|
| 1 | Demolition of Precast Concrete work built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 2 | Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key complete all as specified and as directed. |
| 3 | Demolition of RCC reinforcement cut as required to facilitate demolition of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 4 | M&L Pre-cast cement concrete block masonry Type C1 1:3:6 (20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed. |
| 5 | M&L for precast cement concrete block masonry with solid Type C1 1:3:6 (20mm graded aggregate as per IS 383) of 10 cm in width and setting in CM 1:6 complete all as specified and directed. |
| 6 | M & L for rendering to concrete or block masonry surfaces or surfaces other than fair faces of brick surfaces, 10mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 7 | M&L for rendering 5mm thick ceiling plaster in CM (1:3) on concrete surfaces finished even & smooth (without using extra cement) complete all as specified and as directed. |
| 8 | M & L for rendering 5 mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and fair complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately. |
| 9 | Supply only water proofing compound ISI marked complete all as specified and as directed. Note : WPC may apply as per manufactures instruction or 3% by the wt of cement |
| 10 | Removing loose and broken concrete by chiseling/ mechanically etc from the roof slab, column, beam and similar structural members cutting edges, cleaning the dismantled portion with wire brush etc to make the reinforcement naked and remove dust, dirt and other foreign particle etc and washing with clean water with pressure and removing rubbish off the premises to a distance not exceeding 50 mtrs and including necessary safety precautions and scaffolding up to a height of 15 mtrs complete all as specified and as directed. |
| 11 | S&F for Hard drawn steel wire fabric weight not exceeding 4 kg per square metre, cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia welding to existing reinforcement complete all as specified and as directed. |
| 12 | M/L for applying one coat of epoxy bonding coat as per manufacture's instruction to bind old concrete surfaces of soffit of slab, column, beam and similar structural members for new gunited / cement surface. Make : IPH 21 EB of Harjas Coatings & Polymers / Nitobond EP of FOSROC or equivalent make in Dr. Fix it of Pidilite Industries / MC Bauchemie / BASF complete all as specified and directed. |
| 13 | M&L for MS TMT bars 10mm dia and over cut to length bent to shape reqd including cranking, bending spirally for hooking for columns, hooking ends and and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified . |
| 14 | M&L for preparation of newly plastered wall surface applying two coats of plastic emulsion paint over a coat of primer complete all as speicified and as directed. |
| 15 | M&L for applying two coats of plastic emulsion paint over a coat of primer on newly plastered surface of ceiling including preparation of surface complete all as specified and directed. Make: Asian Paint Apcolite advanced Premium paint or equivalent . |
| 16 | M&L for preparation of New plastered surface and applying two coat of 100% premium acrylic emlusion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE COLOUR with silicon additives coat applied @1.67litre/10sqm over and including priming coat of exterior primer applied @2.2kg/10sqm complete all as specified and as directed.Note: Asian Paints( Apex Ultima), Berger (weather coat Long life Fiexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+Super Luxury Emulsion) The rate inclusive of scaffolding at any height |
| 17 | M&L for complete removal of existing treatement and applying two coats of plastic emulsion paint over a coat of primer on wall surface all as specified and directed. Make: Asian Paint Apcolite Advanced Premium Emulsion Paint or equivalent as approved by GE. |
| 18 | M&L for compolete removal of existing treatment and applying two coats of plastic emulsion paint over a coat of primer on ceiling surfaces all as specified and directed. Make.Asian Paint Apcolite Advanced Premium Emulsion Paint or equivalent as approved by GE |
| 19 | M & L Preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on truss work & new pressed steel frame complete all as specified and directed. |
| 20 | M&L for complete removal of existing treatment and preparation of old plastered wall surface using mechanical means and removing all fungus, black stains, algae etc., and applying one coat of 100% premium acrylic emlusion paint having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of WHITE COLOUR with silicon additives coat applied @1.43litre/10sqm over and including priming coat of exterior primer applied @0.9litre/10sqm complete all as specified and as directed.Make: Asian Paints( Apex Ultima), Berger (weather coat Long life Fiexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+Super Luxury Emulsion) The rate inclusive of scaffolding at any height |
| 21 | M&L for complete removal of exisitng treatment and preparation of old plastered surface using mechanical means and removing all fungus, black algae etc and applying one coat of 100% premium acrylic emlusion paint (company depot tinted) having VOC less than 50gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of with silicon additives coat applied @1.67litre/10sqm over and including priming coat of exterior primer applied @0.9litre/10sqm complete all as specified and as directed.Make: Asian Paints( Apex Ultima), Berger (weather coat Long life Fiexo) Nerolac (Excel Total), Shalimar Paints (Weatherpro+Super Luxury Emulsion) The rate inclusive of scaffolding at any height |
| 22 | M&L for preparation of old painted steel surfaces over 10cm in width or girth and applying Two coats of syanthetic enamel paint complete all as specified and as directed. |
| 23 | M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered/ complete removed surface to prepare the surface even and smooth complete all as specified and directed. |
| 24 | Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing) and removing serviceable tiles to stores and rubbish off the premises complete all as specified and directed. |
| 25 | M&L for Double charged Virified tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 26 | M&L for ceramic coloured tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm in floor, over 15 mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified and as directed. |
| 27 | -Ditto all as per item No 26 here-in-before but in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile over 10mm thick backing in cement mortar (1:3) complete all as specified and directed. |
| 28 | M&L for Glazed Ceramic tiles 450x300x 8-10 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick backing in cement mortar (1:3) complete all as specified and directed. |
| 29 | Dismantling of stone slabs and tiles of any description or thickness in floors, approns and laid bedded and pointed in any mortar atc. |
| 30 | M & L for 25 mm thick, PCC 1:2:4, Type B-0, using 12.5mm graded aggregate as in Sub base for flooring/levelling coarse, sunken floor etc complete all as specified and as directed. |
| 31 | M&Lfor virtified ceramic tiles 10mm thick (square/ rectangular) polished heavy duty vertified tiles 400x400 size in floors, steps, raisers, etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM (1:4) complete all as specified and directed. |
| 32 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and direcetd. |
| 33 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations all as specified. |
| 34 | Taking down chowkats or frames (without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4.0 Sqm each.(including Aluminium windows/ventilators etc) complete all as specified directed. |
| 35 | Taking down chowkats or frames without taking off shutters from the frame area n.exc 1.5 Sqm each including Aluminium windows /ventilators etc complete all as specified diected. |
| 36 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet edges will be painted to match with printed sheet reinforced with MS square tube in opening as per specification and drawing complete all as specified and directed. |
| 37 | S&F factory made solid panel PVC Door shutter 30mm thick (Style) consisting of frame made out MS frame shall be covered with heat moulded wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stilesand rails and decorative PVC beading of 10mmx10mm (90oC) used instead of exposed portion of PVC sheet beading having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail, & bottom rail, Panneling of colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement at site as per specification and drawing complete all as specifie directed. |
| 38 | S&F anodised aluminimum frames or shutter for doors, partititons, windows and ventilators and similar works with one or more rebates incl necessary fittings and fixtures such as jointing cleats, glazing clips, rubber packings, screws, hanldes stainless steel adjustable friction stay hines etc., as required fixed to aluminimum frame complete all as specified. Note: (i) Unit rate quoted shall deemed to inlclude cost of rubber beading, fittings such as handles, SS friction stay hines and fixing of glass wire and cloth decogrill etc., (ii) Glass wire cloth and grill to be measured and paid separately. |
| 39 | S& F ordinary quality sheet glass 4.00 mm thick in square n.exc.0.50 sqm in each pane complete all as specified and as directed. |
| 40 | S&F Figured glass 4.00mm thick , pin head type and glazing with oil putty in squares n.exc 0.5 sq.m in each pane complete all as specified and as directed. |
| 41 | S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed . |
| 42 | S&F 12mm thick prelaminated particle board interior garade, prelaminated on both sides with decorative choice lamination fixed as in panels of aluminimum door shutters partitition complete all as specified and directed. |
| 43 | S&F Sheet glass,5.5mm thick ordinary quality and glazing with oil putty in square exc 0.5sq. m in each pane complete all as specified and directed. |
| 44 | S&F in repair aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 60 to 80 kg complete all as specified and as directed. |
| 45 | M& L in repairs Brass mortice lock vertical type size 100mm 4 leavers with stain less steel handle set suitable for right or left, inside or out side opening doors complete all as speicified and directed. |
| 46 | S&F in repair 18 to 20mm thick prelaminated MDF panels of interior grade type-II approved shade for kitchen cabinet/wardrobe/wall panelling fixing with necessary fitting like keku fitting, spring clip, hanger plate, modular hinge/clip push fix or stud fitting as per manufactures instructions complete all as specified and directed. |
| 47 | S&F 100 mm brass handles, cast type, polished bright complete all as specified and directed. |
| 48 | S&F contunoius (piano) hinges, mild steel, bright finish or electrogalvanished and width of flaps 30 mm (when open ) complete all as specified and directed. |
| 49 | S&F stainless steel butt hinges, 100mm medium weight complete all as specified and directed. |
| 50 | S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 51 | S&F 100mm aluminium handles, cast type, anodised complete all as specified and directed. |
| 52 | S & F anodized aluminum door seals of 32mm (overall size) with standard 1mm thick aluminum sections and bottom brush and provision of counter sunk holes for screws etc complete all as specified and directed. |
| 53 | S&F of 150mm Floor door stoper of aluminium alloy and tounge, anodised, with hard drawn steel sring, fixed in door complete all as specified and directed. |
| 54 | S&F 25mm dia aluminium anodised best quality curtain rod alongwith brackets in pairs fixed both ends (rates included of brackets) complete all as specified and as directed. |
| 55 | S&F in repair decorative globes for curtain rails to be fixed at both end of curtain rails all as specified and directed. |
| 56 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 57 | S&F MS Roof trusses (Framed), trussed, purlins, rafters, crane gantries, rails ,posts and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc.including necessary welding confirming to Fe-410-W (Gde-E250 quality-A) complete all as specified and directed. |
| 58 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as specified and directed. |
| 59 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladders, framed balusters; walk ways; railings, framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed. |
| 60 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed. Note : Height of the bldg up to G+3 storey including necessary safety arrangements |
| 61 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed.Note : Height of the bldg up to G+3 storey including necessary safety arrangements. |
| 62 | S & F Aluminium flat iron work in wind ties 40x6mm size fixed with 50mm/ 75 mm aluminium self staging screws with integral EPDM washer screwed in roof covering all as directed. Note :- Height of the bldg up to 15 mtrs including necessary safety arrangements |
| 63 | M&L for two coats of synthetic enamel paint over a coat of Red oxide, zinc primer including preparation of new steel/iron surface of any description over 10 cm in width or girth complete all as specified and directed. |
| 64 | Taking down 15/20mm Steel / CPVC tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 65 | Taking down 25mm Steel / CPVC tubing and connections including cleaning for refixing or removal to store complete all as specified and directed. |
| 66 | Supply and laying of CPVC pipes 20 mm dia outer bore SDR 11 &plain CPVC SDR 11 fittings on walls /ceilings or laying in floors complete all as specified and directed. |
| 67 | Supply and laying of CPVC pipes 25mm dia outer bore SDR 11 &plain CPVC SDR 11 fittings on walls /ceilings or laying in floors complete all as specified and directed. |
| 68 | Cutting chases in concrete block walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing etc., and making good, cutting not exceeding 10 cm girth complete all as specified and directed. |
| 69 | S&F 20 mm bore CPVC Brass Elbow complete all as directed. |
| 70 | S&F 20 mm bore Brass Elbow reducer(3/4 x1/2) complete all as directed. |
| 71 | S&F 20 mm bore CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as directed. |
| 72 | S&F 25 mm bore CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as directed. |
| 73 | S&F 20 mm bore CPVC Female Brass Threaded Adaptor (FTA/FBTA) complete all as directed. |
| 74 | S&F 25 mm bore CPVC Female Brass Threaded Adaptor (FTA/FBTA) complete all as directed. |
| 75 | S&F 20 mm bore CPVC Brass Tee complete all as directed. |
| 76 | S&F 25 mm bore CPVC Brass Tank Adaptor complete all as directed. |
| 77 | S&F 20mm bore CPVC Brass Union complete all as directed. |
| 78 | S&F 25mm bore CPVC Brass Union complete all as directed. |
| 79 | Demolition and breaking up drain pipes of size 75/100 mm dia (Salt glazed ware, AC or Reinforced concrete, PVC (SWR)) set in cement mortar complete all as specified and directed. |
| 80 | S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. |
| 81 | S & F 110mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or as in floors complete all as specified and as directed. |
| 82 | S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 83 | S & F 75mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls including necessary brackets, clamps as in down pipes complete all as specified and as directed. |
| 84 | S&F PVC (SWR) floor traps 75mm bore with stainless steel grating (measured seperately) including jointing to waste pipe and in cement concrete 1:2:4 type B-1 complete all as specified and as directed. |
| 85 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement and in cement concrete 1:2:4 type B1 complete all as specified and as directed. |
| 86 | S&F in repairs Vitreous China wash down water closet pan of size 540x375x415mm 'P' trap or 'S' Trap (pedestal pattern), any colour including necessary fittings (excluding flushing cistern and flush pipe) complete all as specified and as directed. |
| 87 | S&F in Repairs 10 ltrs PVC valveless, syphonic action type, flushing cistern, low level, any colour , with inlet, ball valve, float and handle including brackets, and necessary connections to pipes with PVC connections 20mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 88 | S&F in repair Waste pipe any dia (32/40mm) alongwith necessary fittings connected to wash hand basin /kitchen sink complete all as specified and as directed. |
| 89 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed. |
| 90 | S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 91 | S&F in repairs Vitreous China wash basin, white, flat back, size 630x450mm fixed on MS brackets including 32 mm bore CP waste coupling complete all as specified and directed. |
| 92 | S&F in repair Pillar taps,heavy duty chromium plated, fancy type 15 mm dia cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 93 | Supply only PVC connections 15/20mm size with PTMT nuts of length 600mm complete all as specified and as directed. |
| 94 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 95 | S&F CP Towel Ring fixed with and including Chromium plated brass screws and wall plugs (Minimum weight 90gms) complete all as specified and as directed. |
| 96 | S&F in repairs 600 mm long CP Brass Towel Rail 20 mm dia fixed to wall with necessary chromium plated screws and wall plugs complete all as specified and as directed. |
| 97 | S&F in repair brass chromium plated over head shower rose with arm 125 mm size with long body with swivel joint including fixing to CPVC/ steel pipe or union, complete all as specified and as directed. |
| 98 | S&F in repairs Angular stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed. |
| 99 | S & F in repairs to Bib Taps, cast copper alloy heavy duty, 15 mm dia, Chromium Plated, long body Fancy Type screwed down for iron pipe and fixed etc complete all as specified and as directed. |
| 100 | S&F in repairs two way bib tap cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for pipe or union fixed for 15mm bore complete all as specified and directed. |
| 101 | S&F in repairs 15 mm dia Stop cock chromium plated fancy type with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe/CPVC pipe or for unions and fixed all as directed. |
| 102 | S&F in repairs stop valves cast copper alloy chromium plated with long shank and cup (concealed type) fancy type screwed down high pressure screwed both ends for pipe or union fixed for 15mm bore complete all as specified and as directed. |
| 103 | S&F Brass Chromium plated mixer, fancy type ( concealed type) for mixing hot & cold water screwed down for iron pipe/CPVC pipe and fixed complete all as specified and directed. |
| 104 | S&F in repair soap dish, brass, chromium plated fixed to wall with brass chromium plated screw, complete all as specified and as directed. |
| 105 | S&F in repair 125 mm dia CP grating incl joints with solvent cement complete all as specified and directed. |
| 106 | S&F in repair Kitchen sinks with drainage board made of stainless steel l.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste fittings and couplings complete all as specified and as directed. |
| 107 | S&F in repair CP Waste coupling any 32/40 (any dia) suitable for Kitchen Sink/WHB fixed with waste pipe complete all as specified and as directed. |
| 108 | S&F in repairs stainless steel plate rack of size 900x 750 x 250 mm made of 1.00mm thick stainless steel fixed into wall with necessary brass screws and plugs complete all as specified and as directed. Please Enable Macros to View BoQ information |
