|
| 1 | Dismantling wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness including cover fillets complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in any position as in unframed work complete all as specified and as directed by Engineer-in-Charge. |
| 3 | S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in Ceilling complete all as specified and as directed by Engineer-in-Charge. |
| 4 | S&F 9mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls complete all as specified and as directed by Engineer-in-Charge. |
| 5 | M & L Plain fillets. exc. 13 & n.exc 25 Sq cm as in square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed by Engineer-in-Charge. |
| 6 | All as per item No 5.00 above but exc 3 & n.exc 6 Sq cm in bullnosed, splayed, chamfered or rounded on one edge or face as in bedding complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engineer-in-Charge. |
| 8 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 9 | All as per item No 8.00 here-in-before but except sheeting (any Thickness) complete all as specified and as directed by Engineer-in-Charge. |
| 10 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 11 | All as per item No 10.00 heer-in-before but except sheeting (any Thickness) complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed by Engineer-in-Charge. |
| 13 | S&F Roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance piece, cleats etc Fe 410-W (Gde - E - 250) Quality 'A' complete all as specified and as directed by Engineer-in-Charge. |
| 14 | M&L for Preparing new surfaces. of any description, over 10cm in width or girth,not otherwise described and applying two coats of Synthetic enamel (ordinary tint) paing over a coat of red oxide complete all as specified and as directed by Engineer-in-Charge. |
| 15 | M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of Synthetic enamel (ordinary tint) complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 17 | M&L Non - skid Ceramic coloured tiles tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,, in floors etc over Screed bed or bedding layer of mortar 15 mm thick in CM 1 : 4, over and including 25 mm thick under layer of PCC 1 : 2 : 4 to bring the work in proper levelling set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge. |
| 18 | M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colouredcement to match over Screed bed or bedding layer of mortar 15 mm thick in CM 1 : 4, over 25 mm thick cement concrete type B1 1 : 2 : 4 (20mm graded aggregate), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by Engineer-in-Charge. |
| 19 | M&LGlazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick over 15mm thick plastering in cement mortor 1 : 4, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed by Engineer-in-Charge. |
| 20 | Demolition in precast cement concrete walling built in cement mortor including all quoins, arches, pillars, etc complete all as specified and as directed by Engineer-in-Charge. |
| 21 | M&L for PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate ) block masonry with solid block exc 10cm in width and set as in wall etc in CM 1:4 complete all as specified and as directed by Engineer-in-Charge. |
| 22 | M&L for Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 23 | M&L for Rendering 15mm thick on other than fair faces of brickwork or concrete surfaces in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 24 | M&L preparing new plastered surfaces of walls and applying two coat of distemper oil emulsion over a coat of primer complete all as specified and as directed by Engineer-in-Charge. |
| 25 | M&L preparing new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-Charge. |
| 27 | All as per item No 26.00 heer-in-before but n.exc 1.5 Sqm (without taking off shutters from the frames) complete all as specified and as directed by Engineer-in-Charge. |
| 28 | M&L 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 29 | M&L 2nd class hardwood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats for doors complete all as specified and as directed by Engineer-in-Charge. |
| 30 | M&L 2nd class hardwood 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed by Engineer-in-Charge. |
| 31 | S & F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-in-Charge. |
| 32 | M&L for preparation of new wood surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of Synthetic enamel (ordinary tint) over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge. |
| 33 | S&F extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and as directed by Engineer-in-Charge. |
| 34 | All as per item No 33.00 here-in-before but 100mm complete all as specified and as directed by Engineer-in-Charge. |
| 35 | S&F Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 250mm long complete all as specified and as directed by Engineer-in-Charge. |
| 36 | S&F Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete all as specified and as directed by Engineer-in-Charge. |
| 37 | All as per item No 36.00 here-in-before but 100mm complete all as specified and as directed by Engineer-in-Charge. |
| 38 | S&F Mild steel 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 39 | S&F Mild steel 75mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 40 | Taking down or up steel tubing and connections incl cleaning for refixing or removal to store for 15 mm dia bore complete all as specified and as directed by Engineer-in-Charge. |
| 41 | S&F for 25mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed to walls, ceilings or in floors etc complete all as specified and as directed by Engineer-in-Charge. |
| 42 | S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc including making good to floor complete all as specified and as directed by Engineer-in-Charge. |
| 43 | S&F in repair PVC valveless 10 ltr cap, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Dismantling water tanks Exc 500 & N.exc 1000 litres capacity complete all as specified and as directed by Engineer-in-Charge. |
| 45 | S&F 1000 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge. |
| 46 | S & F 25mm dia nipple suitable for water tank complete all as specified and as directed by Engineer-in-Charge. |
| 47 | S & F in repair 25mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 48 | S & F stainless steel/PTMT Gratings 100mm dia complete all as specified and as directed by Engineer-in-Charge. |
| 49 | S & F in repair 15mm dia Pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fancy type complete all as specified and as directed by Engineer-in-Charge. |
| 50 | S & F for 15mm PVC connection of 600mm long complete all as specified and as directed by Engineer-in-Charge. |
| 51 | S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in-Charge. |
| 52 | S & F in repair 20mm dia CP single towel rail 600mm long D type incl a pair brackets fixed to wall complete all as specified and as directed by Engineer-in-Charge. |
| 53 | S & F in repair 15mm bore Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed fancy type complete all as specified and as directed by Engineer-in-Charge. |
| 54 | S&F in repair 15mm Angle/Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 55 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed by Engineer-in-Charge. |
| 56 | S&F in repair Waste fittings 32 mm, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed by Engineer-in-Charge. |
| 57 | S&F in repair vitreous china wash basin white flat back size 550x400mm ovel type/round /any shape with pedastal (including tap, waste chain and plug and porcelain stopper and brackets complete all as specified and as directed by Engineer-in-Charge. |
| 58 | S&F in repair Vitreous China, semi-pedestal pattern (Anglo-Indian Type)white, with seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminized hinging deviced including flush pipe and joint etc and connection to drain, flushing, pipe, anti-syphonage pipe, and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concrete 1:2:4 type B-0, as in repairs complete all as specified and as directed by Engineer-in-Charge. |
| 59 | S&F in repairs hand shower Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engineer-in-Charge. |
| 60 | Demolition of stone/boulders masonry, laid dry complete all as specified and as directed by Engineer-in-Charge. |
| 61 | Demolition of stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-Charge. |
| 62 | M&L for stone masonry Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4, complete all as specified and as directed by Engineer-in-Charge. |
| 63 | M&L for stone masonry Walling of random rubble, uncoursed, well bonded, and solidly heartd laid dry complete all as specified and as directed by Engineer-in-Charge. |
| 64 | Demolition of Reinforced Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) (reinforcement cut as required to facilitate demolition) complete all as specified and as directed by Engineer-in-Charge. |
| 65 | Use & waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not ex ceeding 200mm thick with flat rough finished surfaces of concrete, complete all as specified and as directed by Engineer-in-Charge. |
| 66 | M&L for RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in slabs supported on walls, beams, and columns in floors, roofs complete all as specified and as directed by Engineer-in-Charge. |
| 67 | M&L for cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregate ) in foundation, filling and mass concrete complete all as specified and as directed by Engineer-in-Charge. |
| 68 | M&L for Precast reinforced cement concrete, type B-1, 1:2:4 (Using 20mm graded crushed stone aggregate) as in manhole cover set in cement mortar 1:4, complete all as specified and as directed by Engineer-in-Charge. |
| 69 | TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge. |
| 70 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar of internal dia 75-100mm incl any earth work and demolition of PCC complete all as specified and as directed by Engineer-in-Charge. |
| 71 | PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floor of 110mm bore pipe complete all as specified and as directed by Engineer-in-Charge. |
| 72 | S&F for 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-Charge. |
| 73 | PVC (SWR) Vent cowl of 110mm bore, complete all as specified and as directed by Engineer-in-Charge. |
| 74 | PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or floor of 75mm bore pipe complete all as specified and as directed by Engineer-in-Charge. |
| 75 | PVC (SWR) floor trap of 75mm plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge. |
| 76 | M&L for 100mm thick cement concrete 1:3:6 type C2 bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed by Engineer-in-Charge. |
| 77 | S&F for 110 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed by Engineer-in-Charge. |
| 78 | S&F for 110 mm bore PVC (SWR) branch piece,single (single Y) equal or unequal complete all as specified and as directed by Engineer-in-Charge. |
| 79 | Taking down carefully aluminium point wiring light, fan socket or power complete fitting such as switches, ceiling rose, fan regulator, socket including light fitting etc complete with /PVC /MS conduit and T/W battern / casing caping complete all as specified and as directed by Engineer-in-Charge. |
| 80 | M&L in repair for point wiring with PVC insulated FRLS single core cable of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories lain on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board for housing like switches, sockets, fan regulators etc all as directed by Engineer-in-Charge for one light point/one fan point controlled by one switch |
| 81 | All as per item No 80.00 above but for one 3 pin 5 amps socket outlet independent with cables 2.5 sqmm size |
| 82 | All as per item No 80.00 above but for one 3 pin 5 Amp socket outlet on same board . |
| 83 | All as per item No 81.00 above but for but with conductor of size 4 sqmm (Nominal area) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm PVC insulated stranded copper conductor Cable complete all as specified and as directed by Engineer-in-Charge. |
| 84 | S&F Socket 2 in 1, 5 pin 5 Amp flush type complete all as specified and as directed by Engineer-in-Charge. |
| 85 | S&F Switch piano flush type 5 Amp, single pole, one way complete all as specified and as directed by Engineer-in-Charge. |
| 86 | S&f Switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and as directed by Engineer-in-Charge. |
| 87 | S&F Switch Socket Combination 2 in 1, 3 pin, 15/16 amp flush type Universal complete all as specified and as directed by Engineer-in-Charge. |
| 88 | M&L for ceiling rose surface Bakelite 65x50mm two to three terminal complete all as specified and as directed by Engineer-in-Charge. |
| 89 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge. |
| 90 | S&F basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 10 watt, 2 feet long, with all accessories complete all as specified and as directed by Engineer-in-Charge. |
| 91 | S&F basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 20 watt, 4 feet long, with all accessories complete all as specified and as directed by Engineer-in-Charge. |
| 92 | Dismantling and Taking down old u/s street / building security Light fittings from poles, flood lights, post top lantern lights and garden lights for replacement with LED fittings complete all as specified and as directed by Engineer-in-Charge. |
| 93 | Supply and fix in Repair LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed by Engineer-in-Charge. |
| 94 | M&L for GI bracket 1.5 mtr long made out of GI pipe 40mm dia bend to suitable radius incl clamps nuts bolts washers incl painting with aluminum paint etc complete all as specified and as directed by Engineer-in-Charge. |
| 95 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and as directed by Engineer-in-Charge. |
| 96 | S&F in repair sheet metal powder coated versatile Double door SPN distribution board, 12 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz complete all as specified and as directed by Engineer-in-Charge. |
| 97 | M&L in repair for MCB SPN 63 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards complete all as specified and as directed by Engineer-in-Charge. |
| 98 | S&F to MCB SP 6-32 Amp with 10KA breaking capacity of 'C' series in distribution boards with all accessories complete all as specified and as directed by Engineer-in-Charge. |
| 99 | Supply and fix in replacement of exhaust fan, engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm AC single phase with, blades, and frame and louvers of size 300 mm sweep complete all as specified and as directed by Engineer-in-Charge. |
| 100 | M & L for Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to MS galvanized earh strip of size 25 x 4 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, GI strip laid in dia 40 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit (30X30X30cm) with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result complete all as specified and as directed by Engineer-in-Charge. |
| 101 | Taking out old unsv underground cable of any size/make/ type etc from excavted tranches/ on pole passing through pipes etc from different locations complete all as specified and as directed by Engineer-in-Charge. |
| 102 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out pipe line etc for repairs / laying cables etc and getting out in soft / loose soil complete all as specified and as directed by Engineer-in-Charge. |
| 103 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by Engineer-in-Charge. |
| 104 | Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by Engineer-in-Charge. |
| 105 | S&F DWC tubing of size 90/75 mm dia for laid in trenches/along the pole/wall for protection of cable complete all as specified and as directed by Engineer-in-Charge. |
| 106 | Supply, laying and testing XLPE insulated, screened, PVC bedded galvanised steel strip armoured electric power cable (Heavy duty) with aluminium conductor, 1100 Volts grade lay in trenches, ducts, along pole cross sectional area 70 Sqmm 3.5 Core complete all as specified and as directed by Engineer-in-Charge. |
| 107 | M&L for Busbar chambers sheet metal powder coated IP-44 & IP67 wheather proof 415 Volt 3 phase with 4 aluminium busbar strip of rating 200 Amp 6 way fixed on GI iron angle of size 40mm x 40mm x 5mm complete all as specified and as directed by Engineer-in-Charge. |
| 108 | Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result complete all as specified and as directed by Engineer-in-Charge. |
| 109 | Supply and laying or fixing or passing through pipe, 16sq mm 4core 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 4 CORE nominal cross section in service connections complete all as specified and as directed by Engineer-in-Charge. |
| 110 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 61,722.00 and any other reduction if any from quoted amount. Please Enable Macros to View BoQ information |
