|
| 1 | Earth work narrow excavation for foundation in all soils and sub soils and to full depth as may be directed except hard rock requiring blasting inclusive of shoring, shuttering and baling out water where ever necessary, refilling the sides of foundations with excabvated earth in layers of not more than 15cm thk watered, well rammed , consolidated and depositing the surplus earth on bank with initial lead of 10m and initial lift of 2m, clearing and leveling the site etc., complete as directed by the federation officers and as per standard specifications. |
| 2 | Supplying and filling with M-Sand in layers of not more than 15cm thick, well rammed, watered and consolidated etc., complete complying with standard specifications and as directed by the departmental officers. |
| 3 | Plain Cement Concrete 1:4:8 (One Cement, Four M-sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering for flooring and foundation and including side shuttering, compaction, curing etc., complete as directed by the departmental officers. |
| 4 | Supplying and filling with gravel for foundation and basement in layers of not more than 15 cm thick well rammed, watered and consolidated etc to required thickness, etc., completed as directed by the departmental officers. |
| 5 | Supplying , erection and steel centering for all RCC works using M.S Sheet, M.S. angles casurina props C.W.joints for all type of RCC works (ie) beams, roof slab, lintel, column footing, column & roof beam etc., including necessary supports with all cross bracing, filling the slits and holes the reprieved materials should be taken by the contractor and side shuttering etc., complete as directed by the departmental officers - Plain surface- Up to basement |
| 6 | Column surface- Up to basement |
| 7 | Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 360 kglcum and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (M 25) For Foundation and Basement |
| 8 | For Superstructure in 0 - 4.5m level |
| 9 | Supplying, fabricating and placing in position of reinforcement, grills for all RCC works including cost of steel and binding wire , cutting and tying etc., complete by the departmental officers. using RTS rods in all floors.(Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 10 | Brick work in Cement Mortar 1:5 using best quality Fly ash bricks of size 23x11x7cm for foundation and basement to line, level and to plumb on one face including necessary scaffolding, racking out joints, curing etc., complete as directed by the departmental officer and as per standard specification - upto Basement |
| 11 | For Superstructure- 4.5m to 9.00 m Lvl |
| 12 | Plastering the surface of walls with Cement Mortar 1:5 (One cement and Three m-sand), 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 13 | Supplying and painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint (exterior) of first class quality and of approved color over one coat of priming coat including priming coat and also make good of the surface with sand paper, putty, scaffolding etc., complete as directed by the departmental officers. |
| 14 | Supplying and fixing mild steel of MS truss and Purlins using \\"L\\" angle / tubler section for truss, straps etc., including cutting, welding, threading including painting etc., complete. |
| 15 | Supplying and fixing in position of Powder coated galvalume colour sheet of 0.47mm thickness with necessary bolts, nuts and washers, metal screws etc. complete with standard specification and as directed by the departmental officers. |
| 16 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete as directed by the departmental officials. |
| 17 | Supply and fixing of Air extractor for roof top including all necessary fittings etc.Complete as directed by the federation officers |
| 18 | Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five m-sand] using best quality of second class Ground Moulded Chamber Burnt Bricks of size 9\\" x 41/5\\" x 3\\"with Plastering with Cement Mortar 1:3 [One Cement and Three M-Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three M-Sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification Clear size 0.60 x 0.60 m |
| 19 | Supplying and fixing mild steel for iron grill for truss straps (wrought & fixed) etc., including cutting, welding, threading including painting , hoisting charges etc., complete as per the standard specifications |
| 20 | Supplying and filling 40mm gauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc complete as per standard specifcations |
| 21 | Supply and fixing of Chain link fencing of Size 2''x 2'' using 10 gauge galvanised iron wire including cost of conveyance and fixing labour charges etc complete as directed by the departmental officers . |
| 22 | Paving the floor with best quality Endura acid & Alkali resistant tiles 300x300mm & 120mm Thick(Jhonson) of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three m-sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 23 | Supplying and fabricating in position of SS 304 grade 1.6mm thickness SS rectangular Grates (Size 0.45 x 1.00m) including side frame if any required, Installation, finishing and conceyance, laboubor cost etc complete specification. |
| 24 | Supplying and fixing in position best quality UPVC soll/waste pipes of various dia having 6 kg/sq.cm. pressure BIS mark and providing leak proof joints using UPVC adhesives including fixing to the wall with special UPVC/MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The UPVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level (150mm dia) |
| 25 | Supplying and fixing in position UPVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the UPVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion. to original condition etc., complete complying with standard specifications. (The UPVC specials should be got approved by the Executive Engineer before use on works- Upvc elbow 150 mm dia |
| 26 | Upvc elbow 150 mm dia |
| 27 | Bend 150mm dia |
| 28 | Supplying and fixing in position of Polycarbonate sheet of 6mm thickness with necessary bolts, nuts and washers, metal screws etc. complete with standard specification and as directed by the departmental officers. |
| 29 | GST (Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.) Please Enable Macros to View BoQ information |
