|
| 1 | M&L 7 to 8 mm thick non skid coloured ceramic tiles (square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.16 sqm in floors etc, and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed in CM 1:6 and dismantling complete all as specified and directed |
| 2 | M&L glazed coloured ceramic tiles in vetical surfaces of size 450 x 300 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles and including laid over 10 mm thick backing coat in CM 1:4 and dismantling complete all as specified and directed |
| 3 | S&F in repairs, vitreous china squatting pan Orissa pattern of size 580 mm x 440 mm with integral foot rests (excluding flushing cistern and flush pipe) and including concrete bedding complete all as specified and directed. |
| 4 | S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device and including flush pipe of polythelene of low or density or PVC 32 mm dia for low level flushing cistern complete all as specified and directed. |
| 5 | S&F in repairs PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle and including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed. |
| 6 | S&F vitreous china wash basin, white, ovel shape size 550 x 400 mm and including fancy type chramium plated piller tap, CP stop cock, 450 mm long PVC connection, 32 mm waste coupling and pipe and including necessary cutting in granite slab for placing wash basin nosing edges complete all as specified and directed. |
| 7 | S&F in repairs vitreous china bowl urinal flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern & flush pipe) but excluding waste pipe, complete and including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and directed. |
| 8 | S&F in repairs 15 mm bore bib taps cast copper alloy fancy type, chromium plated finish with crutch or butter fly handle, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 9 | S&F in repairs 15 mm bore fancy type stop cock/ angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 10 | S&F in repairs 15 mm bore fancy type concealed stop valves / angle cock chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 11 | S&F in repairs 125 mm size brass chromium plated shower rose with arm or without swivel joints and including fixing to steel pipe or union fixed complete all as specified and directed. |
| 12 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 13 | S&F in repairs two way bib tap / cock 15 mm bore, chromium plated, fancy type complete all as specified and directed. |
| 14 | S&F 600 mm x 450 mm belvelled edge looking mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood with PVC / alluminium frame and fixed to wooden plugs with chromum plated brass screws, cup washers and including taking down complete all specified and directed. |
| 15 | S&F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook and including making connections and fixed in position complete all as specified and directed. |
| 16 | S&F PTMT shelf of weight not less than 300 gms with soap dish (tray) fixed with and including chromium plated brass screws and wooden / plastic cleats etc, complete all as specified and directed. |
| 17 | S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to wall complete all as specified and directed. |
| 18 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to wall complete all as specified and directed. |
| 19 | S&F 110 mm bore PVC (SWR) bends any radius 110 mm bore complete all as specified and directed. |
| 20 | S&F 110 mm bore PVC (SWR) bends with access door any radius complete all as specified and directed. |
| 21 | S&F 110 mm bore PVC (SWR) junction single (single T) equal or unequal with access door complete all as specified and directed. |
| 22 | S&F 110 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed. |
| 23 | S&F 110 mm bore PVC(SWR) vent cowl complete all as specified and directed. |
| 24 | S&F 75 mm bore PVC (SWR) bends any radious complete all as specified and directed. |
| 25 | S&F 75 mm bore PVC (SWR) bends with access door any radious complete all as specified and directed. |
| 26 | S&F 75 mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed. |
| 27 | S&F 75 mm bore PVC (SWR) junction single (single T) equal or unequal with access door complete all as specified and directed. |
| 28 | S&F in repairs PVC (SWR) floor trap 75 mm dia outlet, plain with grating and including jointing with solvent cement complete all as specified and directed. |
| 29 | S&F PVC waste pipe for Sink / WHB / urinal with fitting 38 mm dia, 60 cm long complete all as specified and directed. |
| 30 | S&F in repairs 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors and including provision of special fittings (unions, elbow, Tee, Male threaded brass adaptor, Female threaded brass adaptor, Tank adaptor etc), and cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, etc.& making good, cutting not exc. 10 cm grith complete all as specified and directed. |
| 31 | S&F in repairs 20 mm bore GI tubing medium grade with all fittings fixed to wall / ceiling or in floor complete as specified and directed. |
| 32 | S&F in repairs 25 mm bore GI tubing medium grade with all fittings laid in trenches, fixed to wall / ceiling or in floor complete as specified and directed. |
| 33 | S&F in repairs 50 mm bore GI tubing medium grade with all fittings laid in trenches complete as specified and directed. |
| 34 | S&F in repairs 20 mm bore gun metal gate valve with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed. |
| 35 | S&F in repairs 25 mm bore gun metal gate valve with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed. |
| 36 | S&F in repairs 50 mm bore gun metal gate valve with iron wheel head screwed both ends for iron pipe or for union complete all as specified and directed. |
| 37 | S&F in repairs 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of hoisted and fixed in position and including 20 mm ball valves high pressure of PTMT with epoxy coated aluminum rod & high-density plastic ball (minimum weight 20 mm - 210 gms) complete all as specified and directed. |
| 38 | M&L RCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in platform / shelves / cover slabs for manholes etc, set in CM 1:4 and including necessary form work and dismentling complete all as specified and directed. |
| 39 | M&L 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 40 | M&L mild steel TMT bars 10 mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 41 | All as per Sl. Item No. 40 above but 5 mm dia and over upto and including 10 mm dia in spacers, stirrups and binders complete all as specified and directed. |
| 42 | M&L brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in 1:4 using old size bricks and including demolition complete all as specified and directed. |
| 43 | M&L brick work with fly ash bricks, straight or curved on plan to any radius, built in CM 1:6 using old size bricks and including demolition complete all as specified and directed. |
| 44 | Taking down cement plaster of any description on brick or stone walls, roof plaster etc, and including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 45 | M&L 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 46 | M&L 15 mm thick rendering in CM 1:4 on surface other than fair face of brick work or stone masonry surfaces, finished even and smooth without using extra cement using WPC complete all as specified and directed. NOTE: WPC shall be measured and paid seperately. |
| 47 | M&L 5 mm thick rendering in CM 1:3 finished even and smooth without using extra cement in ceilings complete all as specified and directed. |
| 48 | Supply only integral water proofing compound complete all as specified and directed. |
| 49 | M&L preparation of new plastered wall surfaces and including applying three coats of white wash, complete all as specified and directed. |
| 50 | M&L preparation of newly plastered wall surfaces and including applying two coats of cement base paint over a coat of primer as per manufacturers instruction complete all as specified and directed. |
| 51 | M&L preparation of new plastered ceiling surfaces and including applying three coats of white wash, complete all as specified and directed. |
| 52 | M&L complete removal of existing treatment of old wall surfaces and including applying three coats of white wash, complete all as specified and directed. |
| 53 | M&L complete removal of existing treatment of old ceiling surfaces and including applying three coats of white wash complete all as specified and directed. |
| 54 | M&L complete removal of existing treatment of old wall surfaces and including applying two coats of cement base paint complete all as specified and directed. |
| 55 | M&L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and pigment, machine pressed, set jointed and pointed in neat cement slurry in floors and including laid over 15 mm thick screed r in CM 1:6 and dismantling complete all as specified and directed. |
| 56 | M&L 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection / hardstanding / sub base finishd even and smooth with out using extra cement and including demolition complete all as specified and directed. |
| 57 | M&L PCC type E-2, 1:5:10 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 58 | S&F double walled corrugated pipes of outer dia 160 mm and inner dia 136mm, SN-18 pipes confirming to IS 16205(Part 24- 2018)/ IS 14930 and including all necessary special fittings, cutting & jointing complete all as specified and directed. |
| 59 | Excavation in trenches not exceeding 1.5 m wide and not exc. 1.5 m depth for foundation etc, or for shafts, wells cesspits manholes pier holes, cables, pipe line etc, not exceeding 10 sqm on plan in hard / dese soil complete all as specified and directed |
| 60 | Returning filling in , including spreading n exc 25 cm thick, spread, levelled and rammed including watering. complete all as specified and directed. |
| 61 | Removal of excavated soil n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point. complete all as specified and directed. |
| 62 | Dismantling timber scantlings 40 Sqcm and over in section in any position, unframed work complete all as specified and directed. |
| 63 | S&F MS angle sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and drilling holes for existing wooden / steel angle rafter; fixed with angle cleats MS screw bolts necessary welding to purlins or other connecting plate of Grade Fe 410 -W (Gde- E- 250) quality- A etc.and including dismantling complete all as specified and directed. |
| 64 | M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and including applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 65 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile strength 550 mpa as in roof covering/ cladding to wall, fixed with self tapping screws and including dismantling complete all as specified and directed. |
| 66 | S&F pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 67 | M&L preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and including applying one coat of synthetic enamel paint complete all as specified and directed. |
| 68 | Taking down chowkats with shutters (without taking off shutters from the frame n. exc. 1.5 Sqm each complete all as specified and directed. |
| 69 | S&F 150 mm size extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 70 | S&F PVC door frame of size 50 mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube suppling fixing in opening etc, complete all as specified and directed. |
| 71 | M&L factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of mild steel tube for top and bottom rails, mild steel frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing at site as per specification and drawing complete all as specified and directed |
| 72 | S&F 100 mm butt hinges, extruded Aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-22 complete all as specified and directed. |
| 73 | S&F 150 mm aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 74 | M&L stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed withn wooden beading or with nuts and bolts to existing steel windows / wooden windows complete all as specified and directed. |
| 75 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed. |
| 76 | S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in eachpane complete all as specified and directed. Please Enable Macros to View BoQ information |
| 77 | S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in eachpane complete all as specified and directed. Please Enable Macros to View BoQ information |
