|
| 1 | Dismantling of tiles clearing away and carefully stacking materials useful for re-use for any thickness of walls |
| 2 | Clean removal of cement plastering from walls |
| 3 | 3-phase pannel board including labour charges |
| 4 | Paving the floor with vitrified tiles of 20mm thick in cm 1:3 and pointed with same colour cement including all cost of materials and labour charges etc., complete as per standard specifications. |
| 5 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 over a cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 6 | Supplying and fixing of 1200 mm (48\\") sweep AC Ceiling fan complete with stepped elctronic 300 W regulator with 1m down rod with fan clamp with side plates and cross cum size 450 mm (18\\") etc., complete. |
| 7 | Supply and fixing of WT bulk head fitting with guard (Philips/Bajaj/Crompton/K-Lite) suitable for 11W CFL lamp with CFL (SD 83) |
| 8 | Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable heavygauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A FT switch inflush with wall andcovered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 1.5sq.mm copper wire for light point / fan point (for electronic regulator) |
| 9 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used , hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 10 | Manufacturing, Supplying and Fixing of SS Hand Rails for staircase using 50mm dia 304L grade SS pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia SS pipe post of 1.00mm thick as vertical at 900mm centre with 2 No's of 25mm dia intermediate horizontal SS pipe of 1.60mm thick in between the vertical pipe has to be welded to the 100 x 100 x 6mm MS base plate encased in the base concrete the rate is inclusive the charges of all labour charges etc., complete asper std specifications |
| 11 | Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.(solid pannel PVC door with frame) |
| 12 | Supply and fixing of 1.50 Hp Compressor Monoblock Pumpset including all accessories and oil etc complete as per standard specifications. |
| 13 | Conducting Geophysical Investgation for finding ground water table with necessary T & P including all labour charges etc complete as per std specification |
| 14 | Supplying of 140mm dia PVC Special Blue pipes for borwelles outer casing pipe of best quality including all labour charges etc., complete as per standard specifications. (PWD SOR 2025-26 Unique code No. M-1044) Pg. No. 111. |
| 15 | Drilling of 125mm (4 3/4”) nominal dia vertical borewells anywhere in Tamilnadu in all formations, suitable for down the hole hammer drilling such as medium hard rock to hard rock formation, consolidated formation etc and drilling over burden to a dia not less than 200mm including insertion of 165 mm PVC casing pipe, couplings caps and other relevant materials required upto the depth as directed by the Engineer or his representative including grouting of cement 25kg (minimum) up to the depth of over burden are including borewell development flushing of borewell at a pressure 7kg/cm2 (100 lb per square inch) including yield test, crew charges, cost of consumables, transportation charges of casing pipes and all other materials including assembling complete to the satisfaction of the Engineer and as stipulated in the technical specification. The entire works should be carried out as per IS 2800 Part I & II / 1979. Finished dia of borewells shall not be less than 145mm |
| 16 | Labour Charges for inserting 140mm OD PVC casing pipes assmbly (with slots or without slots) in the drilled hole including the jointing the pipes with PVC couplers with cement paste ect.complete as per Std Specifications. |
| 17 | Supplying of following pipes and special including cost and conveyance all materials etc. complete |
| 18 | 1\\" HDPE hose |
| 19 | 1\\" GI pipe |
| 20 | 1\\" GI union |
| 21 | 1\\" GI elbow |
| 22 | 1\\" GI tee |
| 23 | 1\\" GI coupling |
| 24 | 1\\" G.I Hex Nipple |
| 25 | 1\\" x 3/4\\" GI Reducer |
| 26 | 3/4\\" HDPE hose |
| 27 | 3/4\\" GI pipe |
| 28 | 3/4\\" GI union |
| 29 | 3/4\\" GI elbow |
| 30 | 3/4\\" GI tee |
| 31 | 3/4\\" GI coupling |
| 32 | 3/4\\" G.I Hex Nipple |
| 33 | 1\\" Hose color |
| 34 | 3/4\\" Hose color |
| 35 | 1\\" PVC Pipe |
| 36 | 1\\" PVC Coupling |
| 37 | 1\\" PVC Tee |
| 38 | 1\\" PVC Ellbow |
| 39 | 3/4\\" PVC Pipe |
| 40 | 3/4\\" PVC Coupling |
| 41 | 3/4\\" PVC Tee |
| 42 | 3/4\\" PVC Ellbow |
| 43 | 3/4\\" x 1/2\\" PVC Reducer |
| 44 | 3/4\\" G.M Gate valve |
| 45 | Bottom unit |
| 46 | 140mm Bore cover |
| 47 | 1000 litre tank |
| 48 | 15mm SD tap |
| 49 | Solventcement |
| 50 | Supply and run of 2 of 4 sq.mm(56/0.3) PVC insulated SC unsheathed Cu.conduction of 1100V on 7/20 GI bearer wire for service connection mains. (SD 65) |
| 51 | Supply and run of 2 of 4 sq.mm.(56/0.3)PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (class 'B' ) suitably bent at both ends with neccessay angle iron upright and end support for mains (SD 70) |
| 52 | Supply and fixing of 16 Amps DP Switch with metal clad of 500 V with fuse and neutral (Side Handle) on suitable TW Box PWD Earthing(SD 141) |
| 53 | Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mmx50mmx6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masony. (SD 233) |
| 54 | Supply and fixing of 15A aeriual fuse unit(500A) on suitable 100x100 mm TW concealed box with hylem sheet on on the tapping pole with necessary clamps (SD 128) |
| 55 | Supply and Fixing of TNEB meter Board suitable for 32A single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\\"x1/8\\" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection with 7/20 PVC insulated copper wire from EB meter to fuse unit,(SD 125). |
| 56 | Supply and Fixing of 5A or 10 Amps AC Single phase 230 V , 50 HZ watt hour metre on Suitable TW box complete with earth connections. (SD 124) |
| 57 | Errection of pipes and specials in to borwell and conneckion 1.00 HP compressor motar etc., complete as per standard specification |
| 58 | Supply and fixing of 300mm(12') sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall |
| 59 | supply and fixing of 4 feet led 18w fiting with led 18w tube ( Lower end) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS copper leads from terminals to the fitting |
| 60 | Wastern freezer, Tilting Grinder(15L), Preethi Mixi, Hot Box 30L, Weight machine 50 Kg and Cooking Utensils(Quotation) |
| 61 | Wester Freezer 350L |
| 62 | Preethi Mixi |
| 63 | Hot Box 30L |
| 64 | Weight Machine 50Kg |
| 65 | Tilting Grinder 15L |
| 66 | Polyet Bucket |
| 67 | Idly Box 6 Plate |
| 68 | Idly Plate 25K |
| 69 | Silver drum |
| 70 | Silver Thokku |
| 71 | Kannu Koodai Small |
| 72 | Kannu Koodai Big |
| 73 | Aluminium Bucket |
| 74 | Aruvanmanai 10 INC |
| 75 | Water Jug SS |
| 76 | Tumbler SS |
| 77 | Basin Bigg |
| 78 | Basin Small |
| 79 | Rice Karandi |
| 80 | Mavu Karandi |
| 81 | Iron kadai Bigg |
| 82 | Gas stove 2B SS |
| 83 | Plate SS |
| 84 | Alu Vattom Small |
| 85 | Alu Vattom Big |
| 86 | Alu vattom Moodi Bigg |
| 87 | Alu Vattom moodi small |
| 88 | Plastic Chair small |
| 89 | Plastic Chair Bigg |
| 90 | SS Table |
| 91 | Plastic Drum Big |
| 92 | Clock |
| 93 | Varappu Karanti BIG |
| 94 | Supplying and erecting in position of reverse osmosis water cum purifier to potable water with world health organisation Standards.(50 litres capacity) Please Enable Macros to View BoQ information |
