Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone /boulder masonry, built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc, complete all as specified and directed by Engineer-in-Charge. |
| 2 | Brick work with sub class 'B' bricks straight or curved on plan, exceeding 6 m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 3 | Description all as per Ser item No 2.00 here-in-before, but except bricks, complete all as specified and directed by Engr-in charge. Note : Old bricks obtained against demolition shall be used. |
| 4 | Supply only integral water proofing compound as per latest IS specification, complete all as specified and directed by Engr-in charge. |
| 5 | Demolition of cement concrete (unreinforced) in ground floor and in paving’s not exceeding 15 cm thickness (below or above ground level), complete all as specified and directed by Engr-in charge. |
| 6 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed by Engr-in charge. |
| 7 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in charge. |
| 8 | Rolled mild steel work as in roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to grade Fe-410 W(Gde E-250) quality-A, steel work, complete all as specified and directed . |
| 9 | Rolled mild steel plates (plain or chequere d) channels, squarecut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to grade Fe.290.Gde-E-165, steel work, complete all as specified and directed by Engr-in charge. |
| 10 | Mild steel framed work such as grills, gratings with ends of bars shouldered or reveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railings, frame work of water tanks and similar works, conforming to Fe-290, Gde E-165, complete all as specified and directed by Engr-in charge. |
| 11 | Welded steel wire fabric supplied and fixed to wood or steel members weight not exc. 4 kg per square metre, complete all as specified and directed by Engr-in charge. |
| 12 | Dismantling bestos cement (corrugated, semi corrugated, etc) sheets in roof coverings, complete all as specified and directed by Engr-in charge. |
| 13 | M&L prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 14 | M&L prepainted galvalume aluminium zink coating GI based in steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engr-in charge. |
| 15 | Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, and removing from site, complete all as specified and directed by Engr-in charge. |
| 16 | Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm but not exceeding 4 Sqm each, and removing from site, complete all as specified and directed by Engr-in charge. |
| 17 | Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, and removing from site, complete all as specified and directed by Engr-in charge. |
| 18 | Taking down steel windows including frames and shutters any size and removing to store, complete all as specified and directed by Engr-in charge. |
| 19 | S&F 2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge,etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Pt-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt, handle, hinges, aldrop bolt etc, complete all as specified and directed by Engr-in charge. |
| 20 | S&F factory made, 2nd class hard wood (sal/hollock), plain framed, panelled shutters (two -three panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt,handle,hinges,aldrop bolt etc, complete all as specified and directed by Engr-in charge. |
| 21 | Factory made solid PVC moulded door shutter ( with particle board core) of 30mm thick with 2 raised panel design with 2mm thick moulded PVC sheet on back face & 2mm coloured prelaminated PVC sheet on front face as specified in SSR Part II 2010 Sec 8 clause 8 B 1 to 8B 2.1 complete all as specified and directed by Engr-in charge. |
| 22 | S&F steel window (box type) factory made with sidehung shutter including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing barsdovetailed or welded including one shop coat of red oxide primer, complete all as specified and directed by Engr-in charge. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/1269/2008 Sheet 1/3 to 3/3 . ii) MS fillets, glazing wire gauge shall be measured and paid seprately. |
| 23 | Description all as per Ser item No 24 here-in-before but without glazing bar, complete all as specified and directed by Engr-in-charge. Note : i) The window shall be fabricated as per Drg No Z/TD/1269/2008 sheet 1/3 to 3/3. ii) MS fillets, glazing, wire gauge shall be measured and paid seprately. |
| 24 | Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2004), ccomplete all as specified and directed by Engr-in charge. |
| 25 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004), complete all as specified and directed by Engr-in charge. Make: Rajshri or equivalent as approved. |
| 26 | S&F aluminum handles cast type, anodised, 150 mm size, complete all as specified and directed by Engr-in charge. |
| 27 | S&F in repair mild steel cold rolled butt hinges medium weight 100 mm long, including fixing and welding to pressed steel/wooden door frame if required, complete all as specified and directed by Engr-in charge. |
| 28 | S&F of 200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt, complete all as specified and directed by Engr-in charge. |
| 29 | S&F of mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a inimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified and directed by Engr-in charge. |
| 30 | Preparation of new/old wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed by Engr-in charge. |
| 31 | Pressed steel frames of size 105x60mm for doors with one ormore rebates including necessary fixing l ugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed by Engr-in charge. |
| 32 | Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and directed by Engr-in charge. |
| 33 | 0M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast, complete all as specified and directed by Engr-in charge. |
| 34 | S&F of stainless steel wire clothcut for new/old door & window to size, 0.36 mm nominal dia wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staple in repairs, complete all as specified and directed by Engr-in charge. |
| 35 | Dismantling floor, hearth or wall tiling including CM bedding but not backing, removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in charge. |
| 36 | M&L for ceramic coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor/ etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid complete all as specified and directed by Engr-in charge. |
| 37 | Description all as per Ser item No 43.00 here-in-before but on skirting over vertical surfaces & including 10 mm thick cement mortar 1:4 screed,/plaster set and jointed with grey cement slurry and pointed in grout of matching shade of tiles, complete all as specified and directed. |
| 38 | Glazed ceramic coloured tiles area exc .06 Sqm and n exc 0.16 Sqm each of 7mm thick as in vertical/Dado surfaces such as skirting dado etc set and jointed in neat cement slurry, jointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in charge. Make - Johnson/Somany or as approved by GE. |
| 39 | Digital ceramic coloured tiles exc 0.11 sqm each tile and not exceeding 0.18 sqm but not exceeding 0.18 sqm sqm,7mm thick as in vertical/Dado surfaces such as skirting dado etc set and jointed in neat cement slurry, jointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in-charge.Glazed ceramic coloured tiles exceeding .075 sqm but not exceeding 0.15sqm as in vertical/Dado surfaces such as skirting dado etc set and jointed in neat cement slurry, jointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed by Engr-in charge. |
| 40 | M&L for Non skid coloured 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid , complete all as specified and directed by Engr-in charge. |
| 41 | M&L Add to rates for item no 38 to 42 for joint free Coloured tiles Nonskid/ceramic/digital/glazed tiles complete all as specified and directed. |
| 42 | M&L Screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6, for laying floor finishes complete all as specified and directed by Engr-in charge. |
| 43 | S & F for Vitrified coloured ceramic tile 10mm thick double charged light shade (square / rectangular) polished, area of each tile exceeding 0.36 sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed by Engr-in charge. |
| 44 | M&L Screed bed or bedding layer of mortar 20 mm thick in Cement Mortar 1:6, for laying floor finishes complete all as specified and directed. |
| 45 | .Demolition of granite slabs laid bedded pointed in any mortar or of any description and thickness, complete all as specified and directed by Engr-in charge. |
| 46 | M & L for Granite (of any type) slabs 20mm thick machine cut, bedded and jointed with grey cement slurry as in flooring, staircase steps & risers etc. and pointed with white cement with admixture of pigment to match the shade granite stone including grinding and polishing over and including 15mm thick screed bed in Cement Mortar 1:4 in floors etc, complete all as specified and directed by Engr-in charge. |
| 47 | M & L for 75mm thick cement concrete type C-2, 1:3:6 (using 40mm graded aggregate) as sub base and hard standing finished fair & even without using extra cement, complete all as specified and directed by Engr-in charge. |
| 48 | M&L PCC (1:4:8) type D2 using 40mm graded aggregate 100mm thick as in sub base complete all as specified and directed by Engr-in charge. |
| 49 | M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggr) as in plinth protection/path finishing the surface even and smooth without using extra cement complete all as specified and directed by Engr-in charge. Note : Plinth protection shall be laid in (1:20) slope. The concrete shall be laid at a stretch not exceeding 3metre in length. Joint gap between adjoining slab, at corners and at junctions of walls shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/ 25 grade mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3 metre interval at corner and as junction of walls. complete all as specified and directed by Engr-in- charge. |
| 50 | Roughening surfaces of old concrete surfaces by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed by Engr-in- charge. |
| 51 | M&L for brushing neat cement slurry with 3.00kg of cement per sq.metre, complete all as specified and directed by Engr-in- charge. |
| 52 | Material and Labour for chequered/Durastone' ceramic tiles, coloured/designer, 12 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq M but not exceeding 0.11 Sq M, conforming to IS 4457-2007, on floors, set over and including 20 mm thick screed bed in cement mortar (1: 4) and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour, complete all as specified and directed by Engr-in-charge. Make:- (Johnson 'Endura'/ Somany 'Durastone'/ Regency'Duro') |
| 53 | Providing and laying 60mm thick factory made chamferd edge cement concrtete paver block of M-35 grade with approved colour ,design and patternas in foot path ,lawns, driver ways light parking etc. of required strength and thickness shape, made by table vibratory method using bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed by Engr-in- charge. |
| 54 | M&L, sand cushioning to under concrete interlocking paver block including watering & consolidation complete all as specified and directed by Engr-in- charge. |
| 55 | Taking down cement plaster including tiles of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engr-in- charge. |
| 56 | Rendering 15mm thick in cement mortar 1:4 on fair faces of bricks work/concrete surface finished the surface even and smooth (without using extra cement) as on walls, complete all as specified and directed by Engr-in- charge. Notes :- Plaster shall be carried out upto any height in atches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work. |
| 57 | Rendering 10mm thick in cement mortar 1:6 on fair faces of bricks work/concrete surface finished the surface even and smooth(without using extra cement) as on walls, complete all as specified and directed by Engr-in-charge. Notes :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work. |
| 58 | Rendering 05mm thick in cement mortar 1:3 on fair faces of concrete surface as on ceiling, facia and stair cases etc finished the surface even and smooth (without using extra cement), complete all as specified and directed by Engr-in- charge. Notes :- Plaster shall be carried out upto any height in patches and contractor shall have no claim for height and scaffolding what so ever is required to complete the work. |
| 59 | Complete removal of existing treatment using grinding machine/Mechanical means (as per instructions) on walls including scraping , removing all mud, cake with wire brush and gunny bags from old plastered surfaces and preparation of surfaces by using sand paper and applied two coats of ( two- three layer) total thickness 1.5mm @ 1.5 kgs/sqm of Altel/Birla white putty to obtain smooth/ even finish using sand paper and applying two coats of Oil Bomd Distemper over one coat of alkali resistant cement based priming paint complete all as specified and firected. |
| 60 | M&L for preparation of newly plaster surfaces of wall by using sand paper and applied two coats of ( two- three layer) total thickness 1.5mm @ 1.5 kgs/sqm of Altel/Birla white putty to obtain smooth/ even finish using sand paper and applying two coats of Oil Bomd Distemper over one coat of alkali resistant cement based priming paint complete all as specified and directed by Engr-in- charge. |
| 61 | Preparation of newly plastered surfaces of wall and applying two coats of cement base paint white or tinted over a coat of white primer alkali resistant priming paint complete all as specified and directed by Engr-in- charge. |
| 62 | M&L two coat of cement base paint over one coat of alkali resistant priming paint over old plastered surfaces of wall including preparing surfaces after complete removal of existing treatment upto 12-15m height from ground lavel and at all locations as directed including scaffolding, cleaning and curing etc complete all as specified and directed by Engr-in- charge. |
| 63 | Preparation of old plastered/unplastered wall surfaces and applying one coat of oil bound distemper over one coat of primer (including wahsing, rubbing down and stopping of distempered and painted surfaces), complete all as specified and directed by Engr-in- charge. |
| 64 | Preparation of old plastered/unplastered wall surfaces and applying one coat of white wash, complete all as specified and directed by Engr-in- charge. |
| 65 | Preparation of newly plastered surfaces of ceiling and two coat of colour wash over one coat of primer applying Chalk whiting, on plastered surfaces, complete all as specified and directed by Engr-in- charge. |
| 66 | Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in- charge. |
| 67 | Material and Labour for two coats of Oil Bound Distemper over one coat primer incl preparing of surface of ceiling using AUTO-ROLLER and AIR-LESS PAINT SPRAYER complete all as specified and directed by Engr-in- charge. |
| 68 | Material and Labour for one coats of Oil Bound Distemper over one coat primer incl preparing of surface of ceiling using AUTO-ROLLER and AIR-LESS PAINT SPRAYER complete all as specified and directed by Engr-in- charge. |
| 69 | Taking up or down steel tubing with connections for cleaning for refixing or removing to toreyard complete of bore 15mm, complete all as specified and directed. |
| 70 | Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 20mm, complete all as specified and directed by Engr-in- charge. |
| 71 | M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm, complete all as specified and directed by Engr-in- charge. |
| 72 | Fixing only Steel water tubing 15mm dia medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors, complete all as specified and directed by Engr-in- charge. |
| 73 | M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts,diminishing pieces, caps and plugs, unions etc.) of nominal bore 20 mm, complete all as specified and directed by Engr-in- charge. |
| 74 | Fixing only Steel water tubing 20mm dia medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors, complete all as specified and directed by Engr-in- charge. |
| 75 | S&F in repairs Rotational moulded polyethylene water storage tank 1000 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, making connections incl 20mm bore ball valve brass with polyethylene float and fly nut and tank nipples incl dismantling existing water tank of any capacity and removing from site, complete all as specified and directed by Engr-in- charge. |
| 76 | Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity (Tripple layer) white in colour including water tank cover (internaly/interlocking arrangment for water tank cover), hoisted and fixed in position including tank nipple inlet & outlet and connecting up pipes, complete all as specified and directed by Engr-in- charge. (fixed in repair) |
| 77 | Supply and fixing in repair ball valves of size 15 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site, complete all as specified and directed by Engr-in- charge. |
| 78 | Supply and fixing in repair ball valves of size 20 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as reqd at site complete all as specified and directed by Engr-in- charge. |
| 79 | Supply and fixing in repair angle valves cast copper alloy 15mm, screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions including necessary fitting as required at site, complete all as specified and directed by Engr-in- charge. |
| 80 | S&F in repair 15mm dia stop cock fancy type chromium plated, complete all as specified and directed by Engr-in- charge. |
| 81 | S&F as in repair bib tap 15mm bore fancy type chromium plated all as specified, complete all as specified and directed by Engr-in- charge. |
| 82 | S&F bib cock 15mm bore fancy type long body chromium plated in repair, complete all as specified and directed by Engr-in- charge. |
| 83 | S & F in repair 20 mm dia gun metal, globe or gate valves/Angle Valve one way or two way , with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed by Engr-in- charge. |
| 84 | Description all as per Ser item No 83.00 here-in-before, but dia 15mm, complete all as specified and directed by Engr-in- charge. |
| 85 | Preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engr-in- charge. |
| 86 | Precast reinforced cement concrete, (Nominal mix), Type B-1, 1:2:4 (using 20mm graded crushed stone aggregates) as in cover slab, manhole cover, shelves and similar articles withplain face, set and jointed in cement mortar 1:4, complete all as specified and directed by Engr-in- charge. (Note : Reinforcement shall be measured and paid separately) |
| 87 | Material and labour 40 mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in floor complete all as specified and directed by Engr-in- charge. |
| 88 | TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for slabs,beam, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed by Engr-in- charge. |
| 89 | TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for slabs,beam hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed by Engr-in- charge. |
| 90 | Hacking out old broken glasses (any thickness, size, quality or description) from wooden frames or steel frames, glazed with putty or fixed with wooden beads, complete all as specified and directed by Engr-in- charge. |
| 91 | 5.50mm tinted/frosted glass, selected quality and glazing with rubber neoprene packing for doors/windows in re/rectangular exc 0.5 sq. m in each pane included all connected accessories, complete all as specified and directed by Engr-in- charge. |
| 92 | 4 mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed by Engr-in- charge. |
| 93 | S & F in repair 32 mm dia waste coupling of PTMT (half or full threaded) (minimum weigh 45 gms), complete all as specified and directed by Engr-in- charge. |
| 94 | 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15 mm dia 450 mm long PVC connection with PTMT waste coupling (fixed in repair), complete all as specified and directed by Engr-in- charge. |
| 95 | PVC connection suitable for 15 mm pipe with PTMT nuts and washers for both ends of length 450 mm long, (fixed in repair), complete all as specified and directed by Engr-in- charge. |
| 96 | S&F stainless steel grating doom 100mm dia with or without hole, complete all as specified and directed by Engr-in- charge. |
| 97 | S & F 110mm bore PVC (SWR) pipes signle socketed, in any length with rubber ring joints, laid in trenches or in floor inluding taking down existing old pipes, complete all as specified and directed by Engr-in- charge. |
| 98 | Description all as per Ser item No 91.00 here-in-before but bore of pipe 75mm, complete all as specified and directed by Engr-in- charge. |
| 99 | S & F 110mm bore PVC (SWR) pipes signle socketed, in any length with rubber ring joints, fixed in walls inluding taking down existing old pipes, complete all as specified and directed by Engr-in- charge. |
| 100 | S & F 75mm bore PVC (SWR) pipes signle socketed, in any length with rubber ring joints, fixed in walls inluding taking down existing old pipes, complete all as specified and directed by Engr-in- charge. |
| 101 | S&F for 110mm PVC (SWR) bends any radius, complete all as specified and directed by Engr-in- charge. |
| 102 | S&F for 75mm PVC (SWR) bends any radius, complete all as specified and directed by Engr-in- charge. |
| 103 | S&F for 75mm dia outlet PVC(SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed by Engr-in- charge. |
| 104 | S & F in 15mm dia pillar taps, single lever basin without popup waste with 450mm long braided hoses, complete all as specified and directed by Engr-in- charge. Make- Hindware cat part no-10051BPM or Jaguar as approved by GE. |
| 105 | Vitreous China urinals fixed in repairs, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushingcistern, trap and waste pipe, complete all as specified and directed by Engr-in- charge. Make - Hindware(starwhite) cat part No-96008 Size 28x34.5x69 cm or Jaguar as approved by GE. |
| 106 | Supply and fix in repairs Vitreous China wash basin with matching pedestal, white, flat back, size 550x400mm, including cutting for and pinning in ends of brackets or erecting stand but inclusive of fixing of supply waste pipe complete all as specified and directed by Engr-in- charge. |
| 107 | Taking down the existing aluminium door/window Ventilator frame with shutters exc.1.5 sqm each incl all accessories and making good the disturbed portion, complete all as specified and directed by Engr-in- charge. |
| 108 | M&L for window/ventilator Powder coated (50 - 60micron) Glossy finish (of approved color) aluminium sliding window of any shade with frame of section 100mm x 45mm ,thickness of sheet 16 gauge , including sliding shutter (High-density Red Nylon or Stainless Steel Roller wheel of each shutter) & (EPDM gaskites fitted in slote of each Glazed window shutter for air lock) with shutter of section 32mm x 15mm (with and including Triple Track and 2 Nos Glazed Shutter and 01 No Gauzed Shutter) including Stainless Steel wire mesh, rubber gasket for securing the glass, 5.50 mm thick Tinted/frosted glass and necessary Aluminium moongreies and Designer/modern handles, locks, complete all as specified and directed by Engr-in- charge. |
| 109 | M&L for Powder coated 50-60 micron (Gloss finish (of approved color) aluminium door frame/partition of any shade with shutter (EPDM gaskites fitted in slote of each door shutter for air lock) of section 100mmx 45mm, thickness of sheet 3mm , partly panelled shutter and partly glazed lock rail / bottom rail of shutter 100mm x 45mm, top rail 80mm x 45mm including necessary jointing cleats, anodized aluminium including necessary fittings and aluminium mongeries i.e. 200mm long two Nos aluminium handles, 02 No, 200mm long aluminium tower bolt in each leaf, rubber gasket for securing the glass and 3 Nos 100 mm long butt hinges with each including 5.50 mm thick tinted/frosted glass/12 mm thick Prelaminated Particle Board including mortice lock, hydraulic door closure/floor door spring to each shutter, complete all as specified and directed by Engr-in- charge. Note :- hydraulic door closure/floor door spring measory and paid seperately. |
| 110 | Powder coated 50-60 micron (Gloss finish (of approved color) aluminium decoril (decorative safety grills) (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved aluminium Powder coated standard section around the opening, all complete as per requirement and direction of Engineer in-charge. |
| 111 | S&F in repair Aluminium (Diecast) body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width & of weight between 61 to 80kg, complete all as specified and directed. |
| 112 | S&F in repair Aluminium (Diecast) body Door closer hydraulically regulated, Designer Hydraulic Door Closer Adjustable closing speed durable designation No 3, universal type, suitable for door shutters of 200 to 400mm mm in width & of weight between 1.50 to 3.00kg, complete all as specified and directed by Engr-in- charge. |
| 113 | Mild steel PVC powder coated (coloured) curtain rod with fixing side brackets, end cups, rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs, complete all as specified and directed by Engr-in- charge. |
| 114 | Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation board/slab of any description including cover fillets and removal from the site complete all as specified and directed by Engr-in- charge. |
| 115 | Supply and fix powder coated Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurledweb of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed by Engr-in- charge. |
| 116 | Supply and fix hangers 6 mm dia GI (n.exc 1200 mm in length apart) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and directed by Engr-in- charge. |
| 117 | Material and labour for Non asbestos fibre cement building boards (E-board classic designer) fixed or laid/ inserted toGI framework with screws complete all as specified and directed by Engr-in- charge. |
| 118 | Supply and fix interior decorative cavity/hollow PVC ceiling panels/planks of interlocking types, thickness exc 8mm and width n.exc 255mm with colour texture/shade as approved incl necessary trims where reqd fixed with hidden screws to GI seamless framework complete all as specified and directed by Engr-in- charge. |
| 119 | Providing and fixing GI frame work including 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface sunk or raised moulding over metal frame work and reinforced with G.I. wire mesh including one coat of putty and two coats of paint, shades as approved by GE, including taking down complete all as specified and directed by Engr-in- charge. |
| 120 | Solid PVC wall lining consisting of 5mm thick lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing as per specified in MES schedule part-II, incl taking down complete all as specified and directed by Engr-in- charge. |
| 121 | S&F 25mm thickness lnsulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing as per specified in MES schedule part-II, complete all as specified and directed by Engr-in- charge. |
| 122 | All as per item no. Above but 25mm thickness PVC Insulated Panel with wood grain printed PVC sheet used instead of plain colour sheet.as per specifications and drawing as per specified in MES schedule part-II, complete all as specified and directed by Engr-in- charge. |
| 123 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing as per specified in MES schedule part-II, complete all as specified and directed by Engr-in- charge. |
| 124 | S&F 18-19 mm thick pre-laminated particle board, exterior grade, pre-laminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by Engr-in- charge. |
| 125 | S&F continuous (Piano) hinges, mild steel bright finish or electro galvanized (width of flap when open 30mm) ISI marked complete all as specified and directed by Engr-in- charge. |
| 126 | Supply only heavy duty Slim Nickel plated Stainless steel magnetic catch (L shape) with strong earth magnet, size 11mm x 35mm x 4mm complete all as specified and directed by Engr-in- charge. |
| 127 | Supply only heavy duty stainless steel slip on hinges, self closing type with opening full overlay or 105°, suitable for 25mm thick shutter of maximum size 850mm x 550mm complete all as specified and directed by Engr-in- charge. |
| 128 | Supply only Ergonomically designed powder coated Aluminium anodised handle, finger pull type, suitable for 19mm thick shutter, size 14mm x 43mm complete incl finish as approved, complete all as specified and directed by Engr-in- charge. |
| 129 | Supply and fix Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed by Engr-in- charge. |
| 130 | M &L Second classhard-wood as in chowkhat Clean sawn Timber fixed in wall/ceiling as per specified in MES schedule part-II, complete all as specified and directed by Engr-in- charge. |
| 131 | M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of anti-fungal acrylic emulsion paint (Appex) any tinted, complete all as specified and directed by Engr-in- charge. |
| 132 | Supply and fixing factory made uPVC white/ivory colourThree track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & sizeaccording to uPVC profile), |
| 133 | appropriate dimension of uPVC extruded glazing beads and uPVC extrudedinterlocks, EPDM gasket, wool pile, zinc alloy (white/ivory powder coated 50 micron ) touch locks with hook, zinc alloy bodywith single nylon rollers (weight bearing capacity tobe 40 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steelscrews etc. Profile of frame & sash shall be mitred cutand fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of wateretc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealent over backer rod of required sizeand of approved quality, complete all as specified and directed (Glass or wiremesh shall be paid separately)Note for Ser Item No 132 : For uPVC frame and sash extruded profilesminus 5% tolerance in dimension i.e. in depth widthof profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made |
| 134 | Providing and fixing made uPVC white colour casement (sliding/Openable) Door (floor and necessary fitments reqd for floor spring, etc) made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame(60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of ardware.EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), Tprofile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x100mm long fasteners.Hardware: [casement door handle made of zinc alloyed (whitepowder coated).Corner striker. Secondary Strikers. Cylinder Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed(white powder coated) [and 5mm thick glazing with selected quality glass, complete all as specified and directed by Engr-in-charge. |
| 135 | (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) |
| 136 | Supply and fixing factory made uPVC white colour fixed glazed ventilator made of (small series)frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame andn mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mildsteel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic aps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixingframe the gap between frame and adjacent finishe dwall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). |
| 137 | Note : For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. indepth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this accountshall be made |
| 138 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. Complete all as specified and directed by Engineer-in-Charge. Make- National/ Neelkanth or comet international |
| 139 | S & F, Sink made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , nlcudingbedding in cement mortar to dwa rf wall or including fixing cantilever brackets, PVC waste pipe and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm 160mm , fixed in repair Complete all as specified and directed by Engineer-in-Charge.Make: Prayag |
| 140 | S&F in repairs Brass CP shower rose 125mm size, Complete all as specified and directed by Engineer-in-Charge. |
| 141 | S&F in repair PVC tank cover suitable for tanks 500 & 1000 Ltrs tank incl securing with MS binding wires, Complete all as specified and directed by Engineer-in-Charge. |
| 142 | Corner Glass self ( With CP brakets) 225 x 225 mm, Complete all as specified and directed by Engineer-in-Charge.Make-Jaquar / Cera- |
| 143 | Glass shelf assembly consisting of 5.5mm thick sheet glassshelf 12cm wide with chromium plated brackets, guard and railing 60cm long fixed in repair, complete all as specified and directed by Engr-in-charge. Make-Jaquar , Cera-F 5001114 |
| 144 | M&L for repairing of RCC projections, chajjias, roofs, facia etc by necessary preparation. Scarpping, cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.,C.C surfaces with cement concreat (1:1.5:3) using 12.5mm graded crushed stone aggrigates and reinforcement with welded mesh (If Reqd) of weight exc 2 kg per sqm but n.exc 3kg/sqm with or without facia and finished with cement and sand motar (1:3) using coarse sand and work in patches area n.exc 5 sqm each and thickness of R.C.C member n.exc 70mm including necessary form work and applying two coats of finishes to match with the existing surfaces in at any height Complete all as specified and directed by Engineer-in-Charge. |
| 145 | Uprooting of trees, grass bushes etc from brick wall/roof/ other Part of building including dismantling the required brick work/ roof tiles /mud/concrete etc for uprooting the vegetation etc and make good the same to match with existing surface with same material or concrete 1:2:4 after pouring the chemical (Which destroy the growth of vegetation to the place where vegetation remove.The rate for scaffolding or any other arrangement required during this process upto 10 mtr height included, Complete all as specified and directed by Engineer-in-Charge. |
| 146 | Supply and fix Floor door stopper of aluminium alloy body and tongue, anodised, 140 mm with hard drawn steel spring, fixed in floor Complete all as specified and directed by Engineer-in-Charge. |
| 147 | Supply only 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers Complete all as specified and directed by Engineer-in-Charge. |
| 148 | Supply and fix 25mm dia heavy duty stainless steel curtain rod (SS-304), cut in required length and size to fit with opening incl fixing in bracket with necessary screws fitted on bracket and decorative nobs on sides with necessary arrangement Complete all as specified and directed by Engineer-in-Charge. |
| 149 | Supply and fix 125mm long curtain rod side brackets of stainless steel (SS 202), angular or cantilever type fixed to wall with 02 nos screws on each bracket and fitted screws for fixing curtain rod incl stainless steel (SS 202) decorative design plain metal colour nobs (oval/shere shape) with fixing arrangement for curtain rod using a screw Complete all as specified and directed by Engineer-in-Charge. |
| 150 | Supply and fix 20 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape complete to walls and ceilings or laid in floors including all connected brass CPVC fittings and cutting grooves, filled with CM 1:6 as in repair Complete all as specified and directed by Engineer-in-Charge. |
| 151 | Cutting chases in brick wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth Complete all as specified and directed by Engineer-in-Charge. |
| 152 | Supply and fix 25 mm outer dia CPVC pipes SDR 11 and plain CPVC SDR 11 fittings, concealed joint with CPVC adhesive taflon tape in any requirement complete to walls and ceilings or laid in floors iincluding all connected brass CPVC fittings and cutting grooves, filled with CM 1:6 Complete all as specified and directed by Engineer-in-Charge. |
| 153 | Supply and fix Brass CP 3 in 1 Wall Mixer for mixing hot & Cold water screwed down for iron pipe and fixed and joint with adhesive, taflon tape, etc complete incl taking out old CP Bib cock tap, Complete all as specified and directed by Engineer-in-Charge.Make: Prayag Cat No. 7375 or equivalent |
| 154 | Supply and fix chromium plated Self-closing taps Pillar taps (suitable size for 20mm outer dia CPVC pipe), cast copper alloy, screwed down high pressure, with long screwed shanks and fly-nuts, complete incl fixed in repair, Complete all as specified and directed by Engineer-in-Charge. |
| 155 | Supply and fix Brass CP Sink Mixer with movable neck, fixed to wall, for mixing hot & Cold water screwed down for iron pipe and fixed and joint with adhesive, taflon tape, etc complete incl taking out old CP Pillar tap, Complete all as specified and directed by Engineer-in-Charge.Make: Prayag Tranquil Cat No. 7355 or equivalent |
| 156 | Hydraulic operated Floor door spring, size 256 x 105 x 50mm with adjustable latching and closing speed, mechanical hold open 90 degree, made out of high grade CI body housed in GI steel box with high corrosion resistant SS-304 coverplate, thermostable hydraulic fluid filled to ensure smooth operation in any climate, Complete all as specified and directed by Engineer-in-Charge.(Make : Godrej or equivalent) |
| 157 | Supply and fix Brass chromium plated glossy Tubular towel ring, square/rectangular shape, fixed with SS-304/brass screws Complete all as specified and directed by Engineer-in-Charge.Make : Prayag SAGA Cat No. BA-31 or equivalent |
| 158 | Supply and fix in repair Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed with SS-304/brass screws Complete all as specified and directed by Engineer-in-Charge. |
| 159 | Supply and fix Brass chromium plated glossy soap dish, oval dish shape, fixed with SS-304/brass screws Complete all as specified and directed by Engineer-in-Charge.Make : Prayag SAGA ROUND Cat No. BA-45 or equivalent |
| 160 | S&F Telescopic channels ( exc 300mm not exc 500mm) complete all as specified and directed including all nececssary stainless steel self driving screws complete all as specified by manufacturers instruction. |
| 161 | S&F handles of stainless steel (asper 3D designs) incl all connection fitting complete all as specified and directed including all nececssary stainless steel self driving screws complete all as specified by manufacturers instruction. |
| 162 | S&F self closing stainless steel hinges for cupboards and drawers incl all connection fitting/screws including all nececssary stainless steel self driving screws complete all as specified by manufacturers instruction. |
| 163 | PVC body toilet cabinet ( Make Parayag) (box type) 600x450mmx125mm size with mirror of selected quality glass having 5.5mm thickness and fixed to walls with screws and wooden/rawl plugs Complete all as specified and directed by Engineer-in-Charge. |
| 164 | E/M Portion:-Taking down carefully alu./copper point wiring ,light fan socket, or power complete with fittings such as switches ceiling rose;holders; regulators, socket etc removing material to store for keeping in safe custody for reuse or disposal by credit and marking good to disturbed surfaces of walls floors etc, complete all as specified and directed by Engr-in-Charge. |
| 165 | M & L for concealed point wiring with FRLS grade PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC concealed conduit for fixing of switches, sockets,light, fan regulators etc for the following, complete all as specified and directed by Engr-in-Charge. |
| 166 | One light/fan/bell point or one fan point controlled by one switch |
| 167 | One 3/5 pin socket outlet, 5 Amp independent |
| 168 | One socket outlet 5 Pin, 5 Amps, SP on same board. |
| 169 | One socket outlet 6 pin 6/16 Amps, indipendent with cables 2.5 sqmm size . |
| 170 | One light point point controlled by 2-way switches with cables 1.5 sqmm size. |
| 171 | M & L for wiring with FRLS grade PVC insulated unsheathed multistranded copper conductor cables in PVC casing caping of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm for fixing of switches, sockets,light, fan regulators etc for the following complete all as specified. |
| 172 | One light/fan/ /bell point or one fan point controlled by one switch |
| 173 | One 3/5 pin socket outlet, 5 Amp independent |
| 174 | One socket outlet 5 Pin, 5 Amps, SP on same board. |
| 175 | One socket outlet 6 pin 6/16 Amps, indipendent with cables 2.5 sqmm size . |
| 176 | S&F Piano type switch one way 6 Amps , 240 Volt, ISI marked, complete all as specified and directed by Engr-in-Charge. |
| 177 | S&F Bell push,flush type, one way 6 Amps , 240 Volt ,ISI marked, complete all as specified and directed by Engr-in-Charge. |
| 178 | S&F Switch Piano type single pole 15Amps one way 240 Volt, ISI marked, complete all as specified and directed by Engr-in-Charge. |
| 179 | S&F Switch 6 amp, 2 way, 240 Volt ,ISI marked , complete all as specified and directed by Engr-in-Charge. |
| 180 | S&F socket outlet 2 in 1,3/5 pin piano type 5 Amp flush type ISI marked complete |
| 181 | S&F socket out let 6 /16 Amps 6 pin flush type , complete all as specified and directed by Engr-in-Charge. |
| 182 | S&F switch socket combination 2 in 1, 6 Amps flush type, complete all as specified and directed by Engr-in-Charge. |
| 183 | S&F switch socket combination 2 in 1, 3 pin, 6 and 16 Amps flush type universal, complete all as specified and directed by Engr-in-Charge. |
| 184 | M & L for modular white cover plate with frame 8 module, complete all as specified and directed by Engr-in-Charge. |
| 185 | M & L for modular white cover plate with frame 6 module, complete all as specified and directed by Engr-in-Charge. |
| 186 | M & L for modular white cover plate with frame 4 module , complete all as specified and directed by Engr-in-Charge. |
| 187 | M & L for modular white cover plate with frame 3 module, complete all as specified and directed by Engr-in-Charge. |
| 188 | M & L for modular white cover plate with frame 2 module, complete all as specified and directed by Engr-in-Charge. |
| 189 | M & L for modular white cover plate with frame 1 module, complete all as specified and directed by Engr-in-Charge. |
| 190 | S&F Modular switch one way 6 A,1 module 240 Volt, ISI marked, complete all as specified and directed by Engr-in-Charge. |
| 191 | S&F Modular Bell push,one way 6 A, 1 module, 240 Volt ,ISI marked, complete all as specified and directed by Engr-in-Charge. |
| 192 | S&F modular Switch single pole 16A one way, 1 module 240 Volt, ISI marked, complete all as specified and directed by Engr-in-Charge. |
| 193 | S&F modular Switch 10 amp, 2 way, 1 module, 240 Volt ,ISI marked, complete all as specified and directed by Engr-in-Charge. |
| 194 | S&F modular socket 3 pin 6Amp 2 module ISI marked, complete all as specified and directed by Engr-in-Charge. |
| 195 | S&F modular socket out let 6 /16 Amps 3 pin, 2 module, complete all as specified and directed by Engr-in-Charge. |
| 196 | S&F ceiling rose surface backlite 65 x 20mm size three terminal ISI marked, complete all as specified and directed by Engr-in-Charge. |
| 197 | S&F Lamp holde PVC type with back plate suitable for batten fittings, complete all as specified and directed by Engr-in-Charge. |
| 198 | S&F of electronic step type regulator of capacity 240 volts flush type ISI marked, complete all as specified and directed by Engr-in-Charge. |
| 199 | S& F Bell, AC, 230 volts, single pole, complete all as specified and directed by Engr-in-Charge. |
| 200 | S&F in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings, complete all as specified and directed by Engr-in-Charge. |
| 201 | S&F in replacement LED lights fitting 1x 20W, 220V,AC Inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings, complete all as specified and directed by Engr-in-Charge. |
| 202 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings, complete all as specified and directed by Engr-in-Charge. |
| 203 | S&F in repair slim surface mounted 12 watt LED panel with premium diffuser to ensure glare free & even light distribution, complete all as specified and directed by Engr-in-Charge. |
| 204 | S&F in replacement LED light fitting 1 x 9 W/ 1 x 10 W Bulk head luminaires complete making all connection using 1.5 sqmm copper conductor multistrandard PVC insulated 2 core flexible cable with flexible PVC pipe from ceiling rose to fittings, complete all as specified and directed by Engr-in-Charge. |
| 205 | S&F in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 4.0Sqmm PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including 4.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly, complete all as specified and directed by Engr-in-Charge. |
| 206 | S&F in replacement of sub main wiring with copper conductor cable (2 runs of cable) multistaranded 6.0 Sqmm PVC ISI marked with all insulated unsheathed in and including PVC concealed conduit 25mm dia medium grade fittings including 6.0 Sqmm copper conductor cable PVC insulated unsheathed multithreaded using as continues earth wire connected to common earth and earth dolly, complete all as specified and directed by Engr-in-Charge. |
| 207 | M&L for earthing in repair complete with galvanized steel earth electrode 60cmX60cmx6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5m below normal ground level connected to earth lead by means of bolts nuts and washers of GI steel and including earthing pit charcoal, common salt, GI 4.0mm dia lead wire 20mm GI medium grade watering pipe 15mm bore light grade protection pipe 5 Mtr length with wire mesh and funnel PCC pit in PCC 1:2:4 type B-1 using 20mm graded stone aggregate, angle iron frame and RCC cover and earth work complete all as shown in electrical plate No.3 of SSR -2009(Part-1), complete all as specified and directed by Engr-in-Charge. |
| 208 | S&F TPN Distribution board vertically with provision for TPN DB including MCCB 100 Amp, 16 kA,as incomer in 4 way TPN DB double door IP-43 protection including all PCC & cementing work for installation of TPN DB to wall, complete all as specified and directed by Engr-in-Charge. |
| 209 | S&F Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces, complete all as specified and directed by Engr-in-Charge. |
| 210 | S&F Sheet metal enclosure factory made for DBs single pole and neutral single door 240 volts 12 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing, and commissioning and making good of wall, surfaces, complete all as specified and directed by Engr-in-Charge. |
| 211 | S&F Sheet metal enclosure factory made for DBs single pole and neutral single door 240 volts 2 way, complete all as specified and directed by Engr-in-Charge. |
| 212 | S&F MCB single pole and neutral, 240 Volts , 50 Hz 10 Ka, 40 to Amps, 30mA, complete all as specified and directed by Engr-in-Charge. |
| 213 | S&F MCB single pole 240 Volts , 6 to 20 Amps , complete all as specified and directed by Engr-in-Charge. |
| 214 | Taking down ceiling fan sealing cable end etc and shifting to store complete and rehanging the same after overhauling and with white synthetic enamel paint(two coat) with the help of spray gun and connecting with three core flexible copper conductor cable 0.75 sq mm, complete all as specified and directed by Engr-in-Charge. |
| 215 | Description all as per Ser item No 201.00 here in before but for exhaust/cabin fans of any size/make, complete all as specified and directed by Engr-in-Charge. |
| 216 | S& F in repair PVC connection 15 mm size with PTMT nuts of length 300 mm , complete all as specified and directed by Engr-in-Charge. |
| 217 | S& F in repair PVC Rectangular block for switches,socket, fan regulator 3 mm thick plastic laminated sheet cover of size 100mm x 100 mm and 50 mm deep, complete all as specified and directed by Engr-in-Charge. |
| 218 | Checking,servicing, oiling and greasing of fan of any size/type by using appropriate grade of oil /grease and replacing defective parts such as bush, bearing, split pin, rubber bush, hanging clamp and capacitor etc including cleaning complete all as specified and as directed by Engineer- in -Charge (Note|-Parts/components will be measured and paid seperately under their respective items) |
| 219 | Rewinding of celling fan 1200/1400mm sweep, AC, 230 volts single phase with super enamelled copper winding wire of appropriate size including packing, insulating material, soldering, varnishing, reassembling and testing as required, making functional, complete all as specified and directed by Engr-in-Charge. |
| 220 | Nuts, bolts and washers of appropriate size for hanging of celling fan, complete all as specified and directed by Engr-in-Charge. |
| 221 | Top / botton canopy of required size with tightening screws, complete all as specified and directed by Engr-in-Charge. |
| 222 | Bearing of celling fans for 1200/1400mm sweep suitable for different makes /type of fans, , complete all as specified and directed by Engr-in-Charge. |
| 223 | Ball bearing suitable for exhaust fan 300mmsweep of different make, complete all as specified and directed by Engr-in-Charge. |
| 224 | Split pins of galvanished iron 1/8\\" dia, 2\\" length , complete all as specified and directed by Engr-in-Charge. |
| 225 | Rewinding of exhaust fan 300mm sweep AC 230 volts single phase with super enameled copper wire of appropriate size including packing insulating material, soldering, varnishing , reassembling , testing and making functional, , complete all as specified and directed by Engr-in-Charge. |
| 226 | Condenser/capacitor suitable for 230 volts singls phase celling fan 1200mm/1400 sweep of approved make and quilty of capacity 2.5 MFD, complete all as specified and as directed by Engineer-in-Charge. |
| 227 | Description all as per ser item No 213.00 here in before but for 3.15 MFD. |
| 228 | Description all as per ser item No 213.00 here in before but 4 MFD for Exhaust Fan |
| 229 | Dismantling of geyser from its location, 25/35/50Ltrs capacity for checking, test and making leak proof by means of welding of tanks, replacement of parts, under item here in after and to make serviceable and re-assembling, including packing of glass wool properly, replacement of worn out nut, bolts, washers, screws as reqd, applying one coat of synthetic enamel paint including testing and re installation/ refixing, complete all as specified and directed by Engr-in-Charge. Note : New items provided shall be meaured and paid under relevent item of Sch. |
| 230 | Apparatus plate heavy duty, rubber gasket suitable for 25/35/50 Ltr of geyser, complete all as directed by Engr-in-Charge. |
| 231 | Geyser element 2 KW, ISI Marked Make :-Bajaj Calenta, complete all as specified and directed by Engr-in-Charge. |
| 232 | Geyser thermostate switch ISI Marked, complete all as specified and directed by Engr-in-Charge. |
| 233 | Geyser thermostate switch ISI Marked, complete all as specified and directed by Engr-in-Charge. |
| 234 | Geyser indicator lamp red colour for heating and green colour for cut off, complete all as specified and directed by Engr-in-Charge. |
| 235 | Geyser Non return valve 15mm dia pipe CP brass, ISI marked, complete all as specified and directed by Engr-in-Charge. |
| 236 | Geyser Pressure release valve ISI marked, complete all as specified and directed by Engr-in-Charge. |
| 237 | Descaling of gyser tanks of capacity 25/35/50 Ltrs by using suitable powder/ chemical, up to the satisfication of engineer in charge, complete all as specified and directed by Engr-in-Charge. |
| 238 | Suppy and fixing ceiling fans complete with blades, down rods,elecctonic regulators and accessories, 230 V, 1200 mm sweepvalue 6.00mm BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed by Engr-in-Charge.Note - Old fans deposited in MES Stores. |
| 239 | S&F LED Lamp 9 Watt inverter type and backup time upto 4 hrs suitable for lamp holder, complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
