|
| 1 | Petty repairs to joinery works such as easing of doors, windows, kitchen cabinets, refixing builder hardware gauge etc by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentry works assigned by the Engineer in Charge. (Note : Replacement of builders hardware if required shall be measured and paid separately). |
| 2 | Petty repairs to plumbing/internal water supply works such as repair to leaking taps, pillar taps, mixers, stop cocks by tightening and providing washer repair to float valves, low leveled cistern by mixture adjustments leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon tapes and including small GI fittings such as GI elbow, socket, union etc as required at site to the satisfaction of user as assigned by the Engineer in Charge. (Note : Replacement of fittings and fixture like bib tap, pillar tap etc, if required shall be measured and paid separately). |
| 3 | S&F in repairs 100 mm aluminium anodized barrel tower bolts of extruted section all as specified and directed. |
| 4 | S&F in repairs 150 mm aluminium anodized barrel tower bolts of extruted section all as specified and directed. |
| 5 | S&F in repairs 300mm aluminium alloy anodised sliding door bolts with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts of extruded section and sliding bolts of extruded section or cast- aluminium alloy complete all as specified and directed. |
| 6 | S&F in repairs 75mm size MS butt hinges medium weight cold rolled, by welding to existing MS pressed steel chowkhat/shutter all as specified. |
| 7 | M & L in repairs for 100 mm butt hinges stainless steel grade 202, 14 gauge thickness medium weight fixed with pressed steel door frame / pvc door frame with screws. |
| 8 | S&F in repairs 100mm size MS butt hinges medium weight colled rolled, by welding to existing MS pressed steel chowkhat/shutter all as specified. |
| 9 | S&F in repairs 100 mm size extruted aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 10 | S&F in repairs 150 mm size extruted aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 11 | S&F in repairs 100mm long safety type aluminium anodised hasp and staple with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 12 | S&F in repairs, 20 mm dia, D type, CP towel rail 60 cm long between flanges complete all as specified and directed. |
| 13 | S&F in repairs, 25 mm dia chromium plated tubular curtain rod complete all as specified and directed. |
| 14 | S&F in repairs chromium plated brackets(open end/closed end) with supports for 25mm dia curtain rod complete all as specified and directed. |
| 15 | S&F in repairs floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed. |
| 16 | S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised staples complete all as specified and directed. |
| 17 | S&F in repairs sheet glass 4mm thick ordinary quality and glazing with oil putty in squares not exc 0.50 sqm in each pane complete all as specified and directed. |
| 18 | S&F 4mm thick figured glass pin head type obscured or frosted on one side and glazing with oil putty in squares not exc 0.50 sqm in each pane complete all as specified and directed. |
| 19 | Taking up or down GI tubing 15mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed. |
| 20 | Taking up or down GI tubing 20mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed. |
| 21 | Taking up or down GI tubing 25mm or 32mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed. |
| 22 | Taking up or down GI tubing 40mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed. |
| 23 | S & F 20 mm outer dia (internal 16mm dia) CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 24 | Refixing old serviceable steel tubing 15 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed. (Note : Serviceable tubing shall be obtained from item No. 26 here in before). |
| 25 | S & F 25 mm outer dia (internal 20mm dia) CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 26 | Refixing old serviceable steel tubing 20 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed. (Note : Serviceable tubing shall be obtained from item No. 27 here in before). |
| 27 | S & F 32 mm outer dia (internal 25mm dia) CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 28 | Refixing old serviceable steel tubing 25 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed. (Note : Serviceable tubing shall be obtained from item No. 28 here in before). |
| 29 | S&F GI tubing medium grade 32 mm bore fixed to wall and ceiling or laying in floors, including cutting complete all as specified and directed. |
| 30 | Refixing old serviceable steel tubing 32 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed. (Note : Serviceable tubing shall be obtained from item No. 29 here in before). |
| 31 | S&F GI tubing medium grade 40 mm bore fixed to wall and ceiling or laying in floors, including cutting complete all as specified and directed. |
| 32 | Cleaning and removing all scale and dirt, etc from tanks and from mouth of circulating pipe etc of capacity exc 250 ltr but n exc 500 ltr complete all as directed. |
| 33 | Cleaning and removing all scale and dirt, etc from tanks and from mouth of circulating pipe etc of capacity exc 500 ltr but n exc 1000 ltr complete all as directed. |
| 34 | S&F in repairs including disconnecting tanks, 1000 ltrs rotational moulded triple layered, polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as directed. |
| 35 | S&F in repairs including disconnecting tanks, 500 ltrs rotational moulded triple layered, polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as directed. |
| 36 | S&F disconnecting existing tanks exc 500 ltr but n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. |
| 37 | S&F in repair Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. |
| 38 | S&F in repair Ball brass valves , high pressure , with polythene float and fly nut complete & high-density plastic ball , suitable for 25 mm bore pipe, screwed for iron pipe and fixed. |
| 39 | S&F in repairs, bib taps fancy type chromium plated 15mm bore cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 40 | S&F in repair 15 mm bore Pillar taps, cast copper alloy, with capston heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 41 | S&F in repairs stop valves/angle cocks or two way angle cock fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore iron pipe or for unions and fixed complete all as specified and directed. |
| 42 | S&F in repairs 15mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 43 | S&F in repairs 20mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 44 | S&F in repairs 25mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 45 | S&F in repairs 15mm bore PTMT Bib tap standard or any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed. Make : Prayag & equivalent. |
| 46 | S&F in repairs 15mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 142 gms) complete all as specified and directed. Make : Prayag & equivalent. |
| 47 | All as per item No 53 here in before but 20mm dia (Minimum weight 210 gms) complete all as specified and directed. Make : Prayag & equivalent. |
| 48 | All as per item No 53 here in before but 25mm dia complete all as specified and directed. Make : Prayag & equivalent. |
| 49 | S&F in repairs SS waste coupling of 32 mm dia (half or full threaded), including taking down old coupling of any description for WHBs, urinals complete all as specified and directed. |
| 50 | S&F in repairs SS waste coupling of 75 mm dia (half or full threaded), including taking down old coupling of any description for kitchen sink complete all as specified and directed. |
| 51 | S&F grating 150mmx150mm made out of stainless steel complete all as specified and directed. |
| 52 | S&F in repairs 15mm dia 450mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed. |
| 53 | All as per item No 52 here in before but 600mm long PVC connection complete all as specified and directed. |
| 54 | S&F in repairs PVC connection 750mm long of dia 15mm complete. |
| 55 | S&F in repairs PVC connection 900mm long of dia 15mm complete. |
| 56 | S&F in repairs 600mmx 450 mm bevelled edge mirror of selected quality glass 5.5mm thick, mounted on 6 mm thick AC building boards or water proofing plywood fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 57 | S&F in repairs EWC anti microbial seat cover hygenic type for pedestal pattern complete all as specified and directed. |
| 58 | S&F in repairs CP soap dish fixed to wall with brass chromium plated screws complete all as specified and directed. Make : Prayag & equivalent |
| 59 | S&F in repairs Chromium plated toilet paper holder. |
| 60 | S&F in repairs chromium plated shower rose with or without swivel joints any size, including fixing to GI pipe for 125mm dia complete all as specified & directed. |
| 61 | S&F in repairs 350x450mm size cabinet mirror rectangular shape with 4mm thick selected quality mirror and PTMT frame with openable door shutter with PTMT frame outside mirror as complete.Make : Prayag & equivalent. |
| 62 | S&F in repairs toilet jet spray made out of stainless steel flexible tube of 15mm dia complete. |
| 63 | S&F in repairs for PVC low level flushing cistern, white, 10 ltrs capacity with all internal accessories & fixed to wall & making good to wall surfaces including taking down existing flushing cistern complete. Make: Cera, Hindware, Prayag & equivalent. |
| 64 | S&F in repairs round moulded PVC water tank lid for specially 200 ltrs, 500 ltrs, 1000 ltrs complete. |
| 65 | S&F in repairs mild steel helical door spring 150mm ordinary rat tail rod pattern springs including roller plate, bolting, welding etc. complete. |
| 66 | S&F in repairs mild steel helical door spring 200mm ordinary rat tail rod pattern springs including roller plate, bolting, welding etc. complete. |
| 67 | Supply only 8mm thick plain edge moulded corner glass shelf of size 300 X 300 mm fix with cp double protection rail all as specified and directed by Engr in charge |
| 68 | Supply only 8mm thick plain edge moulded cornor glass shelf of size 450 X 125 mm fix with cp double protection rail all as specified and directed by Engr in charge |
| 69 | S&F in repairs aluminium (Extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete. Make: Dyna and equivalnt ISI marked. |
| 70 | S&F in repairs 32mm dia flexible waste pipe for urinal, wash basin and kitchen sink for length exc. 1m not exc 2m complete. |
| 71 | S&F in repairs Vitreous China wash down water closet (Squat pattern ) white complete as fixed in repair excluding flushing cisternand flush type \\"Orrisa\\" pattern size 580x440 with integral footrest inject connection to trap antisyphonage etc complete including joint between flushing pipe and socket of WC. |
| 72 | S&F in repairs Vitreous China Europion water closet (pedestal pattern) white excluding flushing cistern and flush pipe and trap white including fixing bolts, WC seat cover fixed with aluminium or MS chromium plated. |
| 73 | S&F in repairs Vitreous China wash hand basin, angle back 550x400mm white excluding taps, waste chains and plugs and porcilin dtopper but including bracket complete. |
| 74 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified. |
| 75 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed on walls complete all as specified and directed |
| 76 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring jointsfixed on walls complete all as specified and directed |
| 77 | S&F PVC (SWR) bends, 110 mm bore, any radius with access door complete all as specified and directed. |
| 78 | S&F PVC (SWR) bends, 75 mm bore, any radius with access door complete all as specified and directed. |
| 79 | S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 110mm bore, complete all as specified and directed. |
| 80 | S&F PVC (SWR) Junction, single, (single T) equal or unequal with access door, 75 mm bore, complete all as specified and directed. |
| 81 | M&L for PVC (SWR) vent cowl, 110 mm bore complete all as specified and directed. |
| 82 | M&L for PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed. |
| 83 | S&F PVC (SWR) branch piece, single, (single Y) equal or unequal , 110mm bore, complete all as specified and directed. |
| 84 | S&F PVC (SWR) branch piece, single, (single Y) equal or unequal 75 mm bore, complete all as specified and directed. |
| 85 | S&F PVC (SWR) branch piece, double, (double Y) equal or unequal , 110mm bore, complete all as specified and directed. |
| 86 | S&F PVC (SWR) branch piece, double (double Y) equal or unequal 75 mm bore, complete all as specified and directed. |
| 87 | S&F in repairs sinks with draining board made of stainless steel 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe, overall size 915mm x 460 mm & bowl size 410mmx330mm x 160mm complete. |
| 88 | S&F in repairs sinks made of stainless steel 1 mm thick kitchen with plugs , washers and waste , including bedding in cement mortar on to dwarf wall or including fixing cantiliver brackets and connecting union to pipe, overall size 495mm x 420 mm & bowl size 410mmx330mm x 160mm complete. |
| 89 | S&F in repairs stainless steel kitchen rack made of .63 mm thick stainless steel sheet of size 880 mm x 880 mm x 230 mm fixed to wall with screws complete . |
| 90 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including makingconnections and fixed in position complete in all respect as specified. |
| 91 | S&F in repairs CI brackets 450mm long made with IAS 25x3mm suitable for wash hand Only basin complete. |
| 92 | S&F in repairs brass CP centre hole basin mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete. |
| 93 | S&F in repairs brass CP wall mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete. |
| 94 | S&F necessary weldings in repairs 2.5 cm but n exc 5cm thick of metal to be welded exc 6mm but not exceeding 20mm complete |
| 95 | S&F door sill of any size made up of rubber at the bottom and top is of aluminium sheet including screwing to protect from rats, snakes etc. complete all as specified and directed. |
| 96 | S&F in repairs CPVC pipe 25 mm bore fixed to flushing cistern to water closet of any type, including cutting complete all as specified and directed. |
| 97 | S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) |
| 98 | S&F in repairs, flush cock 25mm bore cast copper alloy with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 99 | S&F in repairs, magnet door stopper of size round or rectangular including all fittings fixed complete all as specified and directed. |
| 100 | Attending complaints of internal water supply pipes and fittings for removing of blockages etc of any description incl removing & clearing of air locks etc., by pressure pump or any other means including taking down and refixing of pipes & fittings and replacing old unserviceable pipes and fitting with new ones complete all as specified and as directed. Note: - New pipes and fittings replaced if any shall be measured and paid under respective item of this schedule as S&F. |
| 101 | S&F in repairs, push tap 15mm bore CP screwed for iron pipe and fixed for urinals, complete all as specified and directed. |
| 102 | S & F in repairs double action floor spring, hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed. |
| 103 | S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) of size 655 x 350 x 735 mm (Cat. No. S1031101) including plastic water closet seat, (Cat. No. B1520102) soft close seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devicecomplete in all respect all as specified. (Make: Cera or equivalent) |
| 104 | S&F in repairs Mild steel Mortice lock of 2 levers, vertical type, size 100 mm for Aluminium/Flushed doors complete all as specified and directed. Please Enable Macros to View BoQ information |
