veneer on both faces with lipping/ frame to match complete all as specified and as directed by Engr-in-Charge. |
| 8 | S&F stainless steel butt hinges, size 150 mm complete, complete all as specified and directed by engineer-in-charge. |
| 9 | S&F aluminium anodised barrel tower bolts, 150 mm long of extruded section and fixed, complete all as specified and directed by engineer-in-charge. |
| 10 | S&F aluminium handles, 150 mm size, fabricated type, complete all as specified and directed by engineer-in-charge. |
| 11 | S&F 300mm aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete, all as specified. (ISI Mark) |
| 12 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for including removal the rubbish/demolished material outside defence land, complete all as specified and as directed. |
| 13 | S&F in repair for mild steel, 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified. |
| 14 | M&L for 10 mm thick rendering with readymix plaster (as per manufaturer's instruction) on face of brick or concrete surfaces finished even and smooth surface without using extra cement on wall of up to three stories bldgs including taking down of existing plaster complete all as specified and as directed. Make of ready mix plaster : Birla Aerocon/Ultratech radiplast/ACC acoplast. |
| 15 | M&L for 5 mm thick rendering on ceiling surfaces with readymix plaster (as per manufaturer's instruction) on face of brick or concrete surfaces finished even and smooth surface without using extra cement on wall of up to three stories bldgs including taking down of existing plaster complete all as specified and as directed. Make of ready mix plaster : Birla Aerocon/Ultratech radiplast/ACC acoplast. |
| 16 | M&L for complete removal of existing treatment under (OBD/Oil paint/ white wash etc) by scrapping with mechanical wall sander on wall/ceiling (having mechanical vacuum mechanism) having RPM not less than1500, sending pad of 80 grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint , removal of nails etc and filling cracks/ holes and windows /doors jams by putty & repairs in good shape by skilled labour complete all as specified and directed. |
| 17 | M&L for cement based putty @ 1KG (undiluted) per square meter of average thickness 1 mm over the plastered/Old painted wall /ceiling surcafes to make the surface free from dust etc, by skilled labor as per following steps :-Step 1 :- Mix the putty powder by adding water as per manufacturer instructions and mix it with wall mixture with the mixing capacity of minimum 2.5 kg putty per minute Step 2 :- Applying the first coat of prepared mixture with the help of fully automatic airless spray machine of putty application having flow speed of maximum 6 liters per minute with a maximum pressure of 3300 PSI.Step 3 :- Allow 6-8 Hrs time to dry the putty surface. |
| 18 | M&L for applying two coat of oil bound distemper on wall/ceiling using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Make Asian or equivalent. |
| 19 | M&L for applying two coat of oil bound distemper on wall/ceiling on new plastered surfaces using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 Mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by pain manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Make Asian or equivalent |
| 20 | M&L for preparation of old plastered surfaces of wall / ceiling applying two coats of white wash including scaffolding arrangement, trestles, ladders complete all as specified and as directed. |
| 21 | M&L for preparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 22 | M&L for preparation of old painted surfaces of steel of any description over 10cm width or grith and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 23 | S&F in repairs, Sink mixer for mixing valve 15mm dia wall mounted with 165mm long swivel spout, connecting legs and wall flanges, Hot and Cold CP brass fancy including joints to steel pipe or unions , including fittings, complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F in repairs, Single or double leaver central hole mixer for mixing with 450mm braided connection pipe 15mm dia, Hot and Cold CP brass fancy including joints to steel pipe or unions for Centre hole wash hand basin, including fittings, complete all as specified and directed by Engineer-in-Charge. |
| 25 | S&F in repairs, Wall mixer with bend pipe for overhead shower mixing valve Hot and Cold water Screwed Down for iron pipe 15mm dia CP brass fancy including joints to steel pipe or unions , including fittings for, complete all as specified and directed by Engineer-in-Charge. |
| 26 | Supplying and laying of CPVC 20 mm dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all brass fitting (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down of existing GI steel tubing complete all as specified and as directed. |
| 27 | Supplying and laying of CPVC 25 mm dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all brass fitting (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down of existing GI steel tubing complete all as specified and as directed. |
| 28 | M&L for steel water tubing of nominal bore 32mm medium grade galvanised with all fittings including short lengths, fixed to walls or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down of existing GI steel tubing complete all as specified and as directed. |
| 29 | M&L for steel water tubing of nominal bore 40mm medium grade galvanised with all fittings including short lengths, fixed to walls or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) including taking down of existing GI steel tubing complete all as specified and as directed. |
| 30 | S&F in repair SS towel Rail fixed with sutable screw complete all as specified and as directed. |
| 31 | S&F in repair SS towel Rack fixed with sutable screw complete all as specified and as directed. |
| 32 | S&F corner glass shelf with chromium plated guard rails fixed as in repairs complete all as specified and directed. |
| 33 | S&F in repairs, CP brass health faucet alongwith 1.00 to 1.50 meter good quality SS flexible connection pipe suitable for 15mm bore pipe, complete all as specified and as directed. |
| 34 | S&F vitreous China wash basin, white, flat back, size 550x400mm pedestal excluding tap, chain, plug but including brackets, waste fitting 32mm dia ,brass chromimium plated for glazed ware sink, basin,with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified. |
| 35 | S&F in repair Vitrous china wash hand basin white, ovel type over counter Wash hand basin size 550x420mm, including necessary waste pipe and coupling, Fixing in Granite countern complete all as specified and as directed. |
| 36 | S&F in repairs vitreous China wash down water closet pan pedestal pattern or EWC type, white (excluding fixing bolts, flushing cistern and flush pipe) with P or S trap but including plastic water closet seal, seat cover ,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device including connection to drain and flush pipe complete all as specified. |
| 37 | S&F in repairs of plastic WC seat cover white / off white closed pattern with flat bottom end cover and mild steel CP hinging device complete all as specified and as directed. |
| 38 | S&F in repairs, PVC valveless, syphonic action type, flushing cistern of 10 Ltr capacity, low level, white, with inlet, ball valve, float and handle, one number PVC connection, with brass nuts including PVC 'L' bedn pipe fitted to WC and brackets to fix the flushing cistern with wall, complete all as specified and as directed. |
| 39 | S&F in repairs, PVC waste pipe 32mm bore, 65cm long plain/ corrugated including suitable adopter, complete all as specified and as directed. |
| 40 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified |
| 41 | S&F Toilet paper holder of vitreous china fixed to wall with chromium plated (CP) brass screws, complete all as specified and as directed. |
| 42 | S&F MS chromium plated peg set of five fixing with wall / door, complete all as specified and directed by engineer-in-charge. |
| 43 | S&F stainless steel grating dome 100/125 mm dia of best quality, complete all as specified and as directed. |
| 44 | S&F in repairs, Brass chromium plated shower rose 125mm size with arm, complete all as specified and as directed. |
| 45 | S&F in repairs for stainless steel plate rack made of 1mm thick stainless steel sheet of size 975 mm x 750 mm x 250mm consisting of 4 shelf for bowls and three shelf for keeping then nos of big size plates, ten nos medium size plate and seven nos of small size plates divided by 10mm dia stainless steel hollow pipe @ 60mm centre to centre, complete all as specified and as directed. |
| 46 | S&F in repairs Sinks with drainage board made of 1mm thick stainless steel for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including PVC waste pipe 32 mm bore, 65 cm long complete. |
| 47 | S&F in repair 15 mm angle valve / stop cock chromium plated, cast copper alloy screwed down high pressure fancy type, chromium plated with long shank and cup (concealed type) screwed for both ends for iron or for unions complete all as specified and as directed. |
| 48 | S&F in repairs two way Chromimum plated bib cock 15mm dia with single handle and wall flange complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F in repair Bib taps long body 15mm bore, chromium plated cast copper alloy, fancy screwed both ends complete all as specified and as directed. |
| 50 | S&F CP / PVC connection 15mm size with brass nut of length 450mm / 600mm for hot water pipe,complete all as specified and as directed. |
| 51 | S&F in repair Bevelled edge mirror of 5 to 6 mm thick selected quality glass, 900 x 600 mm size, mounted on 6 mm thick AC Building board or commercial plywood and fixed to wooden plugs with Chromium plated brass screws and cup washer complete all as specified and as directed. |
| 52 | S&F in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 53 | S&F in repairs 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 54 | S&F in repairs 50mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 55 | S&F in repair deco door seal bottom brush dust stopper strip aluminium plate with nylon brush for cover the bottom door gaps between 20-25mm including fixing with steel screws etc, complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 56 | S&F in repair deco door seal bottom brush dust stopper strip aluminium plate with nylon brush for cover the bottom door gaps between 20-25mm including fixing with steel screws etc, complete all as specified and as directed. Please Enable Macros to View BoQ information |
