|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within all lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)including carriage of materials within all leads and lifts. |
| 2 | Dismantling tiled floors laid in mortar upto all floor level including stacking of serviceable materials an disposal of un-serviceable materials within all leads (wooden/concrete joists to be measured and pai for separately) For all thickness of tiles 25mm and upto 40mm including carriage of materials in aleads and lifts. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement: 3 coarse sand): 6 graded stone aggregate 20 mm nominal size) |
| 4 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) |
| 5 | Providing and laying ceremic floor tiles of approved size, shade,design and quality in flooring, treads of steps and landing laid on a bed of 20mm thick cement mortar 1:4 (1 cement: 4 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete including carriage of materials in all leads and lifts. |
| 6 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 7 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.(i) Concealed work, including cutting chases and making good the walls etc.(a) 20 mm nominal outer dia Pipes |
| 8 | Providing and fixing P.V.C. floor trap 110 X 90 mm dia including carriage of materials within all leads and lifts. |
| 9 | Providing and fixing C.P. grating 100mm round including carriage of materials upto all leads and lifts and as directed by the Engineer in Charge. |
| 10 | Providing and fixing Jaguar Make angle cock 15mm (fifteen millimetre) nominal bore including carriage of materials within all leads and lifts. |
| 11 | Providing and fixing Jaguar Make bib cock including carriage of materials within all leads and lifts. |
| 12 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge including carriage of materials within all leads and lifts. |
| 13 | Providing and fixing wash basin with C.I. brackets, of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm . |
| 14 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.including carriage of materials within all leads and lifts. |
| 15 | Providing and fixing over head shawer with all accessery including carriage of material in all leads and lifts.Jagwar make including shawer arm.complete fittings SHA 1215 F |
| 16 | Providing and fixing C.P. / S.S. health faucit with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-charge .including carriage of materials within all leads and lifts. |
| 17 | Providing and fixing Three in one Acrylic corner including carriage of materials within all leads and lifts. |
| 18 | Providing and fixing C.Psoap dish including carriage of materials within all leads and lifts. |
| 19 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia |
| 20 | Providing and fixing 0.63 mm Thick PGI. Sheet in lining/ceiling with necessary screws/nuts & bolts/ nails and fixed on wooden /steel frame work complete as per direction of Engineer-in- charge (Frame work shall be paid for separately) including carriage of materials within all leads and lifts. |
| 21 | Providing and fixing wooden beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete Second Class wood 40x12 mm (base and height) including carriage of materials in all leads and lifts. |
| 22 | Providing and fixing towel ring of Jaguar make CAN 1121 BN ncluding carriage of materials within all leads and lifts. |
| 23 | Providing and fixing towel Rod of Jaguar make CAN 1101 S ncluding carriage of materials within all leads and lifts. |
| 24 | Providing and fixing CP Extention nipple EN 10 including carriage of materials within all leads and lifts. |
| 25 | Providing and fixing C.P flange including carriage of materials within all leads and lifts. |
| 26 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. including carriage of materials within all leads and lifts. |
| 27 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per the direction of the Engineer-in-Charge including carriage of materials within all leads and lifts. |
| 28 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:(i)One or more coats on old work including carriage of materials within all leads and lifts |
| 29 | Painting onWood work with Deluxe Multi Surface Paint of required shade. one or more coat of approved brand and manufacture |
| 30 | Polishing One or more coat with malamine polish of required shade on Old wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts. One or more coat on Old works |
| 31 | Disposal of moorum/ building rubbish/ malba. Similar unserviceable , dismantled or waste material by mechanical transport including loading, Transporting, unloading to approved Monicipal dumping ground for lead upto 10km. Foe lalleafts, complete as per dierection of Engineer- in Charge.Note:-Item to be applicable in urban area having directions for restricted hours movement/ plying of load carring motor vehicle of 3.5 cum. or More. Please Enable Macros to View BoQ information |
