|
| 1 | GROUND FLOOR |
| 2 | Earth work excavation in foundation in Hard of soil including hard moorum, stoney earth mixed with boulders ( except sheet rocks and boulders requiring blasting) with all leads and lifts including rough dressing the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P required for the work complete as per direction of the Engineer-in-charge. |
| 3 | Supplying, filling in foundation and plinth with sand in layers well watered and rammed including cost, conveyance, royalty of all the materials required for the work labour with T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge. |
| 4 | Cement Concrete (1:3:6) in foundation and floors using 4cm size black broken granite aggregates of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceding 15cm (6\\") thick to the required level ramming, watering, curing etc. complete including cost and conveyance royalty, taxes of all materials and labour with T&P required for the work etc. complete as per direction of the Engineer in charge. |
| 5 | Cement concrete (1:2:4) with 12mm. Size hard broken granite chips (Crusher broken) including all cost, conveyance , royality etc. complete. |
| 6 | RCC work of M 20 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying. 1st footing |
| 7 | column up to Plinth Beam Level |
| 8 | Plinth Beam |
| 9 | Column |
| 10 | Roof Beam |
| 11 | Lintel |
| 12 | Roof Slab |
| 13 | Stair Case |
| 14 | Chaja |
| 15 | Fins Wndow |
| 16 | Providing HYSD bars including cutting, bending, binding and tying the grills and placing in position including cost, conveyance and royalty of all materials and cost of all labour etc. complete |
| 17 | Fly ash Brick masonary with C.M (1:6) in foundation and plinth including cost ,conveyance, royalty & taxex of all materials, labour, T&P etc. complete including watering and curing for required period as per the direction of the Engineer in charge. |
| 18 | Fly ash Brick masonary with C.M (1:6) in Superstructure including cost ,conveyance, royalty & taxex of all materials, labour, T&P etc. complete including watering and curing for required period as per the direction of the Engineer in charge. |
| 19 | 20mm th Cement plaster in C.M (1:4) including punning over walls, finished smooth including watering curing and scaffolding with cost, conveyance, royalty, taxes of all the |
| 20 | Coal taring two coats including cost of coal tar and tar paper with all cost, conveyance, labour, T&P and cess etc. complete as per specifications and direction of the Engineer-in-charge |
| 21 | 16mm thick inside Plastering with cement mortar(1:6) including all cost and conveyance, royalty, taxes of all materials etc. complete as directed by the Engineer in Charge. |
| 22 | 12mm thick outside Plastering with cement mortar (1:6) including all cost and conveyance, royalty, taxes of all materials etc. complete as directed by the Engineer in Charge. |
| 23 | Supplying, fitting and fixing of Vetrified tile of size 60cm x 60cm in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge. |
| 24 | Supplying, fitting and fixing of Vitrified tile (In dados / skirting) of premium grade having thickness 8mm to 10mm conforming to IS 13756 of size 60cm x 60cm plain (Ivory) in floors with application of polymer modified cement based water resistance adhesive bed of required thickness of 10 mm and filling joints with epoxy grout of approved quality including cost of all materials, labour, T&P, taxes etc. complete required for the work as per direction of the Engineer-in-charge. |
| 25 | Providing and fixing Kadappa tiles (upto 0.10 Sqm.) in dados, skirtings and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 26 | Fixing chequred tiles in floors, treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 27 | Finishing walls with weather seal coat (two coats) over a coat of cement primer to outer walls surface including cost and conveyance of all materials to site, and all labour charges complete as per direction of Engineer in Charge. |
| 28 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint. |
| 29 | Finishing wall surface of wall with Acrylic Wall Putty (Water based) of approved make and finished smooth and even surface to receive painting including cost conveyance and royalties of all materials etc complete as per direction of the Engineer in Charge. |
| 30 | Providing, fitting and fixing of 32 mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all fittings and fixtures etc. Complete. |
| 31 | Providing & Fixing of M.S. window Grills including cost and conveyance of all materials to site, and all labour charges etc complet as per direction of E.I.C. |
| 32 | Supplying, fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 33 | Painting two coats over wood and iron work with approved Enamel paint over a coat of priming including cost and conveyance of all materials to site and all labour charges complete as per direction of E.I.C. |
| 34 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect. |
| 35 | Providing fitting fixing of RCC ventilator of size 0.45 m X 0.30 m including all cost conveyance etc. completed. |
| 36 | Providing and applying of pre contructional antitermite treatment by drilling 12 mm dia holes at distance of 30 cm @ junction wall & floors about 300 mm apart deep enough to reach the soil below & chemical emulsion ( PREMISE,IMIDACHLOPRIED30.5SC OF BAYER MAKE mixed with 47.5 ltrs water) pumped these holes to soak the soil @ 1 Ltr solution of each hole as per manufactures specification & the holes should be pluged the filling materials including cost of all materials,labour,conveyance,T&P,all taxes and hire charges of machinaries as per direction of Engineer-in-charge. |
| 37 | TERRACE FLOOR RCC work of M 20 grade with 20 mm and down grade black hard granite (Crusher broken) stone chips including hoisting and laying. |
| 38 | Column |
| 39 | Roof Beam |
| 40 | Providing HYSD bars including cutting, bending, binding and tying the grills and placing in position including cost, conveyance and royalty of all materials and cost of all labour etc. complete |
| 41 | Fly ash Brick masonary with C.M (1:6) in Superstructure including cost ,conveyance, royalty & taxex of all materials, labour, T&P etc. complete including watering and curing for required period as per the direction of the Engineer in charge. |
| 42 | 2.5 cm. thick grading concrete (1:2:2) on roof slab with 6mm. size hard granite chips on new work. |
| 43 | 16mm thick inside Plastering with cement mortar(1:6) including all cost and conveyance, royalty, taxes of all materials etc. complete as directed by the Engineer in Charge. |
| 44 | 12mm thick outside Plastering with cement mortar (1:6) including all cost and conveyance, royalty, taxes of all materials etc. complete as directed by the Engineer in Charge. |
| 45 | Finishing walls with weather seal coat (two coats) over a coat of cement primer to outer walls surface including cost and conveyance of all materials to site, and all labour charges complete as per direction of Engineer in Charge. |
| 46 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint. |
| 47 | Providing & Fixing of M.S. window Grills including cost and conveyance of all materials to site, and all labour charges etc complet as per direction of E.I.C. |
| 48 | Painting two coats over wood and iron work with approved Enamel paint over a coat of priming including cost and conveyance of all materials to site and all labour charges complete as per direction of E.I.C. |
| 49 | Providing and fixing rain water down pipe with necessary bend shoes and heads including cost of 75mm dia earthen pipe, clamps and nails etc. with all cost, conveyance, taxes of all the materials required for the work with all labour, T&P and cess etc. complete in all respect as per specification and direction of the Engineer-in-charge |
| 50 | Construction of Approach Road Earth work in Hard soil within 50m initial lead and 1.5m initial lift including dressing & levelling of the bed etc complete as per direction of the Engineer-in-charge. |
| 51 | Filling foundation and plinth with sand and wel watered & rammed etc . Complete including cost of sand . |
| 52 | Cement concrete (1:4:8) with 4mm. Size Crusher broken hard granite Metal including cost, conveyance, royality etc. complete. |
| 53 | Cement concrete (1:1.5:3) with 12mm. Size hard broken granite chips (Crusher broken) for R.C.C. works including hoisting, laying, all cost, conveyance, royality etc. complete. |
| 54 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismentalingthen after casting including cost of materials complete. |
| 55 | Brick work with Fly ash Bricks (25cmx12cmx8cm) having crushing strength not less than 75kg/cm2 in C.M (1:6) foundation and plinth including cost,conveyance, royalities of all materials etc all complete. |
| 56 | 16mm thick cement plaster (1:6) for brick or work brick masonry including cost, conveyance, royalty of all materials etc. complete as directed by the Engineer in Charge. |
| 57 | Filling foundation and plinth with excavated materials including watering & ramming as directed by the Engineer in Charge. |
| 58 | Internal Electrification Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on modular GI box with modular base & cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (MAKE- HAVELLS / KEI/ FINOLEX/ ANCHOR) GROUP A |
| 59 | GROUP B |
| 60 | GROUP C |
| 61 | Recessed wiring to 5A /6Amp socket outlet with 2 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20mm dia non metallic PVC flexible conduit with Modular type switch, Phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 X 1.5sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required (MAKE- HAVELLS / KEI/ FINOLEX/ ANCHOR) Separate |
| 62 | Supply and fixing of 6Amp switch on existing board (Modular type) (Make of wire -Finolex/ L&T/ Anchor-Roma/ Havells-Creftree/ Legrand/ Seimens) |
| 63 | Supply and fixing of 6Amp plug on existing board (Modular type) (Make of wire -Finolex/ L&T/ Anchor-Roma/ Havells-Creftree/ Legrand/ Seimens) |
| 64 | Supply and fixing of 16Amp plug point on modular metal box base and cover with all connections (Make of wire -Finolex/ L&T/ Anchor-Roma/ Havells-Creftree/ Legrand/ Seimens) |
| 65 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (MAKE- HAVELLS / KEI/ FINOLEX/ ANCHOR) 2 X 2.5sq. mm + 1 X1.5sq. mm |
| 66 | 2 x 4.0 sq.mm + 1 x 1.5 sq.mm |
| 67 | INVERTER WIRING with 1.5sqmm PVC S/C multistrand Copper wire |
| 68 | S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose . |
| 69 | Call bell push Modular type |
| 70 | Supply and fixing of Modular fan regulator(Craftree/ Anchor/Legrand/ Seimens) |
| 71 | Supply and fixing Earthing with copper earth plate 600 mm X 600 mm X 3.15 mm thick ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc (But without charcoal and salt) as required. |
| 72 | Extra for using salt and charcoal for GI or copper plate earth as required (Cost for set) |
| 73 | Supplying and laying 25mm X 5mm G.I strip on surface or in recess for connection etc as required. |
| 74 | Supply and fixing of Inverter Point consisting of 32Amp Male, Female socket & Top with 6Amp with all connection complete in all respect as per direction of Engineer in charge (Cona / Anchore / Havels / HPL ) |
| 75 | Supplying and fixing of (AC Point) metal box of Modular G.I box for 6 module 18 SWG on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing3 pin 15 / 16 amps modular socket outlet and 15 / 16 amps modular type switch, connection, painting etc as required. (For light plugs to be used in non residential buildings) |
| 76 | Supplying and fixing of (Computer Board) 2 nos 6 Amp Plug point 3 nos switch, 1 No 15 Amp Switch & 1 No 15 Amp Socket Modular type on modular metal box, base & cover with all connections |
| 77 | C Curve SP MCB 240/410V 6-32A (MAKE Legrand model DX3 MCB or its equivalent to Hager/ scheinder / Siemens ) |
| 78 | Supply & Fixing of 20Watt LED Tubet light (Make-Bajaj/ Philips /Crompton/ Havells/ Wipro/ Halonix/ Panasonic) |
| 79 | Supply and fixing of A.C Ceiling fan 48\\" size 1star rating, Wind Speed 350 Rpm, Air Delivery Density 225M3/ Sec with 100% copper winding. (Make-Polycab -Vital / Crompton -Jura/ Havells-Velocity/ Usha-striker etc). |
| 80 | Supply and fixing of Exhaust fan 9\\"/10\\" size with making hole of required size. (Make-Havells/ Usha/ Almonard/ Orient/ Crompton/ Usha or equivalent). |
| 81 | Supply and fixing of 15 W LED bulb (Make-Bajaj/ Philips / Crompton/ Havells/ Wipro/ Halonix/ Panasonic) |
| 82 | Surface light fitting-INTEGRA (Surface) slim,energy efficient ,glare free,round LED down lighter ideally suited for low ceilling area15WLED 3000K(Philips/Hacvells) |
| 83 | Supply & Fixing of 90Watt LED street light (Make-Bajaj/ Philips /Crompton/ Havells) |
| 84 | P.H Work Supplying all materials , labour and T&P and providing and fixing chlorinated Polyvinyl chloride ( CPVC ) pipes confirming to IS :15778, having thermal stability fo hot and cold water supply including CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.0 m spacing . This includes jointing of pipes and fittings with one step cpvc solvent cement and testing of joints complete as per direction of E-I-C. 20mm dia C-PVC pipe |
| 85 | 25mm dia CPVC pipe |
| 86 | Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. (a)250mm thick wall |
| 87 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. |
| 88 | Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15 mm dia CP LB Bib cock with flange (Jacquar Make) |
| 89 | 15 mm dia CP Two way Bib cock with flange (Jaquar Make) |
| 90 | 15mm dia CP angle stop cock with flange(Jaquar Make) |
| 91 | 20mm dia CP concealed stop cock with flange(Jaquar Make) |
| 92 | 15mm dia CP revolving shower with CP shower arm(jaquar make) |
| 93 | 15mm CP Health fucet |
| 94 | 25mm dia brass or gun metal fullway valve.(Shakti make) |
| 95 | 40mm dia brass or gun metal fullway valve.(Shakti make) |
| 96 | 15mm dia CP extension piece |
| 97 | 20mmx600mm long CP towel rail(Jaquar make) |
| 98 | CP towel ring(Jaquar make) |
| 99 | CP soap holder (jaquar make) |
| 100 | Acrylic shelf |
| 101 | 600mmx450mm B.E.Mirror |
| 102 | 125 CP grating |
| 103 | Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge(a)250mm to 375mm thick wall |
| 104 | Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 litres capacity pvc low level cistern (Slimline-white) |
| 105 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in chargeEuropian water closet with 'S' trap plain(Parryware/Cera make ) |
| 106 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge Eropian water closet with Cascade model (Hind ware,Parry ware make) |
| 107 | 110mm U-PVC pipe(Supreme/Asirbad make) |
| 108 | 110mm U-PVC plain Tee (Supreme/Ori Plast Make) |
| 109 | 110mm U-PVC door bend (Supreme/Ori Plast Make) |
| 110 | 110mm U-PVC plain bend (Supreme/Ori Plast Make) |
| 111 | 110mm dia U-PVC offset without ear |
| 112 | 110mm dia U-PVC 'P' trap (Supreme/Ori Plast Make) |
| 113 | 110mm dia U-PVC cowl (Supreme/Ori Plast Make) |
| 114 | 110mm dia u-pvc clamp |
| 115 | 125mm dia CP grating |
| 116 | Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing plaza pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. 550mmsize W.H.Basin with Pillar Cock(Hind ware,Paerryware) |
| 117 | External work Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm &(Back of building) |
| 118 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. 0.91m dia x 2.10m deep soakway pit |
| 119 | Supplying fitting and fixing of rotational moulded polythene cylindrical vertical water storage tanks confirming to IS :12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts , fixing ball valve etc , including hoisting upto a height upto a height of 5 meters above ground level and placing the tank to the required position etc all complete as per specification direction of the E-I-C 2000 ltr sintex tank |
| 120 | 30 users Septic tank Earth work excavation in foundation in Hard of soil including hard moorum, stoney earth mixed with boulders ( except sheet rocks and boulders requiring blasting) with all leads and lifts including rough dressing the bed and depositing the excavated earth at places away from work site with all leads and lifts including cost of all labour and T&P required for the work complete as per direction of the Engineer-in-charge. 1 x 2.8 x1.7m x 1.50 |
| 121 | Below 1.5 m |
| 122 | Supplying all materials, labor T&P providing CC (1:3:6) with 4 cm HG metal including watering curing lead of all materials to site etc. complete. |
| 123 | Supplying all labor T&P & Providing C.C. (1:2:4) with 12mm size broken hard granite chips including watering curing & lead of all materials to site etc. all complete. |
| 124 | Supplying all materials, T&P and providing MS reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauges. 1.013cum x 2,5 x 35.32 =89.44 say Rs- |
| 125 | Supplying all materials labour T&P and providing Fly ash brick work in CM (1:3) in foundation and plinth including watering and curing and lead of materials to site. |
| 126 | Supplying all materials labour T&P and providing 12mm thick C.P (1:4) including watering curing and conveyance of all materials to site. |
| 127 | Supplying all materials labour T&P and providing 12mm thick C.P (1:3) including watering curing and conveyance of all materials to site. |
| 128 | Supplying all materials labour T&P and providing cement punning including watering curing and conveyance of all materials to site.same as plastering |
| 129 | Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. |
| 130 | Supplying all materials, labour T&P for providing fitting & fixing 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. |
| 131 | 100 mm dia SW pipe |
| 132 | SW bend |
| 133 | PVC venting pipe |
| 134 | 100 mm dia CI cowlat top of venting pipe Please Enable Macros to View BoQ information |
