|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead For thickness of tiles 10 mm to 25 mm |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads. |
| 4 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, including the cost of centering, shuttering and finishing:- 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size.) |
| 5 | Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) 6mm Thick complete including carriage of materials in all leads and lifts. |
| 6 | Providing and fixing 9mm thick HDMR decorative laminated board for back side of cup boards i/c fixing with nickel plated piano hinges with screws etc complete including carriage of materials within all leads and lifts |
| 7 | Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) complete including carriage of materials in all leads and lifts. |
| 8 | Providing and fixing 19mm thick HDMR board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) complete including carriage of materials in all leads and lifts. |
| 9 | Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete).complete including carriage of materials in all leads and lifts. |
| 10 | Providing and fixing 19mm thick HDMR Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) complete including carriage of materials in all leads and lifts. |
| 11 | Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete.transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge.complete including carriage of materials in all leads and lifts. |
| 12 | Providing and fixing square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete.1st class Indian teak wood. complete including carriage of materials in all leads and lifts. |
| 13 | Providing and fixing aluminium handles, ISI marked,or dyed to required colour or shade, with necessary screws etc. complete including carriage of materials in all leads and lifts. 125mm |
| 14 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials in all leads and lifts. |
| 15 | Renewing glass panes with putty and nails wherever necessary including racking out the old putty: glass panes of nominal thickness 4 mm including carriage of materials in all leads and lifts. |
| 16 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials within all leads and lifts. |
| 17 | Providing and fixing frosted plain polycarbonated sheet 1.20mm thick in roofing / lining self drilling screws or with galvanised J or L hooks bolts and nuts with G.I. limpet and bitumen rubber washer complete with all accessories as required to complete the job in all leads and lifts as per direction of Engineer-in-charge. |
| 18 | Providing and fixing polycarbonated tranparent sheet 2.0 mm thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpet and bitumen rubber washer complete with all accessories as required as per direction of Engineer-in-Charge. |
| 19 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :(I) Ridges plain (500 - 600mm) |
| 20 | Providing and fixing 0.63mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/e fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. |
| 21 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600mm X 600mm. |
| 22 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size of Tile 300mm X 300mm. |
| 23 | Providing and laying1.50mm thick PVC/rubber tiles flooring plain, coloured. corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treetment(to be measured separately)for payment including carriage of materials within all leads and lifts |
| 24 | Providing and fixing 3D wallpaper of approved shade fixed with approved adhesive etc. complete including carriage of materials within all leads and lifts. |
| 25 | Providing and fixing at site bed side table in teak wood of size 20''x 14''x 12'' with one drawer with one shutter etc. including carriage of materials within all leads and lifts. |
| 26 | P/F Stainless steel cutlery BASKET for modular kitchen size 15x20x4 inch complete including carriage of materials within all leads and lifts |
| 27 | P/F Stainless steel cutlery BASKET for modular kitchen size 15x20x6 inch complete including carriage of materials within all leads and lifts |
| 28 | P/F Stainless steel cutlery BASKET for modular kitchen size 15x20x8 inch complete including carriage of materials within all leads and lifts |
| 29 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 30 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 31 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials within all leads and lifts. |
| 32 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade one or more coats on old work complete including carriage of materials within all leads and lifts |
| 33 | Finishing walls with Acrylic Smooth (Apex Ultima) exterior paint of required shade : Old work (One or more coat applied complete including priming coat of exterior primer applied inlcuding carriage of materials in all leads and lifts |
| 34 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 35 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture on new wood surface complete as per directions of Engineer in Charge. |
| 36 | Painting Steel work with Deluxe Multi Surface Paint of required shade. One or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of materials in all leads and lifts |
| 37 | Painting wood work with Deluxe Multi Surface Paint of required shade One or more coat applied of approved brand and manufacture complete including carriage of materials in all leads and lifts |
| 38 | Polishing one or more coats with malamine polish of required shade on old wood and stone based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler.complete including carriage of materials within all leads and lifts. |
| 39 | Providing and Fixing of Curtain Rod MS. Powder Coated brackets,end firnels and required number of curtain rings with screws etc. including carriage of materials within all leads and lifts. |
| 40 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P or S trap, complete in all respect as per directions of Engineer-in-Charge. somany jupiter primus |
| 41 | Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and cover to be measured and paid for separately):- including carriage of materials within all leads and lifts |
| 42 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. including carriage of materials within all leads and lifts |
| 43 | Providing and fixing . health faucit with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-charge .including carriage of materials within all leads and lifts. |
| 44 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.including carriage of materials within all leads and lifts HINDWARE MAKE |
| 45 | Providing and fixing 550mmx400mm flat back vitreous China wash basin with pedestal and brackets painted white including cutting holes and making good the same but excluding fittings including carriage of materials within all leads and lifts Cat. No. 10091Ped. 11003 |
| 46 | Providing & fixing 32mm dia, PVC waste pipe for wash basin or sink including carriage of materials within all leads and lifts |
| 47 | Providing and fixing 45cm length UPVC connection pipe with brass unions 15 mm nominal bore complete including carriage of materials within all leads and lifts. |
| 48 | Providing and fixing single hole basin mixer with with top / bottom swinging spout of approved quality including carriage of materials within all leads and lifts HINDWARE MAKE |
| 49 | Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap including carriage of materials within all leads and lifts |
| 50 | Providing and fixing CP Brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.645 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.including carriage of materials within all leads and lifts |
| 51 | Providing and fixing CP Brass towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms including carriage of materials within all leads and lifts |
| 52 | Providing and fixing bevelled mirror 600 x450 mm ofsuperior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. complete including carriage of materials in all leads and lifts. |
| 53 | Providing and fixing chromium plated soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts |
| 54 | Providing and fixing 15mm dia Angle cock 2 in 1 ith wall flange of approved quality including carriage of materials within all leads and lifts. |
| 55 | Providing and fixing 15mm nominal Bib Tap Long body of approved quality complete including carriage of materials within all leads and lifts. |
| 56 | Providing and fixing 15mm dia C.P.brass Bib cock of approved quality including carriage of materials within all leads and lifts. HINDWARE MAKE complete including carriage of materials in all leads and lifts. |
| 57 | Providing and fixing 20 tally channel of approved quality complete including carriage of materials within all leads and lifts. |
| 58 | Disposal of building rubbish/ malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 mm initial lead, for all leads including all lifts involved. Please Enable Macros to View BoQ information |
