|
| 1 | 2nd Call for Necessary repair/renovation works at Lady Barrack, Gents barrack I & II and old M.S. Structure and shed work at Gents Barrack-I of DRO SSD Office, during the year of 2026-2027. |
| 2 | Stripping off Worn out plaster and raking out joints of walls , cellings etc. up to any height and in any floor including removing rubbish within a lead of 75mm as directed. |
| 3 | a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent: 4 water: 6 cement) as per Manufacturer's specification Cement to be supplied by the Department) |
| 4 | Supply and installation of ceiling fan. |
| 5 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including round off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface) (ii) With 1:4 cement mortar(c) 10 mm thick plaster |
| 6 | (b) Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick) |
| 7 | Acrylic Distemper to interior wall,celling with coat of solvent based interior grade acrylic primer (as per manufacturer's specification ) including cleaning and smoothning of surface.Two coats |
| 8 | Supplying,fitting and fixing Black Stone Slab used in Kitchen Slab,alcove,wardrobe etc. laid and joined with necessary adhesive cement mortar (1:2) including grinding or polishing as per direction of Engineer-in -Charge in Ground Floor. (a) Slab thickness 20 to 25 mm |
| 9 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete.The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.i) For roof truss works |
| 10 | Supplying , fitting & fixing Zn-Al alloy (55% Al and 45% Zn ) coating of 150 grams per sq. meters followed by colour coated on both side steel sheet work having minium yield strength of 550 M pa of trapizoidal profile of approved make (excluding the supporting frame work ) fitted and fixed with 55mm & 25mm self tapping screw, EPDM Washer 16 mm dia & 3mm th washer etc. complete with 150mm end lap and one corrugation minimum side lap.(payment to be made on area of finished work) |
| 11 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etcA) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m(i) Coloured decorative |
| 12 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc(B) wallWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @2.91 Kg/Sq.m & joint filling using white cement slurry (@0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m(i) Coloured decorative |
| 13 | Supplying,fitting,fixing Fly/Mosquito proof nylon net on any type of window,door shutter frame with necessary fixing arrangements complete. |
| 14 | a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc |
| 15 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 16 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: (a) On timbered or plaster surface With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white) |
| 17 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: (b) On steel or other metal surface With super gloss (hi-gloss) (iv) Two coats (with any shade except white) |
| 18 | Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm long M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical member and minimum 2 Nos for horizontal member etc. complete as per Manufacturer\\"s specification and direction of Engineer-in-Charge. |
| 19 | Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC \\"C\\" channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the \\"C\\" channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In ground floor. |
| 20 | Supplying, fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top.bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annorlised conforming to [S 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc, including labour charges for fitting & fixing of aluminium 2-track/3-track aliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white |
| 21 | Supplying,fitting and fixing Anglo-Indian W.C. in white glazed vitreous china wear of approved make complete in position with necessary bolts,nuts etc. (b) With 'P' trap (with vent) N.B. For W.C. with trap without vent the rate will be reduced by Rs.25.00 |
| 22 | Supplying ,fitting and fixing Closet seat of approved make with lid and C.P. hinges , rubber buffer and brass screws complete. (b) Anglo Indian (ii) Plastic (hallow type) white |
| 23 | Supplying,fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc. |
| 24 | Supplying ,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete.(i) Polythene Flush Pipe |
| 25 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii) 550 mm X 400 mm size |
| 26 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.1. brackets. (a) Sink only |
| 27 | Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (iii) 600 mm long |
| 28 | Supplying, fitting and fixing bib cock or stop cock. (e) PTMT (Polytetra Bib Cock / Stop Cock (Prayag or equivalent) 15 mm |
| 29 | Supplying, fitting and fixing shower of approved brand and makeg) PTMT overhead shower (Prayag or equivalent)(i) 75 mm round |
| 30 | Supplying, fitting and fixing pillar cock of approved make.b) PTMT Pillar Cock 15 mm. (Prayag or equivalent). |
| 31 | Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm |
| 32 | Supplying ,fitting and fixing PTMT Smart Shelf of approved make of Size 300 mm |
| 33 | Supplying, fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. (iii) 900 mm long |
| 34 | (1)Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD 1785 and threaded to match with GI Pipes as per IS: 1239 (Part I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed WorkPVC Pipes15mm |
| 35 | (1)Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD 1785 and threaded to match with GI Pipes as per IS: 1239 (Part I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(a) For Exposed WorkPVC Pipes20mm |
| 36 | Supply & Fidng 240 V, 6 A, 3 pin Modular type plug socket (Legrand/L&T) with 64 Modular type switch, without plug top on 4 Mochile GI Modular type switch board with 3 Module top cover plate Ünshed in wall inci. S&F switch board and cover plate and making necy, connections with PVC Cu wire and earth continuity wire etc. (For seperate Plug) |
| 37 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR PVC insulated & unsheathed copper wire (Brand approved by EIC) partly in 20mm size PVC rigid conduit 'F'R' (Precision make) (for horizontal run & above false celling portion anly) and in 19mm bore, 3mm thick polythene pipe [for vertical run embedded in wall, with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC, to light/fan/cail bell points with Modular type switch (Brand approved by EIC) fixed on Modular Gl switch board complete with 2 no. suitable size \\"Ph & N\\" copper bar with top cover plate making earthing attachment fixed on wall incl. mending good damages to original finish. (PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run (b) Average run 6 mir |
| 38 | Supply & Fixing 240 V, 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator withrast plug top on 12 Module GI Modular type switch board with 12 Module top cover plate flushed in wall incl. B&F switch board and cover plats and making necy.connections with PVC Cu wire and earth continuity wire etc. |
| 39 | Sub Total |
| 40 | GST 18% |
| 41 | LWC 1% Please Enable Macros to View BoQ information |
