|
| 1 | Dismantling Brick work including labours as per direction of departmental officers., |
| 2 | Earth work Excavation in all soils with initial lead and lift etc., complete |
| 3 | Cement Concrete Broken Stone in Cement mortar 1:4:8 mix using 40mm metal granite stone etc complete., |
| 4 | Supplying and erecting in the position of centering for sides and soffits including necessary supports and strutting with all cross bracings using mild steel sheet boarding etc., completed |
| 5 | Supply and Fabrication of RTS Rods in Various Dia. Including Cutting, Bending and Tying with all Labour Charges Etc., Complete. |
| 6 | R.C.C 1:1/2:3 mix using 20 mm hbg metal including all cost etc complete |
| 7 | Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4\\" x 41/4\\" x23/4\\") including cost of materials and labour charges etc., as per standard specification - 1m3 |
| 8 | Plastering for brickwork and concrete surfaces using cement mortar 1:5 (One part of cement, five parts of sand by volume) thickness 12mm (average) for all internal/external surfaces like superstructure, rainwater ducts, elevation |
| 9 | Supply and Filling with Well gravel including cost and conveyance of alll materials and all labour charges |
| 10 | Supplying and Laying Rubber Moulded Hydraulic Pressed Paver Block Providing and laying of 83 mm thick high strength of Hydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications |
| 11 | Painting with plastic emulsion paint in two coats over a base coat of Primer in approved colour and quality etc., complete. |
| 12 | Paving the floor with vitrified Floor Tiles of size 60 x 60 cm. of approved brand and colour Marbonite tiles in all floors base layer of cement mortar 1:3 (one cement and three sand) 20mm thick using first quality Marbonite tiles of size 60x60 cm and point with colour cement neatly and fixed in position so as to make perfectly smooth and to alignment etc. complete complying with standard specification. |
| 13 | Daddoing the walls with first quality approved white glazed tiles of size 150X150X6 mm laid in cement mortar 1 1:2 mix to 10mm thick and painting painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete - 10 m2 |
| 14 | S/F of MS Truss with purlins including all labours and transports charges as per direction of departmental officers., |
| 15 | POLYURETHANE FOAM THERMAL INSULATION PANELS (PUF)Providing and Fixing of polyurethane foam as External Wall Thermal insulation panels or Sandwich insulated panels with external 0.30mm total coated thickness pre painted galvalume sheet with micro ribbed profile, whereas internal 0.30mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free , high performance rigid olyurethane foam (PUF) conforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessoriessuch as screws ,fastners ,sealants etc for fixing the panel etc., complete complying with standard specification. |
| 16 | Conveyance of Surplus earth from work site to City outer with average lead of 15 km etc. complete as per direction of departmental officers |
| 17 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator) |
| 18 | Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box inflush with wall with 3mm thick hylum sheet cover for 5A 3pin non interlocking flush type CS plug with painting of suitable colour with continuous earthwire connection of 14SWG TC wire for open plug point |
| 19 | Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting |
| 20 | Supply and fixing of 1200mm (48\\") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\") |
| 21 | Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., |
| 22 | Providing RCC post and Slab fencing by using precast RCC post of size 0.15x0.15m and height of 2.10m at the interval of 1.80m inserting between precast RCC post and precast Rcc slab size 1.80mx0.30m of 5 nos in vertical 1.50m and thickness of 5cm thick , inculding cost of all materials and labour charges for fixing inposition etc.,complete (M.Sand) |
| 23 | Supplying and fixing of Cudappa slab of 40mm thick for Cup board including cost of materials and labour etc complet Please Enable Macros to View BoQ information |
