|
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides andramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed. 01 MTR from cutting edge |
| 2 | All kinds of soil |
| 3 | Ordinary rock |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: |
| 5 | 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 6 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 8 | 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Reinforced cement concrete work in walls (any thickness) including attached pilasters,buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts andstruts upto floor five level including curing but excluding cost of centering shuttering,finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work |
| 12 | foundation footings, base of columns etc |
| 13 | Suspended floors, roofs landings balconies and access platforms. |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in :Cement mortar(1:4) |
| 16 | Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 17 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarsesand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with:Cement mortar 1:6 (1 Cement : 6 coarse sand) NALLAH |
| 18 | Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: Cement mortar 1:6 (1 Cement : 6 coarse sand) NALLAH |
| 19 | Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid seperately |
| 20 | First class kail wood |
| 21 | Second class kail wood |
| 22 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position SAL WOOD |
| 23 | Providing Ply wood 5 ply with commercial ply on both faces 6 mm thick |
| 24 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). First class kail wood(thickness of shutter 35 mm) |
| 25 | Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions ofEngineer- in-charge and panelling with panels of :(Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick pre-laminated particle board (decorative lamination on oneside and other side balancing lamination) grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848 and prelaminatedconforming to IS: 12823, Grade-I, Type-II marked |
| 26 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in-charge (Frame work shall be paid for separately).12mm thick commercial ply conforming to S : 1328 BWR type |
| 27 | Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws. 2nd class kail wood |
| 28 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position andapplying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 29 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 30 | Providing and Fixing the following |
| 31 | aluminum tower bolts ISI marked anodized with necessary screws 150x10mm |
| 32 | Alluminium sliding door bolts ISI marked anodized with nuts and screws complete.250x16mm |
| 33 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm |
| 34 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 50 mm thick with 20mm nominal size stone aggregate. |
| 35 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to matchthe shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Light shade using white cement |
| 36 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 37 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown |
| 38 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 39 | Mirror polishing on marble work/granite/stone work where ever required to give highgloss finish complete. |
| 40 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 41 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 42 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out jointsand preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, allcomplete as per the direction of Engineer-In-Charge. |
| 43 | 15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 44 | Renewing glass panes, with wooden fillets and nails whereever necessary Float glass panes of thickness 4.0 mm |
| 45 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacturer on wood work (hard and soft wood) |
| 46 | Lettering with black Japan paint of approved brand and manufacture |
| 47 | White washing with lime to give an even shade : Old work (two or more coats |
| 48 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 49 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 50 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work |
| 51 | Painting with almunium paint of approved brand and manufacture to give and even shade. OLD |
| 52 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give and even shade. OLD |
| 53 | Finishing wall with water proofing cement paint of required shadeOld work (one or more coats applied @ 2.20 kg/10sqm) over priming coat of primer applied @ 0.80 liters/10sqm complete including cost of priming coat. |
| 54 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 55 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : Of sectional area below 40 sqcm. |
| 56 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : upto 10 mm thick |
| 57 | Chipping of unsound/weak concrete material from slabs, beams,columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 50 mm average thickness |
| 58 | Shotcreting R.C.C. columns, beams and slabs etc. in layers wit approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by Engineer-in- Charge 50 mm thick in Grade M 25 with cement content not less than 330 kg per cum |
| 59 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 60 | Providing and fixing G.I pipes complete with G.I fittings excluding trenching and refilling. |
| 61 | 15mm dia nominal bore (medium) |
| 62 | 20mm dia nominal bore (medium) |
| 63 | 25mm dia nominal bore (medium) |
| 64 | 32mm dia nominal bore (medium) |
| 65 | 40mm dia nominal bore (medium) |
| 66 | 50mm dia nominal bore (medium) |
| 67 | 80mm dia nominal bore (medium) |
| 68 | Supply of following GI accessories |
| 69 | GI elbows 15mm dia nominal bore (medium) |
| 70 | GI elbows 20mm dia nominal bore (medium) |
| 71 | GI elbows 25mm dia nominal bore (medium) |
| 72 | GI TEE 15mm dia nominal bore (medium) |
| 73 | GI TEE 20mm dia nominal bore (medium) |
| 74 | GI TEE 25mm dia nominal bore (medium) |
| 75 | GI Union 15 mm NB (medium) |
| 76 | GI Union 20 mm NB (medium) |
| 77 | GI Union 25 mm NB (medium) |
| 78 | GI Socket 15mm dia nominal bore (medium) |
| 79 | GI Socket 20mm dia nominal bore (medium) |
| 80 | GI Socket 25mm dia nominal bore (medium) |
| 81 | P/F valves of following sizes |
| 82 | Gate valve 25 mm NB |
| 83 | Gate valve 32 mm NB |
| 84 | Ball Valve 15 mm NB |
| 85 | Ball Valve 20 mm NB |
| 86 | Ball Valve 25 mm NB |
| 87 | Providing UPVC pipe including jointing with seal ring (Finolex supreme) |
| 88 | 75mm dia pipe |
| 89 | 110mm dia pipe |
| 90 | Providing UPVC bend including jointing with seal ring (Finolex supreme) |
| 91 | 75mm dia |
| 92 | 110mm dia |
| 93 | Providing and fixing water closet squatting pan (Indian type WC pan) with 100 mm sand cast Iron P or S trap, 10 lit Low level PVC flushing cistern including flush pipe (of approved make) manually, controlled device (handle lever) conforming to IS : 7231 with all fitings and fixtures complete including cutting and making good the walls and floors wherever required. |
| 94 | White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 95 | Providing and fixing white viterous china pedestals type water closet (European type WC pan) with seat and lid, 10 lit low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixture complete including cutting and making good the walls and floors wherever required. |
| 96 | WC pan with ISI marked with solid plastic seat and lid |
| 97 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 98 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 99 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively. |
| 100 | Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixtures complete. (Hindware/Cera/Parry ware make).10 ltr capacity white. |
| 101 | Providing and fixing solid plastic seat with lid for pedestal type WC pan complete (HindwareCera) white solid plastic seat with lid. |
| 102 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings completeFlixible pipe 32mm dia |
| 103 | Providing and fixing the following sanitary accessories. |
| 104 | 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 105 | 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms |
| 106 | 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 107 | 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg |
| 108 | 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with each 280.00 S.S. tringular plate for Eureopean type W. C |
| 109 | 100 mm sand cast iron grating for gully trap |
| 110 | PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms |
| 111 | PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 112 | PVC connection pipes with brass union 45 cm 15 mm nominal bore |
| 113 | PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms. |
| 114 | PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 31mm of 79 mm length and 62 mm breadth weighing not less than 45gms. |
| 115 | PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 116 | 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete |
| 117 | Toilet paper holder C.P. brass |
| 118 | PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 119 | mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Oval shape 450x350mm (outer dimensions) |
| 120 | Disposal of mulba/garbage/filth/ by mechanical means/ transportation to disposal site(not less than 3 kms) including loading un loading and disposal at site. TROLLEY of capacity 6 Cum |
| 121 | Disposal of sewage/filth/soil waste from septic tanks by mechanical means/ transportation to disposal site(not less than 5 kms) including loading un loading and disposal at site. TROLLEY of capacity 5 Cum |
| 122 | Welding, including transportation of plant at site etc. complete By electric plant |
| 123 | Providing of drinking water through tanker at various location of project like Chanderkote, power house, Baglihar and Dharmund colonies. |
| 124 | Slip clearence in soils mixed with mud/ morrum/ kanker/ boulder etc, lift upto 1.5 mtr lead upto 50 mtr |
| 125 | Supply of following items of standard quality like havels/ anchor or equivalent with ISI mark |
| 126 | 1.5 sqmm wire |
| 127 | 2.5 sqmm wire |
| 128 | 4.0 sqmm wire |
| 129 | 6.0 sqmm wire |
| 130 | 10.0 sqmm wire |
| 131 | LED 9 watt |
| 132 | LED Tube light 18W |
| 133 | 6 Amp socket/Switch plain |
| 134 | 6 Amp socket/Switch modular |
| 135 | 16 Amp socket And Switch combined |
| 136 | 16 Amp socket And Switch combined modular |
| 137 | MCB 32 Amp SP |
| 138 | MCB 63 Amp DP |
| 139 | Phenolex Laminated Sheet |
| 140 | Angle Holder plane |
| 141 | Ceiling Fan 48 inch |
| 142 | Exhaust fan 12 inchs |
| 143 | 3 pin top 16 amp |
| 144 | Step up Fan Regulator with dimmer |
| 145 | Servicing of Acs ( split and window) |
| 146 | Servicing of Kent RO water purifier 20 lph capacity |
| 147 | Automatic line voltage corrector |
| 148 | Wall mounting fan |
| 149 | Gyser thermostat |
| 150 | Gyser heating element |
| 151 | S/F of LED console lamps 9 watt on surface or in ceiling as required, of specific brand surya, Philips etc. |
| 152 | P/F street LED lights of standard make not less than 40 watt, including fixing and fasteners all complete. LMR |
| 153 | Supply of labour for repair works at different locations within project area |
| 154 | Mazdoor/ labour |
| 155 | Sweeper |
| 156 | Sewer man/Mali |
| 157 | plumber |
| 158 | electrican |
| 159 | Carpenter ist class |
| 160 | Mason |
| 161 | welder |
| 162 | Driver |
| 163 | Rewinding of motors of following equipments. |
| 164 | Ceiling Fan 48 inch |
| 165 | monoblock water pump |
| 166 | Submersible pump including taking out and lowering back, testing all complete |
| 167 | Supply and installation (if required) of following items |
| 168 | Grass cutting machine, hand held electrical brush cutter with cutting blade/circular saw attached all complete. ( 900 watt, 35 cm with wheel edge , 700 rpm 3.2kg,heavy duty) |
| 169 | Floodlights 100 watt |
| 170 | Carriage of materials by MT including loading, unloading and stacking at site |
| 171 | Cement average 15 km |
| 172 | Sand average 125 km |
| 173 | Aggregate average 15 km |
| 174 | Stones average 04 km |
| 175 | Morrum/ rubbish average 04 km |
| 176 | Bricks average 50 km |
| 177 | Steel average 50 km Please Enable Macros to View BoQ information |
