|
| 1 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame incl making good to disturb portion of wall to match with existing surface, complete all as specified. |
| 2 | S & F Pressed steel frames made of MS sheet of 1.20mm thickness of size 125 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish. Cost of the same will be included in this items). As approved by Accepting Officer |
| 3 | S & F Pressed steel frames made of MS sheet of 1.20mm thickness of size 105 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish. Cost of the same will be included in this items). As approved by Accepting Officer |
| 4 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame incl making good to disturb portion of wall to match with existing surface complete all as specified. |
| 5 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and complete all as specified and directed. |
| 6 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as specified and as per drawing. |
| 7 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification incl the fwg S & F As approved by Accepting Officer(a) Stainless Steel (304 Grade) Finished Tower Bolt 150mm long - 2 Nos per leaf(b) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 Nos per leaf |
| 8 | Supply and fixing 30mm thick flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides all as specifid and directed incl S & F fwg items As approved by Accepting Officer.(a) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(b) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf |
| 9 | S & F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-I section 8 clause 8.20 (a) kiln seasoned and chemically pressure treated all as specifeid including stainless steel 304 grade wire cloth ( 0.36mm nominal dia of wire and average width of aperture 1.40 mm ) and incl supply and fixing following items:-(a) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf(b) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf |
| 10 | S & F SS (304 Grade) sliding door bolts of 300mm long with hasp and staple(bolt type) and fixing clips of sheets , fixing bolts and sliding bolts of extruded section with SS Screw, complete all as specified and directed. |
| 11 | S&F 100mm size SS butt hinges and fixed to PVC frame /Wooden Frame and angle iron frame by necessary welding complete all as directed. |
| 12 | S&F for mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed. |
| 13 | M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth, not otherwise specified with two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 14 | M&L for anodised aluminium frame and shutter for door, window, ventilators, partion and sliding shutters etc with one or more rebates including jointing cleat, aluminium snap beading 20 x 15mm, rubber gasket, glazing clip for fixing concealed lock for window etc .complete all as specified and directed by Engr in charge. |
| 15 | M&L powder coated aluminium, frame for ,doors, window, ventilators, partion and sliding shutters etc (minimum thickness of powder coating is 50 mixcron) with one or more rebates including jointing cleat, aluminium snap beading 20 x 15mm, rubber gasket, glazing clip for fixing, concealed lock for window etc .complete all as specified and directed by Engr in charge. |
| 16 | S&F anodised aluminium grill made out of 7mm x 4.5mm w'ide flat, square ractangular or similar section, fixed with channel of size 38mm x 12mm x 13mm (section 8778 complete all as specified including taking down (make: DECO GRILL No. DG 102 with aperture- 80mm or equipment as approved by GE. |
| 17 | S&F 5mm thick tinted sheet glass of approved make and shade/tint filling in aluminium panels door/window/partion with necessary joining cleats, beading all as specified and directed. |
| 18 | S&F 12 mm thick Prelaminated particle board, interior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work |
| 19 | S&F in repair stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staples or with aluminium / wooden beads, stainless steel screws and nuts bolts etc for ventilator complete all as specified. |
| 20 | S&F brass 4 levers mortice lock, vertical type, size 100mm for aluminium door complete all as specified and directed |
| 21 | S&F Aluminium door closer hydraulically aluminium die cast body regulated designation No. 2 universal type (ISI Make) suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 Kg complete all as specified. |
| 22 | S&F double action floor spring hydrucally regulated made up of aluminium 1.25 mm thick aluminium alloy sheet fofoundation box,main body with stainlesssteel cover governing pivot made of brass, other parts made of mild steel heavy duty Please Enable Macros to View BoQ information |
| 23 | S&F double action floor spring hydrucally regulated made up of aluminium 1.25 mm thick aluminium alloy sheet fofoundation box,main body with stainlesssteel cover governing pivot made of brass, other parts made of mild steel heavy duty Please Enable Macros to View BoQ information |
