|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within all lead as per direction of Engineer - in - charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)including carriage of materials within all leads and lifts. |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all lead. For thickness of tiles 10 mm to 25 mm. complete including carriage of materials within all leads and lifts as per direction of Engineer - in - charge. |
| 4 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Thickness above 10 mm up to 25 mm |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) complete including carriage of materials in all leads and lifts |
| 6 | Precast plain chequered tiles hydraulic compressed 22 mm thick NTC or equivalent Make laid in open ground,floors, treads of steps and landings etc. on a bed of 25 mm average thickness of cement mortar 1:4 (1 cement :4 sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) complete with tiles of medium shades.including carriage of materials within all leads and lifts. |
| 7 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.(i) 1.00 mm thick |
| 8 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m² |
| 9 | Providing and fixing 0.63 mm thick PGI sheet ceiling/lining of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts |
| 10 | Providing and fixing 0.60 mm thick prepainted steel sheet Tata Durashine or equivelant in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials upto all leads and lifts. |
| 11 | Providing and fixing 2 mm thick Polycarbonate Transparent sheet plain lining with necessary screws/nuts & bolts/ nails, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). |
| 12 | Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.40mm thick.2nd class Deodar wood. |
| 13 | Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 40mm thick 2nd class deodar wood. |
| 14 | Providing and fixing 6 mm thick ply wood ceiling/lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) inclding carriage of materials within all leads and lifts. |
| 15 | Providing and fixing 9mm thick commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separately) complete including carriage of materials within all leads and lifts. |
| 16 | Providing and fixing 12mm thick imported pine wood ceiling/ panneling with tongued and grooved jointing of standard quality ISI mark and approved shade and colour complete including carriage of material within all leads and lifts. |
| 17 | Providing and fixing wood square edged cover fillets (beading ) 40 X 12 mm section with wood screws in ceiling and lining including mitring at junctions incliding carriage of material in all leads and lifts |
| 18 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of materials within all leads and lifts. 250x16 mm |
| 19 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :- (i) 150x10 mm |
| 20 | Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. A) 125 mm |
| 21 | Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete including carriage of material within all leads and lifts. |
| 22 | Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete including carriage of material within all leads and lifts. |
| 23 | Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts. |
| 24 | Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete. 1st class deodar wood. |
| 25 | Providing and fixing bright finished brass handles with screws etc. complete i) 100mm |
| 26 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters etc. including fixing with necessary screws etc. complete including carriage of materials in all leads and lifts |
| 27 | Providing and fixing square edged cover fillets (beading) 19x6mm section including mitring at junction with wooden screws / nails etc complete of hard wood including carriage of material in all leads and lifts |
| 28 | Removing dry or oil bound distemper water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete including carriage of materials in all leads and lifts. |
| 29 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth completeincluding carriage of materials within all leads and lifts. |
| 30 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge |
| 31 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm of approved brand and manufacture including carriage of materials within all leads and lifts. |
| 32 | Polishing two coats with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler.complete including carriage of materials within all leads and lifts. |
| 33 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 0.90 ltr/10 sqm) complete including carriage of materials in all leads and lifts |
| 34 | Providing scaffolding for all kind of works in multistorey buildings up to all height with Bamboo complete tied with rope on joints and pedistal of CGI Sheet etc. in all respect (Face area of scafolding up to top pedestal height shall be measured and paid for) including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge. |
| 35 | Painting wood work with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work complete including carriage of materials within all leads and lifts. |
| 36 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.One or more coats |
| 37 | Finishing walls with Acrylic Smooth (Apex Ultima) exterior paint of required shade : Old work (One or more coat applied complete including priming coat of exterior primer applied inlcuding carriage of materials in all leads and lifts |
| 38 | Painting with synthetic enamel paint on wood of approved brand and manufacture of required colour to give an even shade One or more coats on old work |
| 39 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade complete including carriage of materials within all leads and lifts: one or more coat on old work |
| 40 | Providing and fixing Ess-Ess Curtain rod 25mm dia with brackets,end firnels and required number of curtain rings with screws etc.complete including carriage of material in all leads and lifts and as per the direction of the Engineer-in-Charge. |
| 41 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. |
| 42 | Providing and fixing single hole wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps . |
| 43 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.including carriage of material within all leads and lifts. |
| 44 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets andstainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :610x510 mm bowl depth 200 in kitchen including carriage of material within all leads and lifts. |
| 45 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 46 | Providing and Fixing PVC corner shelves 3-in-1single piece of complete including carriage of materials within all leads and lifts |
| 47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes Concealed work, including cutting chases and making good the walls etc. |
| 48 | Providing and fixing white vitreous china One Piece Sheet with seat and lid, 10 litre low level white flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : including carriage of materials within all leads and lifts.(i) W.C. pan with ISI marked white solid plastic seat and lid |
| 49 | Providing and fixing C.P. brass Hand Jet including carriage of materials within all leads and lifts. |
| 50 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :(i) White solid plastic seat with lid |
| 51 | Providing and fixing bright finished hydraulic door closer of Godrej make or equivalant with screws etc. complete including carriage of materials in all leads and lifts. |
| 52 | Providing and fixing C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 53 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 54 | Providing and fixing chequered steel plates of required thicness including cutting welding complete in flooring over steel frame work to be paid seperatly). including carriage of materials in all leads and lifts. As per direction of Engineer-in charge. |
| 55 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 56 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.(i) Granite work/ Marble work |
| 57 | Providing and fixing MS BP sheet 2.00mm thick in eves board / fascia / soffits / ceilin including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (base members of steel work shall be measured and paid separately) as directed by the Engineer-in-Charge including carriage of materials in all leads and lifts. |
| 58 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete including carriage of materials within all leads and lifts. 250x16 mm |
| 59 | Providing and fixing oxidized single acting Door spring with necessary screws etc. complete. 150 mm |
| 60 | Providing and fixing oxidized M.S. hasps and stapple for cup board 90 mm size with necessary screws etc complete. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. |
| 61 | Providing and layingl vitrified floor tiles /planks (600 X 600 )in different sizes(thickness to be specifiedby the manufacturer) withwater absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid in 20mm thick cement mortar 1:4 (1 cement : 4 coarsesand), jointing with greycement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete |
| 62 | Providing and laying Vitrified tiles in any size (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. |
| 63 | Providing and layingl vitrified floor tiles (600 X 600 )in different sizes(thickness to be specifiedby the manufacturer) withwater absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid in 20mm thick cement mortar 1:4 (1 cement : 4 coarsesand), jointing with greycement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete |
| 64 | Providing and laying 1st quality ceremic glazed wall tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete .300mmx450mm. |
| 65 | White glazed tiles 6mm thick of approved size, shade and design in skirting risers of steps and dado 12mm (Twelve milimetre) thick cement mortar 1:3(One cement is to Three Sand) and jointed with cement slurry size including carriage of matirial. |
| 66 | Providing and fixing high pressure Type B PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc.Type B in all leads and lifts as desired by Engineer in Charge. Complete.150 mm dia |
| 67 | Providing and fixing high pressure Type B PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc.Type B in all leads and lifts as desired by Engineer in Charge. Complete.110mm dia |
| 68 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. 75mm dia Type B complete including carriage of materials within all leads and lifts |
| 69 | Providing and fixing 150mm dia PVC Finolex collars ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts.nominal size 150 |
| 70 | Providing and fixing 110 nominal size PVC FINOLEX plain bend ISI marked ISI marked including fixing with approved adhesive etc complete.110 mm dia |
| 71 | Providing and fixing 75mm nominal size PVC FINOLEX plain bend ISI marked ISI marked including fixing with approved adhesive etc complete. 75 mm dia |
| 72 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc complete in all leads and lifts as desired by Engineer in Charge. complete. 150mm |
| 73 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc complete including carriage of materials in all leads and lift as per direction of Engineer in Charge. . 110 mm dia |
| 74 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc complete. 75 mm dia Type B complete including carriage of materials within all leads and lifts |
| 75 | Providing and fixing PVC Finolex Door bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- (i) 150mm dia. |
| 76 | Providing and fixing PVC Finolex Door bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- (i) 110mm dia. |
| 77 | Providing and fixing PVC Finolex Door bend ISI marked including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts:- (i) 75mm dia. |
| 78 | Providing and fixing PVC single equal branch plain ISI marked etc complete including carriage of material within all leads and lifts. 150 mm dia |
| 79 | Providing and fixing PVC single equal branch plain ISI marked etc complete including carriage of material within all leads and lifts. 110 mm dia |
| 80 | Providing and fixing PVC single equal branch plain ISI marked etc complete including carriage of material within all leads and lifts. 75 mm dia |
| 81 | Providing and Fixing PVC floor trap ISI marked of self cleansing design complete 110mmx90mm complete including carriage of material within all leads and lifts and as per the direction of the Engineer-in-Charge |
| 82 | Providing and fixing C.P. brass two in one angle cock 15mm (fifteen millimetre) nominal bore including carriage of materials within all leads and lifts. |
| 83 | Providing and fixing 15mm nominal bore C.P. brass Sink mixer of ESS Ess conforming to IS:complete including carriage of materials within all leads and lifts. |
| 84 | Providing and fixing wash basin with C.I. brackets, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm |
| 85 | Providing and fixing 15mm nominal bore C.P. brass Sink mixer of ESS Ess conforming to IS:complete including carriage of materials within all leads and lifts. |
| 86 | Providing and fixing C.P. brass angle cock 15mm (fifteen millimetre) nominal bore including carriage of materials within all leads and lifts. |
| 87 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour:-15mm nominal bore with 45cm length. |
| 88 | Providing and fixing uplasticised PVC connection pipe: 60 cm length 15 mm nominal bore viking made including carriage of materials within all leads and lifts. |
| 89 | Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete including carriage within all leads, lifts of materials and other incidentals |
| 90 | Providing and Fixing Acrylic Corner With 3 Nos Shelves including fittings complete .including carriage of materials within all leads and lifts. |
| 91 | Providing and fixing 15mm dia C.P.brass Bib cock of approved quality including carriage of materials within all leads and lifts. |
| 92 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 600mm x 610mmx 450mm internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 Fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: (i). Inside dimensions 800x 800mm and 60cm deep for pipe line with three or more inlets : With common burnt clay F.P.S. (non modular) bricks of class designation 7.50 |
| 93 | Disposal of moorum/ building rubbish/ malba. Similar unserviceable , dismantled or waste material by mechanical transport including loading, Transporting, unloading to approved Monicipal dumping ground for lead upto 10km. Foe lalleafts, complete as per dierection of Engineer- in Charge.Note:-Item to be applicable in urban area having directions for restricted hours movement/ plying of load carring motor vehicle of 3.5 cum. or More. |
| 94 | Providing scaffolding for all kind of works in multistorey buildings up to all height with Bamboo complete tied with rope on joints and pedistal of CGI Sheet etc. in all respect (Face area of scafolding up to top pedestal height shall be measured and paid for) including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge. |
| 95 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 96 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe 32 mm |
| 97 | Providing and fixing C.P. gratings including carriage of materials within all leads and lifts :-100 mm dia |
| 98 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand). including carriage of materials in all leads and lifts |
| 99 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. complete including carriage of materials in all leads and lifts.Rae wood/Chill wood. |
| 100 | 15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level includong arises, internal round angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth (Cement mortar 1:6) complete including carriage of materials in all leads and lifts |
| 101 | Providing and Fixing of Gun Metal Full Way Valve 15mm Nominal size of approved brand at store of Sub Division No.II at IGMC.Section-II & III including carriage of materials within all leads and lifts. |
| 102 | Providing & fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor 15mm nominal bore |
| 103 | Providing and Fixing G.I Union 15mm .medium including carriage of materials within all leads and lifts. |
| 104 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore |
| 105 | Cleaning of water storage tank by manually removing sluge from water tanks as per direction of Engineer in Charge complete. including carriage of materials within all leads and lifts 2000 Litr Capacity. |
| 106 | 1000 litre Capacity MS/PVC water storage tank |
| 107 | 500 litre Capacity MS/PVC water storage tank |
| 108 | Cleaning of existing inspection manhole including cleaning of chocked sever lines manhole to man hole and main severline of M.C.shimla. |
| 109 | Engagement of Plumber to assemble, install, maintain, and pressure test all pipes, fittings, and fixtures of heating, water, sanitary, drainage, sprinkler, according to specifications and plumbing codes, to determine sources of plumbing malfunctions and c |
| 110 | providing sever man to performs semi- skilled work in connection with the maintenance and operation of a sewer system ,operates catch basin cleaner, removes obstruction from sewer with sewer rods and sever cables,pumps out celiares or excavations that have become flooded as the result of storms, repairs sewers manholes and catch basin abd other related jobs . he is responsible for every day inspection, maintance and complaint disposel and other duty assigend by the junior engineer |
| 111 | providing unskiled labour man for any of duties assigend by junior engineer unskiled jobs such as earth work carriage of material cleaning and washing of areas assisting plumber carpenter etc other duty assigend by the junior engineer |
| 112 | providing skiled carpenter grade II for repair and maintenance in residential & non residential buildings to construct and put into position door and windows frame stairs trusses etc and attend all type of furniture repairs to prepare and repair of wood in fixture can prepare and assemble timer trusses and join timber pieces in treason and compressing numbers there of should be capable of preparing estimate of materials for different jobs any other duty assigend by the junior engineer Please Enable Macros to View BoQ information |
