|
| 1 | Clearing jungle including up rooting of rank, vegetation grass, push, wood trees and samplings of girth up to 30 cms, measured at a height of 1M. above ground level and removal of rubbish up to a distance of 50M. out side the periphery of area cleared. as per SOR No.-259 (i) |
| 2 | Earth work in embankment in ordinary soil embankment to be in 20cm layer including ramming dressing the surface to required levels with half tonne steel or wooden rammer and rolling every third and top most layer in roller 8 to 10 tonne capacity and including 1.50mtr, lift and all lead (earth shall be brought from a place with including cartage of earth by mechanically transport and T & P Labour etc required for proper completion earth shall be arranged by the contractor at his own cost. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.) The Contractor has detect different utilities like sewer line, Water Supply Line, Electric Cable, Telephone Cable, Gas Pipe Line(using Utility Detecting MAchine Before Start of Excavation and Shall start Excavation only after getting Permission of Engineer-in-Charge. |
| 4 | Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & Cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of work |
| 5 | Cement concrete with 4 cm gaug approved stone ballast, course sand & cement in proportion of 4:2:1 including supply of all materials labour tools and plant etc. required for proper completion of work Same as above item No. 279 but with 2cm gaug stone grigt insted of 4 cm gauge stone ballast. |
| 6 | RCC work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:2:4 in slabs excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 BWG GI binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools & plants etc. required for proper completion of work including cost of binding wire. The rates excludes making of drip course which shall be paid extra. |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo- Mechanically Treated bars of grade Fe-500D or more. |
| 8 | M-150 Brick Work in 1:4 Cement & Coarse sand of 2.20 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work |
| 9 | 12 mm cement plaster of mix 1:4(1 cement: 4 coarse sand) |
| 10 | Neat Cement punning |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 12 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. : In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 14 | Providing wall Putty on old surface with approved quality material of Berger/J.K./Birla or similar make 2 coats. |
| 15 | S/o Wheel Excavator Cum Loader including P.O.L. and Driver complete as per direction of Engineer-in-Charge. |
| 16 | S/o Tractor with Trolley including P.O.L. and Driver complete as per direction of Engineer Incharge.. |
| 17 | Supply of Beldar |
| 18 | Finishing wall with waterproof cement paint of approved make and quality on new wood with two coat to give an even shade including suppy of all materials labour, tools & plant etc. required for proper completion of the work. Same as Item 660 but for weathercoat (Asian or Berger brand) |
| 19 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 20 | Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in- charge (payment for providing grooves shall be made separately). |
| 21 | Providing and laying 60 mm thick factory made cement concrete interlocking paver Block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 22 | Providing and fixing 1 st quality ceramic wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in white, cloudy or ordinary colors. tile size (200x300mm) as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Please Enable Macros to View BoQ information |
