|
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified and directed. |
| 2 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as speciified and directed. |
| 3 | Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter, ridge & similar works fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any type and any thickness including cover fillets/GI grid framework complete all as specified and directed. |
| 5 | False ceiling of grid of galvanzed steel tee/ angle (power coated ) of grid size 600x600mm as comprising of main and secondry tee ( weight not less than 240gm /RM) and wall perimeter angle (weight of section not less than 217gm/RM) all around of walls suspended with 4mm GI wire @ 1200mm c/c of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels insert of any type including 4mm thick everest designer ceiling boards size 595x595mm fixed in position all as directed. |
| 6 | Dismantling timber scantlings (framed work) 40 Sqcm and over in section, in any position complete all as specified and as directed. |
| 7 | Dismantling timber scantling under 40sqcm in section unframed work as in fillets, rails, posts, rafters, purlins etc , complete all as specified and directed. |
| 8 | Rolled mild steel structural steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastening and heavy brackets (Beam, tee, angle, channel or hollow steel section) including distance pieces, cleats etc confirming to Fe-290-W (Gde-E-165) quality B complete all as specified and as directed. |
| 9 | Demolition of brick work or stone masonary built in cement mortar including all quions, arches , pillars etc. complete all as specified and directed. |
| 10 | Walling of random rubble uncoursed, well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified and directed. |
| 11 | Description all as per item No 10 above but except stone. |
| 12 | Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etccomplete all as specified and as directed. |
| 13 | Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement including use of water prrofing liquid (as per manufacturer instruction) complete all as specified and as directed.Note:- WPC liquid shall be measured and paid separately under relevant item of BOQ |
| 14 | Rendering 10 mm thick cement plaster with cement mortar(1:6) on other than fair faces of brick or stone masonry surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 15 | Supply only liquid water proofing compound complete all as specified and directed. |
| 16 | GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste in repairs in patches n exc 5 sq. m each, including taking down old and jointing new to old as required all as spd and directed. |
| 17 | Applying 2mm thick wall care putty over newly plastered / old plastered surfaces of wall, complete all as specified and as directed. |
| 18 | Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper including one coat of alkali resistant primer complete all as specified and as directed. |
| 19 | Preparation of old plastered surfaces of walls and applying two coat of oil bound distemper, complete all as speicfied and directed. |
| 20 | Preparatrion of new plastered and unplastered surfaces of walls and applying two coat of cement based paint over alkali resistant priming paint, complete all as speicfied and directed. |
| 21 | Preparation of old painted surfaces by washing, rubbing down and stopping of plastered surfaces and applying two coats of cement base paint white or tined on wall complete all as specified and as directed. |
| 22 | Repair to balcony/facia and soffit of chajjas etc by taking down old plastered surfaces and hacking clearly the edges and corners smooth and rounded for new plastered area exceeding 30sqcm in width or girth & applying rendering 15 mm thick dubbing coat where required to match with the existing thickness in CM 1:3 including formwork/scaffolding work upto height 7.00mtr & applying two coats of exterior emulsion weather proof paint (Apex) as reqd over one coat of primer above ground level of bldg complete all as specified and as directed. |
| 23 | Writing letters or figures ( Block , Roman, Italic or Indian ) n exc 30 cm high with approved paint complete all as specified and directed. |
| 24 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons,walls etc, complete all as specified and directed. |
| 25 | 25 mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregrate) as in sub base to path/floors without using extra cement complete all as specified and directed. |
| 26 | Non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular), area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement laid over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, complete all as specified and directed. |
| 27 | Description all as per item No 26 above but but on dado/skirting etc incl 10 mm thick rendering in CM 1:4 complete all as directed. |
| 28 | Non skid coloured ceramic tiles 7mm to 8mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 15mm thick screed bed/bedding layers in cement and sand mortar 1:4 complete all as specified and directed. |
| 29 | Glazed ceramic coloured tiles 450mmx300mmx7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed. |
| 30 | 20mm thick granite (of approved type colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking platform laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and moulding the edges, complete all as specified and directed. |
| 31 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically described (reinforement cut as required to facilitate demolition), complete all as directed. |
| 32 | Reinforced cement concrete (nominal mix) type B1 1:2:4 using (20mm graded crushed stone aggregatge) for Chajjas/Balcony/Landing work complete all as specified and directed. |
| 33 | Formwork to sides and soffits/faccia of floor or roof beams, beam haunchings, girders, bressummers, lintels, chajja, cantilevers, shelves including sup- ports, overhangs, etc. complete all as specified and directed. |
| 34 | Reinforced cement concrete (Nominal mix), type B1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including use and waste form work, complete all as specified and as directed. |
| 35 | Form work to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick for rough finished surfaces of concrete, complete all as specified and as directed. |
| 36 | TMT bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500, complete all as specified & directed. |
| 37 | TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified and directed. |
| 38 | Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each, complete all as specified and directed. |
| 39 | Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) n.exc 1.50 sqm complete all as specified and directed. |
| 40 | Factory made Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick flat iron projecting 10cm on either side & tarring back of chowkats and holdfasts with & including PCC 1:3:6 type C-0 as in back fitting of pressed steel frame, complete all as specified & directed. |
| 41 | Factory made Pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick flat iron projecting 10cm on either side & tarring back of chowkats and holdfasts with & including PCC 1:3:6 type C-0 as in back fitting of pressed steel frame, complete all as specified & directed. |
| 42 | Steel window /ventilator (Box type factory made with single shutter with or without dovetailed bar (glass shutter) of size 79mmx39mm,16 gauge rectangular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts in each shutter 100mm long with & including 8mm square bar grills, complete all as specified & as shown on drg No. CEUZ/TD/1269/2008 Sh No 1/1 to 1/3 . |
| 43 | PCC 1:3:6 type C-0 (Using 12.5mm graded crushed stone aggregate) for hold fast blocks, including necessary form work for rough finished surfaces etc complete all as specified and as directed. |
| 44 | 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 45 | 35mm thick 2nd class soft wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc devided into square with sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed. |
| 46 | Mild steel springs for doors, 300 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 47 | Floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue,anodised,with hard drawn steel spring,fixed in bottom body of door complete all as specified and as directed. |
| 48 | 300mm long aluminium alloy anodised sliding door bolt with hasp staple, bolt type, and fixing clips of sheet, cast or extruded sections & fixing bolts and sliding bolts of extruded section or cast aluminium alloy, ISI marked complete all as specified and directed. |
| 49 | Aluminium handle cast type anodised of size 150mm long ISI marked complete extruded all as specified and directed. |
| 50 | 200 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked complete all as specified and as directed. |
| 51 | Curtain rail, 20mm dia Stainless steel fixed with and including two Nos of bracket & side cup including taking down of old curtains rods, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 52 | Curtain rail, 20mm dia Stainless steel fixed with and including two Nos of bracket & side cup including taking down of old curtains rods, complete all as specified and directed. Please Enable Macros to View BoQ information |
