|
| 1 | Construction and Development of Display Hall (Phase-II) at Kalinga District Dehradun-Uttarakhand. |
| 2 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as perdirection of Engineer-in-charge. In cement mortar |
| 3 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Ordinary rock |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | Random rubble masonry with hard stone in foundation and plinth, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 8 | Centering and shuttering including strutting, propping etc. Columns, Pillars, Piers, Abutments, Posts and Struts |
| 9 | Centering and shuttering including strutting, propping etc. Suspended floors, roofs, landings, balconies and access platform |
| 10 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo- Mechanically Treated bars of grade Fe-500D or more. |
| 14 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor level in all shapes and sizes in : Cement Mortar 1:6 (1 cement : 6 coarse sand). |
| 15 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) |
| 16 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 17 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 18 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood |
| 19 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer in charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 30 mm thick shutters |
| 20 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. |
| 21 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood 35 mm thick shutters |
| 22 | Provision for electrification including all fixtures with material labour etc complete.(all Items with ISI mark ) rate including GST |
| 23 | Wire 0.75 mm copper wire ( 90.00 mtr) with ISI mark ( R.R Cable /Havells ) |
| 24 | Wire 1.00 mm copper wire ( 90.00 mtr ) with ISI mark (R.R Cable/ Havells) |
| 25 | Wire 1.50 mm copper wire ( 90.00 mtr) with ISI mark (R.R Cable/ Havells) |
| 26 | Wire 2.50 mm copper wire ( 90.00 mtr ) with ISI mark (R.R Cable/ Havells) |
| 27 | Modular box 8 way (Anchor by Panasonic Roma) |
| 28 | Modular sheet 8 module with ISI mark (Anchor by Panasonic Roma) |
| 29 | Modular box 6 way with ISI mark (Anchor by Panasonic Roma) |
| 30 | Modular sheet 6 way with ISI mark (Anchor by Panasonic Roma) |
| 31 | Modular A.C Box with 20 amp single pole MCB, enclosure and heavy duty ISI plug top (White) (Anchor by Panasonic ) |
| 32 | Switch 6 amp with ISI mark (Anchor by Panasonic Roma) |
| 33 | Twin Socket 6 A/16 A with ISI mark (Anchor by Panasonic Roma) |
| 34 | Ceiling fan 1200 mm Ambrose ES with ISI mark ( Havells) |
| 35 | Exhaust fan 300 mm(12') 45 W with ISI mark (Anchor by Panasonic ) |
| 36 | Regulator with 100 W ISI mark (Anchor by Panasonic Roma) |
| 37 | LED tube light batten (Set) 20 watt with ISI mark (Havells) |
| 38 | LED bulb 15 watt with ISI mark ( Havells ) |
| 39 | Consealed light 9 watt with ISI mark ( Orient/Wipro) |
| 40 | Holder with ISI mark ( Anchor by panasonic) |
| 41 | Conduit pipe for wiring (20 foot) |
| 42 | Modular box 2 way with ISI mark |
| 43 | Sheet 2 way with ISI mark |
| 44 | Electrician |
| 45 | Beldar |
| 46 | M.C.B box double door 12 way with ISI mark |
| 47 | M.C.B 16 A with ISI mark ( Havells ) |
| 48 | Isolator 63 amp with ISI mark ( Havells) |
| 49 | Consealed box |
| 50 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws , 35 mm thick shutters, with ISI marked Stainless steel butt hinges bright finished of required size, Second class teak wood |
| 51 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :30 mm thick shutters Second class teak wood |
| 52 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 53 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm |
| 54 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 55 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes |
| 57 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 58 | Providing and fixing on wall face unplasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter |
| 59 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermalexpansion. Coupler 110 mm |
| 60 | Providing and fixing on wall face unplasticized - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm |
| 61 | Providing and fixing on wall face unplasticized - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° , 110 mm bend |
| 62 | Provision for Providing and fixing sanitary installation and water supply in toilet including material and labour etc complete ( All Material Rate As per prevailing Market rate ) |
| 63 | White vitreous china pedestal type water closet (W.C European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend( Hindware/Somani) |
| 64 | Wash Basin ( Hindware/Somani ) with Full Pedestal with Fixing Accessories |
| 65 | Angular Stop Cock With Wall Flange (Hindware/Somani) |
| 66 | Long body Bib Cock with wall flange ( Hindware/Somani ) |
| 67 | Pillar tap ( Hindware/Somani ) |
| 68 | Health Faucet (8mm Dia, 1 Meter Long Flexible Tube & Wall Hook) ( Hindware/Somani ) |
| 69 | Towel Ring Round with Round Flange ( Hindware/Somani ) |
| 70 | Urinal with Spreader Hole and Fixing Accessories d Fixing Accessories, Size: 355x340x535 mm( Hindware/Somani ) |
| 71 | Waste coupling 32mm Size Half Thread with 80mm height Also available |
| 72 | Nani trap |
| 73 | stainless steel jali |
| 74 | BALL Valve (CPVC) Size 1 inch (Ashirwad /Supreme/astral/finolex) |
| 75 | Union CPVC Size 1 inch (Ashirwad /Supreme/astral/finolex) |
| 76 | Teflon tape |
| 77 | C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate (Ashirwad /Supreme/astral/finolex) |
| 78 | beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board Size 600x450 |
| 79 | PVC connection pipe (Ashirwad/Supreme/astral/finolex) |
| 80 | Wall mixer(Ashirwad /Supreme/astral/finolex) |
| 81 | PVC waste pipe |
| 82 | Plumber |
| 83 | Beldar |
| 84 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 85 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. Nominal concrete 1:3:6 or richer mix ( including equivalent design mix). |
| 86 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 87 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 88 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 89 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment |
| 90 | Provision for Beldar for cleanness of site after the completion of work |
| 91 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo- Mechanically Treated bars of grade Fe-500D or more complete. Please Enable Macros to View BoQ information |
