|
| 1 | S&F Pre- painted green colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of green colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as directed. |
| 2 | S&F MS angle/Tee/Hollow tublar section as in column, main or cross beams, hip and jack rafter, purlins, roof trusses (framed) where connected to common rafters and etc conforming to Fe-290 Gde E-165 all as directed by Engr-in-charge |
| 3 | Excavating in post holes soft/ loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, |
| 4 | M & L PCC 1:3:6 type C2 (using 40 mm graded aggregade ) in foundation for post holes. |
| 5 | M&L for preparation of new untreated steel or iron surfaces of any description over 10 Cm width or girth not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer. |
| 6 | M&L for 300x300x25mm thick (M-35) glossy finish polished red color Chequered cement concrete tile of any pattern as decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed in cement mortar 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile completel as specified and directed. |
| 7 | M& L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering |
| 8 | M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface in broken stone or boulders |
| 9 | M&L for PCC 1:4:8 type D-2, (using 40 mm graded crushed stone aggregate) as in foundation, filling, mass concrete and sub base of floor complete all as specified and directed |
| 10 | S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . |
| 11 | S& F Factory made single extruded WPC (Wood Polymer Composite) solid Molded flush door shutter both side laminated of 24mm thickness size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 12 | S& F Factory made extruded WPC (Wood Polymer Composite) Double Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . |
| 13 | S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately)Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . |
| 14 | S& F Factory made 35 mm thick single extruded WPC (Wood Polymer Composite) solid Moulded Flush Door Shutter with both side laminated of required size with 2.4 or 6 rised panel design on front side with 10mm deep mould on single side with grain texture of comprising of virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 15 | M&L 35mm thick factory made solid WPC (Wood plastic composit) semi gauged door shutter with both side lamination, single pieces minimum density of 600 kg/cum with wire mesh in any number of division with (Frame size middele or lock rail rail 150mm to 250mm wide, Stiles, top and freeze rails 100 to 120 mm wide and glazing bar 75 mm wide, including stainless steel wire mesh shall be fixed with 15 mm MS Square tube and covered with PVC moulded bedding in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again of the shall be as per manufacture instruction complete all as specified and directed. |
| 16 | S&F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed |
| 17 | S&F Steel window factory made with centre hung shutter including hinges and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 158 1/2 to 2/2 complete all as specified and directed |
| 18 | M&L for box type Steel ventilators with top hung shutter including hinges, steel hook & eye complete all as specified and directed |
| 19 | Mild steel door shutter two leaves with frame of 1 mm thick MS steel (all around) and leaves of 1.00 mm thick MS steel all as per Godrej Pattern with three way locking arrangement with brass lock and C P handle with duplicate keys including two costs of spray painting over a coat of red oxide primer complete in existing cup boards fixed with necessary nut bolts including embedding in PCC 1;2;4 incl taking down existing chowkhats or frame with shutters complete all as specified and directed Note.- Area of opening shall be measured |
| 20 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each. |
| 21 | Taking down chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each with shutter (without taking off shutters from the frame. |
| 22 | S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed |
| 23 | S&F 3 mm thick sheet glass ordinary quality type & glazing with wooden beads in squares not exc 0.5 Sqm in each pan, complete all as directed. |
| 24 | S & F 3 to 4 mm thick frosted glass, ordinary quality and glazing with oil putty in square of any size pane and fixed all as specified. |
| 25 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed |
| 26 | S&F 100 mm size butt hinges medium weight stailess steel complete all as specified and directed by Engineer-in-Charge. |
| 27 | S&F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed. |
| 28 | S&F Alumnium anodised barrel tower bolt 200 mm long extruded section |
| 29 | S&F Extruded aluminium alloy handle 150 mm long fabricated type anodised |
| 30 | S&F, Floor door stopper of aluminium alloy body and tongue, anodised, with hard rubber bush fixed in repair in door, complete all as specified and directed |
| 31 | S&F 15mm bore long bib tap chromium plated with wall flange and aerator fixed complete all as specified and directed. |
| 32 | S &F 15 mm dia concealed stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron or for union complete all as specified and directed. |
| 33 | S & F 15 mm dia fancy Type CP angle valves cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron or for union. |
| 34 | Supply and fixed PVC low level flushing cistern 10 Ltr capacity symphonic action type white as approved, ball valve float valve and handle incl bracket complete. |
| 35 | S & F PVC connection 15 mm size with PTMT nuts of length 600 mm |
| 36 | S & F cast iron body Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 37 | S & F for 600mmx450mm bevelled edge mirror 5.0 mm thick of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 38 | Supply and fixed vitreous china wash hand basin, white size 450x300mm incl bracket, waste coupling and waste pipe 32 mm dia complete of approved make. |
| 39 | Supply only brass CP pillar taps 15mm bore with capstan head, screwed down high pressure with orwithout lettered hot or cold with long screwed shanks and fly nuts, screwed to iron pipe |
| 40 | S & F in repair brass chrominium plated tubular towel rail 20mm dia ,D type, 60cm long between flanges complete all as specified and directed of approved make. |
| 41 | S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed of approved make. |
| 42 | S&F in repair chromium plated brass shower roses with or without swivel joints, any shower Arm complete all as specified and directed by EIC. |
| 43 | Supply and fixed in repair CP grating 100 mm dia complete all as specified and directed. |
| 44 | M&L for green marble work 18 to 20mm thick (table rubbed and polished) in cooking platforms, flooring ,skirting ,window cill & stepes and including 15mm thick screed bed / rendering in CM 1:6 complete |
| 45 | Supply and fixed in repair of vitreous china squatting pan 'Orissa pattern' size 580 x 440 mm white with integral foot rest including replacement of 'P' or 'S' CI trap, concrete bedding and making good floor complete all as specified and directed. |
| 46 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed. |
| 47 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with MS clamp including taking down existing pipes complete all as directed. |
| 48 | S&F PVC (SWR) bends with access door in any radius 110mm bore complete all as specified and directed |
| 49 | S&F PVC (SWR) bends with access door in any radius 75mm bore complete all as specifed and directed |
| 50 | S & F PVC (SWR) reducers 75mm bore complete all as specifed and directed |
| 51 | S & F PVC (SWR) floor trap 100mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed. |
| 52 | S & F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement fixed in repair complete all as specified and directed. |
| 53 | S & F PVC (SWR) vent cowl 110 mm dia fixed in repair complete all as specified and directed. |
| 54 | S & F 15mm Ball valves highpressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20mm-210gms./25mm-455gms/ 40mm- 690 gms) fixed in repair complete all as specified and directed. |
| 55 | M&L for DWC (Double wall coruggated) HDPE pipes of size 150mm (ID) confirming to IS 16098 Part-II of strength/ stiffness class SN 8 laid in trenches on concrete bed to level/ gadient, jointing as per manufacturers instructions including jointing accessories as required complete all as specified and directed. |
| 56 | 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed |
| 57 | Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubish off the premises complete all as specified and directed. |
| 58 | M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone agg) as in flooring 25mm thick etc complete all as specified and directed. |
| 59 | M&L for non skid ceramic coloured tiles 8 to 9mm thick (Square or rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. |
| 60 | Non skid ceramic coloured tiles 8 to 9mm thick (Square or rectangular) area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick backing in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing tiling including cement mortar bedding and removing rubbish off the premises complete all as directed. |
| 61 | M&L Glazed ceramic coloured tiles of size 450x300 x 7mm , as on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick rendring in CM 1:4 complete all as specified and directed. |
| 62 | M&L for non skid ceramic coloured tiles 8 to 9mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles including laying of 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. |
| 63 | S&F in repair kitchen sink (stainless steel) made up of stainless steel 1 mm thick sheet with plug wasters and wasted incl bedding in cement mortar on to dwarf wall or fixing cantilever brackets connecting union to pipe over all size 915x460mm, bowl size 410x330x160mm incl 32mm dia waste pipe complete all as specified and directed. |
| 64 | S & F Stainless steel curtain Rod Fancy type 25 mm Bore and 1mm thickness including a pair of brackets, fixed in repair complete all as specified and directed. |
| 65 | S&F Decorative fancy type Stainless steel finals ,fixed in repairs complete all as directed. |
| 66 | Demolition of old brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 67 | M&L for Brick work using sub class “B” bricks straight or curved on plan exc 6 metre mean radius built in CM 1:4 ( Old size brick) including demolition of old brick work complete all as specified and directed. |
| 68 | M&L for Brick work with sub class 'B' bricks (old size), straight or curved on plan to any radius in half brick thick wall built in CM (1:4) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed. |
| 69 | Taking down cement or cement lime plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. |
| 70 | M & L Rendering 15 mm thick on brick or concrete surface,Drain , Manhole etc in CM (1:4) , surfaces finish even and smooth without using extra cement complete all as specified and directed. |
| 71 | M&L Rendering 15mm thick on other then fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed. |
| 72 | Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed. (work to be carried upto a height of 7.50m high. |
| 73 | Prepration of new / scraped surface of wall / ceilling and applying 2 mm thick wall care putty in two coats as per manufactur instruction complete all as specified and directed. |
| 74 | M&L for applying two coats of weather proof exterior emulsion paint (Apex of Asian, weather coat of Berger) of ant tint over a priming coat on wall, chajjas, facia etc complete all as directed. |
| 75 | M&L two coat oil bound distemper over a coat of primer any tint on walls and ceiling complete all as specified in SSR Part I and directed by Engr-in-Charge. (Note : Applying coat after completion of wall surface treatment as per item No 72 as above and stage has to be passed by Engr-in-charge before laying coat complete all as specified and directed.) OBD to be applied from company approved applicator |
| 76 | M&L for 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe, cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) complete all as directed. |
| 77 | M&L for 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe,cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) complete all as directed. |
| 78 | Repairing to existing door/ window chajjas, roof slab bottom upto 3.0m span and width 1.0m by demolition/ scrapping of damaged portion and preparing the surfaces by providing 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including finishing the surface by rendering 10 mm thick plaster in CM 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering sliglitely rounded or chamfered angles and throating over and including priming newly plastered/concrete surface by applying one coat of primer, 2 mm thick acrylic damp proof wall care putty and applying two coat of Apex paint (Weather coat exterior paint) and complete making good existing disturbed surface all as specified and directed (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). Note: Reinforcement if required shall be measured and paid separately under respective. |
| 79 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 80 | M&L for RCC (1:1½:3) using 20mm graded crushed stone aggregate as in slab supported on walls beams and columns in floor, roof, landing and in shelves and the like including demolition of existing R.C.C complete all as specified and directed. |
| 81 | M&L for Precast RCC 1:2:4 Type B-1( using 20 mm graded crushed stone aggregate} as in cover slab, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set and jointed in CM 1:4 complete all as specified and directed. (Note: Reinforcement shall be measured and paid separately under respective items of this BOQ) |
| 82 | M&L for PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in surface channels and drains including demolition and taking out of existing cement concrete of any description complete all as specified and directed. |
| 83 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed. |
| 84 | Cutting into exisiting manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching and forming channels and reforming benching etc complete in PCC 1:2:4 type B1 smooth finish complete 150mm dia & up to 300 mm dia complete all as specified and directed. |
| 85 | M&L for cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) 75 mm thick as in plinth protection surface finished even and smooth without using extra cement. |
| 86 | M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in coping, benching, cills, PCC gola, holdfast and the like including weathering, slightly rounded or chamfered angles and throating, including necessary from work including demolition of existing old concrete etc complete all as specified and directed. |
| 87 | M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 88 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. flat rough finished surface of concrete |
| 89 | Demolition of reinforced cement concret roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work |
| 90 | S & F tripple layered ISI marked PVC water tank rotational moulded polythylone triple layer white water storage tank (cylindrical vertical with closed lid hoisted and fixed in position)above but 500 ltr capacity complete all as specified and directed by EIC. |
| 91 | S&F 18mm thick prelaminated colour WPC Board having base brown, minimum density of 600 kg/cum, for kitchen cabinet Shutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed. |
| 92 | S&F fixed 15 mm bore dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 93 | S&F fixed 20 mm bore dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe complete all as specified and directed. |
| 94 | S & F 4mm dia PVC Coated chain link Fencing of weight not less than 3.5 Kg/ Sqm made up into matresses or cages,lapped, wired and laid in position, including closing after filling complete all as specified and directed.Note ;- Size to be approved by Engr-in Charge as per site requirement. |
| 95 | S & F mild steel round bar 10 mm dia round bars cut to length, hooking ends securing of chain link fencing confirming to Fe-410-W 432 (Part I) (Gde.E-250) Part- I quality-A or Fe 290 (Gde - E-165) including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 96 | Excavation in post holes (similar holes) each n exc 0.5 cm getting out returning filling in and ramming earth or broken boulders mixed with earth around in layers not exc 25 cm watering and removing surplus soil to distance n exc 50 m and making good surface in hard / dense soil complete all as specified and directed |
| 97 | M&L for PCC 1:3:6 type C2 (using 40 mm graded aggregade ) in foundation for post holes. |
| 98 | Dismantling post or post struts (wood steel or RCC) any section, including taking out embedded portion and making good disturbed ground in natural ground. |
| 99 | S & F mild steel joints angle channel or tee section and fix independently in concrete as fencing post and similar works conforming to Fe 290 Gde E- 165 complete all as specified and directed |
| 100 | S & F mild steel screw bolts purpose made with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed to be fitted with washers and one hexagonal or square nut, exc. 22.5 cm but n exc. 30 cm long dia of shank 11 to 15mm. |
| 101 | M&L for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 102 | M&L for 18mm thick WPC Board having base brown, minimum density of 600 kg/cum, for kitchen cabinet Shutter/ drawer Front, cup board shutters, frame etc complete all as specified and directed. |
| 103 | S&F Continuous (piano) hinges, mild steel, bright finish or electro galvanised of flaps (When open) in 30mm. |
| 104 | S&F Stainless steel handles fancy type 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed. |
| 105 | S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs fixed in repair complete all as specified and directed. Make :Hexa, Hettich, Hafele |
| 106 | S&F Chromium plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 107 | S&F Chromium plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed |
| 108 | Chromium plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed. |
| 109 | S&F Chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304 with necessary fixing clips etc fixed in repair complete all as specified and directed.. |
| 110 | S&F Chrome plated stainless steel wire basket (Grain trolley) pull out type, size 480 x 500 x 200 mm Grade 304 with necessary sliding frame structure, fixing clips etc fixed in repair complete all as specified and directed.. |
| 111 | S&F Chrome plated stainless steel wire basket (Bottle pull out type) pull out type two self, size 120 x 500 x 432 mm Grade 304 with necessary sliding frame structure, fixing clips etc fixed in repair complete all as specified and directed.. |
| 112 | S & F Magnetic catcher suitable for cup board shutter fixed with scews in bath cabinet or similar situations, complete all as specified and directed |
| 113 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc. |
| 114 | Taking down existing old Ceilinf fan/Exhaust fan and deposit to MES yard of any size and capacity all as directed. |
| 115 | Taking down water heater of any capacity and deposit to MES store yard. |
| 116 | Taking down old U/S main switches, Sheet metal enclosures DB including MCCBs, MCBs etc including making good to the disturbed surface of wall all as directed. |
| 117 | Taking down old unsv T/L of any size and capacity all as directed. |
| 118 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed. Please Enable Macros to View BoQ information |
| 119 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed. Please Enable Macros to View BoQ information |
