|
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. DSR 15.7.4 |
| 2 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured):. In cement mortar. DSR 15.8.4 |
| 3 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 (Using New Bricks) |
| 4 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand) (using Old Bricks) |
| 5 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) DSR 13.1.1 |
| 6 | Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand):Flush / Ruled/ Struck or weathered pointing DSR 13.31.1 |
| 7 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31 |
| 8 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels: Granite stone slab colour black, Cherry/Ruby red: Area of slab over 0.50 sqm DSR 8.2.2.2 |
| 9 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick DSR 11.26.1 |
| 10 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete .Size of Tile 600x600 mm. DSR 11.41.2 |
| 11 | Providing and fixing wall lining facing with brick tile (Thickness as provided by the manufactureres specifications) having 10mm deep & 10mm wide horizontal & vertical staggered joints and to be fixed over brick/RCC wall, beam, slab etc. with 12mm thick cement plaster 1:3 (1cement:3 coarse sand). The joints shall be properly recessed and finished. The tiles in corner shall have recessed joint by overlapping one tile of one side over another tile from apposite side of wall. The complete work shall be executed upto five floor level as per Arch drg and to the entire satisfaction of the Engineer-in-charge |
| 12 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in- charge. DSR 15.57 |
| 13 | WOODEN GROOVED ACOUSTICAL SLATS :- Providing and fixing wood-based acoustic panels with linear perforations of approved make, as approved by the Engineer-in-Charge. The panels shall be Non-FR grade melamine laminated panels of size 2440 mm × 128 mm × 15 mm, having 2 mm grooves at 15 mm pitch, with tongue and groove edges for seamless installation, and a minimum density of 800 kg/m³. The back of the panels shall be perforated with 10 mm diameter circular holes, provided with a 0.2 mm thick non-woven acoustic fabric backing for sound absorption. The panels shall be fixed over an 18-gauge GI framework, spaced at 600 mm centres, using suitable brackets and fasteners. The cavity within the framework shall be filled with 25 mm thick rock wool insulation of 24 kg/m³ density, properly placed to ensure acoustic performance where required and shall include all necessary accessories, fixtures, and fittings. The panelling work shall be executed in proper alignment, line, and level, to the complete satisfaction of the Engineer-in-Charge, for all heights and levels, complete in all respects, as per directions of the Engineer-in-Charge. |
| 14 | Refixing of Wooden Groved Acoustic Slats shall be fixed over an 18-gauge GI framework, spaced at 600 mm centres, using suitable brackets and fasteners. The cavity within the framework shall be filled with 25 mm thick old rock wool insulation, properly placed to ensure acoustic performance where required and shall include all necessary accessories, fixtures, and fittings. The panelling work shall be executed in proper alignment, line, and level, to the complete satisfaction of the Engineer-in-Charge, for all heights and levels, complete in all respects, as per directions of the Engineer-in-Charge. |
| 15 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. DSR 9.76 |
| 16 | Providing and fixing glazing in aluminium/UPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge : With toughened glass panes of required patterened of 6.0 mm thickness. |
| 17 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR 13.91 |
| 18 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer- in- Charge. With cement mortar 1:4 (1 cement : 4 fine sand) DSR 14.1.1 |
| 19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 |
| 20 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats). DSR 13.90.1 |
| 21 | Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).DSR 13.46.1 |
| 22 | Finishing Polyurethane polishing (PU) on wood work (one or more coat). |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. DSR 13.99.1 |
| 24 | Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. DSR 8.6 |
| 25 | Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. DSR 15.19 |
| 26 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. :Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). DSR 15.2.1 |
| 27 | Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc. DSR 4.3.2 |
| 28 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) DSR 4.1.2 Please Enable Macros to View BoQ information |
