|
| 1 | S/F of Multipurpose board consisting 2nos 5amp Switch and 2nos 5amp Socket as per direction of Engineer in Charge. |
| 2 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required including the cost of labor & material T & P as required as EIC.2 X 2.5 sq. mm + 1 X 1.5 sq. mm |
| 3 | 2 X 4.0 sq. mm + 1 X 1.5 sq. mm |
| 4 | S/F of 180W LED Sports Light fitting (25000 Lumen) with 80CRI (4KV inbuild & 10KV external surge protection, IP66, Aluminium die cast body,cool white-(4000 to 5700K ),Impact resistance of IK08, Over current, short circuit, over voltage , dust & water protection, entire luminarie should act as Heat shrink(LED life>50000 burning hour), mounting must have eye bolt hook type, The fixture must have 3-4mm thick safety glass cover with BIS Certified driver of IP66 protection & fixture must have Two nos LED Driver as required of make Moso/Inventronics/Sosen Including fitting accessories. Light Fixture of make Havells/Philips/Bajaj)Replacement Warranty will be 2 years |
| 5 | Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials |
| 6 | Supplying, installation, of exhaust fan of heavy duty 600 mm sweep 1400 rpm with louvers (Make- Havells/Crompton/Usha/Orient/Bajaj ) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years. |
| 7 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge. |
| 8 | Supply of 25sq mm 3-1/2 core XLPE insulated Aluminium Armoured cables ISI marked |
| 9 | SITC of High Pulse Voltage OPR 60/ESE-60 Early Streamer Emission (ESE) with radius of protection of 79 mtrs in level-1 accordance to NFC-17-102 standards. The Air termination shall be of the type that response dynamically to the appearance of a lighting conducrtor should deliver a unique gain time in efficiemncy anticipating the natural formation of an upward leader that propagates rapidily to capture the lighting stroke andconduct it towords the ground. (Make -ABB/STOR4MKING/Indelec/paratonex/Satellite 3) |
| 10 | Supply and Fixing of Air Teerminal; support mast of 5mtrs height for mounting of OPR 60/ESE30 with guy wire and base plate.(Make -ABB/STORMKING/Paratonex) |
| 11 | Supply and installation Lightening striker Recorder (L.S.R) of Australian Make LSR it should be non electronics non resettable type having 6 digits display and enclosed in an IP67 enclkoser with minimum sensitivity of 1000A and maximum capacity of 220KA tested on 8/20 micro second wave from as per IEC 60-1:1989. it should be non electronics type and does not require external power supply for working model LSR.(Make -ABB/STORMKING/Paratonex) |
| 12 | S/F chemical Earthing with 2.4mtrs copper bonded rod and 50KG Chemical compound including supply and installation of Earthing chamber work and Hingcover as per 4 I.E Rules (CPRI certified for S.Ccurrent ). |
| 13 | S/F of clamp for fixing of copper bonded rod in earthing |
| 14 | Suply of down conductor 70 sqmm single core insulated flexible copper cable with necessary accessories etc.(Make-Polycab/Finolex/Havells/KEI/Equivalent) |
| 15 | PVC pipe 25 mm dia and other all acessories |
| 16 | s/f of 30\\"x36\\"x10 \\" no 16/18 SWG sheet metal for main 125 amp panel board having 125 A FP Incomer, 125 A ChangeOver and , 160A electrolyte cu bus bar as outgoing with three nos led indicator and as per the direction of site engineer in charge.(Make-Legrand/Havells/L&T/Equivalent) Please Enable Macros to View BoQ information |
