|
| 1 | Earth work in surface excavation not exceeding 30cm. in depth but exceeding 1.5 meter in width as well as10 Sqm on plan including disposal of excavated earth up to 50 Mtr. and lift up to 1.5 Mtr. disposed soil to be levelled and neatly dressed : All kinds of soil |
| 2 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level IS 456-2000: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). |
| 3 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in: Cement Mortar 1:6 ( 1-Cement : 6-Sand). |
| 4 | Add extra for facing as per design and detailed specifications including additional cost of stones Course rubble facing First sort. |
| 5 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. |
| 6 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20 mm thick . |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 8 | Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide |
| 9 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge. |
| 10 | 1: 3: 6 or richer mix. |
| 11 | Extra if square,rectangular hollow tubelar sections are used or grill made by flats only |
| 12 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 40mm thick with 20mm thick nominal size aggregate. |
| 13 | Supply and fixing Jodhpur sand stone Machine cut Kerb stone (10cm wide 40 cm. height) fixed in white cement sand mortar 1:4 with pigment including EarthWork. |
| 14 | Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) : |
| 15 | Raised and cut pointing. |
| 16 | Deep groove pointing |
| 17 | Providing and laying of paver block as per IS 15658 : 2006 (Indian standard for precast concrete block for paving- specification) and IRC : SP:63-2004 (guidelines for the use of interlocking concrete block pavement) M-40,80mm thick to be used in medium- traffic ( Medium traffic is defined as a daily traffic of 150-450 commercial vehicles exceeding 30 KN laden weight, or an equivalent of 0.5 to 2.0 MSA for a design life of 20 years.) like city streets, small and medium market roads, low volume roads, utility cuts on arterial roads, etc |
| 18 | Category ‘B’ Denated only two side like I,Z,T shape etc. as per IRC SP 63:2004 |
| 19 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). |
| 20 | Repair to stone masonary in cement sand mortar 1:6 with old and new stone. |
| 21 | Building Rubbish Stone metal (Grit and ballast etc.) For 5 Km. |
| 22 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. |
| 23 | 0.80 mm thick with zinc coating not less than 275 gm/m2 |
| 24 | GYM EQUIPMENTS(P&F)SKY WALKER• DIMENSIONS: - 1720mm (Length) x 630mm (Width) x 1750mm.(Height)• SAFE AREA: - 2.7Mtr x 1.6Mtr.• SkyWalker Equipment made from \\"C\\" class G.I. Pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The main frame pipe is of 80mm NB made from \\"C\\" Class G.I. Material which is bend at the radius of 250mm.• The leg movement frame is of 50 x 50mm x 3mm thick CRC square pipe.• Sleeves are made up of 100 mm OD M.S. pipe with thickness 5mm. This results in easyreplacement of bearings, pins and handle.• The handle frame is of 25mm NB made from \\"C\\" Class G.I. pipe.• The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB \\"C\\" class. Welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Two foundations are provided for rigid support.• The footrests made from Aluminum casting material of size 130 X 310 X Smm.• Closing Caps are made up of high quality Fiber reinforced Plastic material.• The pins used are made up of 0 25mm SAE8620 bright material. Pins are fixed at the outerend with M8 grub screws and Dia.8mm SS ball.• The bearings used are \\"6205zz\\" are permanent lubricated sealed bearing of reputedbrand.• High tensile steel with galvanized nuts & bolts are used for assembly.• The cerclips used for assembly are of A24 type.• The powder coating is done with Pure Polyester powder of Ackzo n o bl e or Berger with 60 to 70 micron thickness. |
| 25 | LEG PRESS• DIMENSIONS: - 1840mm (Length) x 360mm (Width) x 1560mm. (Height).• SAFE AREA:- 2.8 x 1.4Mtr.• Leg Press equipment made from \\"C\\" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The center pipe is of 100mm NB made from \\"C\\" Class G.I. pipe.• The Sleeve frame is of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve can be disassembled from main frame.• The bottom support of M.S. round plate of 0250 mm & 10mm thick.• The remaining outer frame is of 32NB made from \\"C\\" class G.I. pipe.• The foundation used for fixing is structure and made from center pipe of G.I. of 80mm NB \\"C\\" class welded with M.S. round plate of 0250mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 3 mm thickness and 20mm x 40mm CRC square pipe of 3mm thickness.• Seat & Back rest provided are made up of MS deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm.• The footrests are made from tasted Aluminum material, having sizes 130mm X310mm X 5mm thick. With the support of 310mm X 130mm X 3mm thick MS plate.• The frame of footrests made up of 25 NB \\"C\\" class G.I. pipe.• Closing Caps are made up of high quality Fiber reinforced Plastic material.• To build structure bushes are used which are made from M . S . seamless pipe of 50mm O.D. and 5mm thickness.• The pins used are made up of 025 mm SAE 8620 bright material.• The bearings used are of \\"6205zz\\" permanent lubricated sealed bearing of reputed Brand.• High tensile steel with galvanized nut bolts are used for assembly.• The cerclips used for assembly are of A24 mm.• The powder coating done with Pure Polyester powder of Ackzo n o b le or Berger with 60 to 70 micron thickness. |
| 26 | ROWER• DIMENSIONS: - 1200mm (Length) x 1000mm (Width) x 920mm. (Height)• SAFE AREA: - 1.5Mtr. x 1.5Mtr.• Rower Equipment made from \\"C\\" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The Main frame is of 80NB \\"C\\" class G.L. Pipe welded with M.S. round plate of 250mmX1Omm.• The handle frame 2 5 N B is made from \\"C\\" class G.I. pipe.• The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB \\"C\\" class Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.• To join the movement frame to main frame connecting links made up from 32 NB G.1. \\"C\\" class pipe.• The seat fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300mmX2mm thickness and deep drawn and pressed intools and dies to have uniform radius of 20 mm with no sharp edges.• Pins used of Diameter 17mm are made up from SAE 8620 bright material.• The bearings used are of \\"6203zz\\" permanent lubricated sealed bearing of reputed brand.• High tensile steel with galvanized nuts and bolts are used for assembly.• The P.U. bushes (Stopper) used to avoid the collision.• The circlips used for assembly is of A 16• The powder coating done with Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness. |
| 27 | CROSS TRAINER• DIMENSIONS: - 1320mm (Length) x 600mm (Width) x 1750mm. (Height).• SAFE AREA: - 1.77 x 1.2Mtr.• Cross trainer equipment made from \\"C\\" Class G.I. Pipe of different N B. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The main frame Pipes are of 80NB \\"C\\" Class G.I. Pipe with single bend pipe with 250mm radius.• The bottom support of M.S. round plate of 0250 mm & 10mm thick.• The Handle Frame is made up of 25NB \\"C\\" Class G.I. Pipe.• The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB\\"C\\" class welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supportedwith 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.• To build structure bushes are used which are made from M . S . seamless pipe of 60mm OD. With 5 mm thickness.• The footrests a r e made from Aluminum casting material of size 130 mm X 310mmX5mm thickness and mounted on M.S. Plate of Size 130mmx310mmx3mm thick• Closing Caps are made up of high quality Fiber reinforced Plastic material.• Pins used o f Diameter 35mm, 25mm, and 17mm are made up from SAE 8620 bright .• T h e Bearings used are of \\"6007zz\\" \\"6205zz\\" and \\"6203zz\\" permanent lubricated sealed bearing of reputed brand.• High tensile steel with galvanized nuts and bolts are used for assembly.• T h e powder coating is done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 Micron thickness.• A16 , A 24 mm circlips are used for assembly.• Bolt M8X16 mm and NY lock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust. |
| 28 | SEATING & STANDING TWISTER• DIMENSIONS: - 1700mm (Length) x 540mm (Width) x 1250mm. (Height).• SAFE AREA: - 3 Mtr x 1Mtr.• Seating &Standing Twister equipment made from \\"C\\" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The Center Pipe is of 100mm NB made from \\"C\\" Class G.I. Round Pipe.• The M.S. round plate of 0250 mm & 10mm thickness is welded at bottom.• Handle and Bottom sleeve pipe of 125mm OD with thickness 5mm provided for easy assembly, replacement and maintenance.• The bottom frame of the Seating & Standing twister is of 32 NB, 50 NB, and 25 NB made from \\"C\\" class G.I. pipe.• The handle frame of Seating & Standing twister is 25 NB & Foot resting frame of seating side is made from \\"C\\" class G.I. pipe of 25mm NB.• The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB\\"C\\" class, Welded with M.S. round plate of 0250 mm& 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRCA square pipes of 3mm thickness.• The Twister plate fitted on the bottom frame is made up of M.S. Round Plate of size 300mm diameter and 10mm thickness.• Closing Caps are made up of high quality Fiber reinforced Plastic material.• The Pins used are made up of 0 35 mm SAE 8620 bright material.• The bearings used are of \\"6205zz\\" permanent lubricated sealed bearing of reputed brand.• High tensile steel with galvanized nuts & bolts are used for assembly.• The powder coating is done by Pure Polyester powder of Berger Paint with 60 to 70 micron thickness. |
| 29 | SEATED PULLER• DIMENSIONS: - 1900mm (Length) x 740mm (Width) x 1920mm. (Height).• SAFE AREA:- 1.2Mtr x 3Mtr• Seated puller equipment made up of \\"C\\" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The center pipe is of 100NB made from \\"C\\" Class G.I. pipe.• Bottom support i s of M.S. round plate of 0 250 mm & 10mm thickness is welded.• All linkages are made up of 25NB \\"C\\" class G.I. pipe.• The handle frame is of 32NB \\"C\\" class G.I. pipe.• The seat frame is of 32NB \\"C\\" class G.I. pipe,• To build structure bushes are used which are made from seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used.• The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB \\"C\\" class. Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.• Foundation cover Closing Cap is made from FRP Material with 0.7 mm Thickness.• The seats and Back rests are fitted on the outer frames a r e made up of M.S. Sheet of size 330 mm X300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.• Closing Caps are made up of high quality Fiber reinforced Plastic material.• Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material.• The bearings used are of \\" 6205zz\\" and \\"6203zz\\" permanent lubricated sealed bearing of reputed brand.• High tensile steel with galvanized nuts & bolts are used for assembly.• The cerclips used for assembly are of A16• The powder coating done with Pure Polyester powders of Ackzonoble or Berger Paints with 60 to 70 micron thickness. |
| 30 | CHEST PRESS CUM SEATED PULLER• DIMENSIONS: - 2000mm (Length) x 710mm (Width) x 2200mm. (Height).• SAFE AREA: - 3.0 Mtr x 1.7Mtr.• Chest press cum seated puller equipment made up of \\"C\\" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• The center pipe is of 100NB made up of \\"C\\" Class G.I. pipe.• The bottom welded with support of M.S. round plate of 0250 mm & 10mm thickness.• The connecting pipes are made up from 25NB \\"C\\" class G.I. pipe.• The handle frame is made up from 32NB \\"C\\" class G.I. pipe.• To build structure bushes are used which are made from seamless pipe of 50mm O.D. and 6mm thickness as well as 50mm diameter solid bar is used.• The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB \\"C\\" class welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.• The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.• Closing Caps are made up of high quality Fiber reinforced Plastic material.• Pins used of Diameter 25mm and 17mm are made up from SAE 8620 bright material.• The bearings used are of \\"6205zz\\" &\\"6203zz\\" permanent lubricated sealed bearing of reputed brand• High tensile steel with galvanized nuts & bolts are used for assembly.• The cerclips used for locking is made up of A24 & A16• The powder coating done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness. |
| 31 | THI-CHI SPINNER (2 WHEEL)• DIMENSIONS: - 700mm (Length) x 1000mm (Width) x 1280mm (Height).• Safe Area:- 1.9Mtr X 1.9Mtr• Thai chi spinner Equipment made up of \\"C\\" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters.• The center pipe is of 100NB made up of \\"C\\" Class G.I. pipe.• The handle movement round frame is made up from 25 NB \\"C\\" class G.I. pipe• The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB \\"C\\" class Welded with M.S. round plate of 0250 mm & 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.• Closing Caps are made up of high quality Fiber reinforced Plastic material.• The pins used are made up of 0 25 mm of SAE8620 bright material.• The bearing used is \\"6201zz\\" &\\"6205zz\\" permanent lubricated sealed bearing of reputed brand.• High tensile S. S. nut bolts are used for assembly.• Foundation cover Closing Cap is made from FRP Material with 0.7 mm thickness.• The cerclips used for assembly is of A24 and All.• The nylon bush is used for handle knob.• The powder coating done with pure Polyester powders from Ac kzo n o b I e or Berger Paints with 60 to 70 micron thickness.• Bolt M8X16 mm and Nylock nut of M8 made of SS 304 used on nylon cap mounted on pins to protect bearings and pins from rain and dust. |
| 32 | SURFING BOARDDIMENSIONS: - 1000mm (Length) x 600mm (Width) x 1400mm.(Height).• Safe Area:-1.5 x 1.3Mtr.• Surfing Board Equipment made from \\"C\\" Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters• T h e main frame is of 80mm NB made from \\"C\\" class G.I. pipe.• The bottom support welded of M.S. plate of 0 250 mm & 10mm thickness.• The handle frame is of 25N B made from \\"C\\" class G.I. pipe.• The foundation used for fixing is a structure and made from center pipe of G.I. of 80NB \\"C\\" class welded with M.S. round plate of 0250 mm & 10rnm thick. Mainpipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.• Bushes are used 70mm Outer Diameter with 5mm thickness is used.• The footrests made from high quality fiber reinforced plastic.• Closing Caps are made up of high quality Fiber reinforced Plastic material.• T h e pins used are made up of 035 mm SAE 8620 bright material.• The bearing used are of \\"6007zz\\" permanent lubricated sealed bearing of reputed brand.• High tensile steel with galvanized nut bolts are used for assembly.• T h e cerclips used for assembly is of A34.• The powder coating is done with Pure Polyester powder of Ackzonoble or Berger with minimum 60 to 70 micron thickness. |
| 33 | BACK EXTENSIONDIMENSIONS: - 1400mm (Length) x 700mm (Width) x 820mm (Height). SAFE AREA: - 2.4Mtr x 1.7Mtr.Back Extension Equipment made from \\"c\\" G.I. Pipe of different NB pipe. (NB stands for Nominal Bore i.e. Internal Diameter of pipe in mm). The main frame is of 50mm NB made from \\"c\\" Class G.I. pipe. The Foot resting frame of 32mm NB made from \\"c\\" Class G.I. pipe. The handle frame is of 25NB made from \\"c\\" Class G.I. pipe. The seat fitted on the outer frames i s made up of M.S. Sheet of size 330mm X 300mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. The foundation used for fixing is consists of 50mm NB made from \\"c\\" Class G.I. pipe. The footrests are made from casted Aluminum material, having sizes 130 x 310 x 5 mm thick. With the support of 250mm X 115mm X 3mm thick MS plate. The powder coating done with Pure Polyester powder o f Ackzonoble or Berger with 60 to 70 micron thickness. |
| 34 | Provinding and fixing of double swing top pipe made of structural steel tubular Pipe up to100 mm nominal bore, 3.0 mtr Long jointed with four nos legs of 100 mm nominal bore 3.00 meter long pipe after installation 2.40 mter with the help of specially designed trapeze shape 50 mm structural steel tubular Pipe bouble swig have two nos specially designed ball bearing system each ball bearing system contain two nos ucp 205 casted ball bearing assembly , one nos 27 mm x 600 mm long MS solid bearing shaft and two nos press bented (1)hoocks for hanging chain seats chain should be minimum 6 mm thick electro galvanised tested jointed with M.S. Sheet 5mm thick for safe and cofortable swing all Nut and Bold Jointed, painted in multi colour for dazzling look Double swiing fixed in ground with cement concrete mix 1:2:4 size 30x30x45 cm including exacavation of earth as per required work completed as per direction of engineer in change and specified notes. Work done as per Drawing direction of engineer in charge and specified notes. |
| 35 | Deluxe Slide made of 3 mm thick M.S. Sheet joint less bend in (C ) channel the length of slide 3mtr. and width 0.45 mtr. jointed with 25mm nominal bore Structural steel tubular Pipe and verticle post of 100mm Structural steel tubular Pipe 2.5 mtr. long. Pipe railing, ladder made up of 25mm & 50mm nominal bore Structural steel tubular Pipe. All Nut and Bold Jointed, painted in multi colour for dazzling look. Deluxe slide fixed in ground with cement concrete mix (1:2:4) size 30x30x45 cm includig exavation of earth as per required. Work done as per Drawing direction of engineer in charge and specified notes. Please Enable Macros to View BoQ information |
