|
| 1 | Dismantling the damaged RCC as per directed by the departmental officers |
| 2 | Dismantling the damaged Plain cement concrete as per directed by the departmental officers |
| 3 | Dismantling the damaged brick work as per directed by the departmental officers |
| 4 | Earth work excavation for foundation in ordinary soil, light black cotton sandy loam and dry silt including shoring, strutting, baling or pumping out water wherever necessary and refilling the sides of foundation with excavated earth in layers of 15cm thick and depositing the surplus earth at places as directed by the departmental officers with initial lead and lift - 10 m3 |
| 5 | Supplying and filling in foundation and basement withWell Gravel in layers of not more than 15 cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 6 | Conveyance of excavated earth and clearing away from site to a lead of 2KM from site etc., complete |
| 7 | Plain Cement Concrete1:4:8 (one part of cement, four part of Crushed Stone Sand (M-Sand) and Eight part of coarse aggregates ) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 8 | Plain Cement Concrete1:2:4 (one cement, two Crushed Stone Sand (M Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 9 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc., including strutting 3 m high using mild steel sheets of size 90 cm X 60 cm X and B.G10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size10cm X 6.5cm (spacedat about 90 cmc/c)and supported dycasur in a props of 10 cm to13 cm dia (spacedof75cmC/C)complying with standard specification and directed- 10 m 2 (P & D) Data 38 |
| 10 | Suppling and fabricating and placing in position MS (or)R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 11 | Reinforced Cement concrete 1:1.5:3 (one cement,one and half M.sand & three course aggregate) using 20 mm gauge hand broken/and broken granite stone for all RCC items of works excluding centerings huttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. CCMC SOR-25-26 Pg.no-5 |
| 12 | Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230 x 110 x 70 mm (83/4\\"x41/4\\"x23/4\\") including cost of materials and labour charges etc., as per standard specification - 1m3 |
| 13 | Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P-Sand)),10 mm thick in all floors including cost and conveyance of all materilas to site and labour chargesetc,completeas per standard specifications |
| 14 | Plastering with cement mortar 1:5(One part of Cement and Five part of Plastering Sand (P-Sand))12mm in all floors including cost and conveyance of all materilas to site and labour chargesetc,completeas per standard specifications |
| 15 | Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600 x 600 x 8 mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P-Sand)), 20 mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid with out any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work |
| 16 | Paving the floor with design Antiskirt ceramic tiles (colour and shadeas directed)of size 305 mm x 305 mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P-Sand)), 20 mm thick laid in-situ and pointed with same coloured cement |
| 17 | Dadooing walls with ceramic tiles of sizes 300 mm X 450 mm X 8 mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P-Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 18 | Weathering Course with Concrete Broken Brick (S.I.No.278) & (P&D) Data 54.Jelly 20mm gauge in pure slaked lime (nosand tobeadded) over roof slab,the proportion of brick jelly to lime being '32 to12.5 well beated with wood enbeaters forgiving required slope and thicknessas directed by the departmental officers etc., complete.-10 cum |
| 19 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar1:3 (One part of Cement and Three part of Plastering Sand (P-Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete |
| 20 | Fabricating supplying and fixing of pre-painted galvanium colour sheets with the following specification. Thematerials should be of PPGI tile profile with a red colouror anyotherapproveddesign0.47mm thick 24 guage having width1050 mm. The sheet should be G.I.base pre-painted hot dipped galvanized iron sheet and to be fixedwith shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z120 GSM paint thickness the finish shouldbe terracotta finish like malabar mangalore tiles finish optionalmatt finish. The sheet tobe fixedwith making suitable corrugated, cutting the sheet into the requireds size and making ornamental designs as per the site condition and as directedby the departmental officers. |
| 21 | Supplying, fabricating, erecting structural steel work for roofing weldedor bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal paintingas per Design given by the departmental officers etc, complete as per standard specification |
| 22 | Painting two coats for Interior surfacewith approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc completeand including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 23 | Painting two coats for Exterior surfacewith approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc completeand including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 24 | Painting two coats with Ready Mixed Enamel Paint over thenew iron works of approved quality and colour with out priming coat includingthe cost all materials etc.,complete, in all floors. |
| 25 | Painting with Ready Mixed Enamel Paint over the new wood works of approved quality and colour without priming coat including the cost all materials etc., complete, in all floors. |
| 26 | Supplying and laying Rubberised interlocking Paver block M40 grade Providingand layingof 63mm thickhighstrengthtypeconformingIS 15658-2006 of rubberized interlocking paver lock in size ofminimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mmthick laying out of pavement cut thepieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. |
| 27 | Solid PVC door shutters using 19 Gauge 1gmm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered thick solid PVC sheets. Shutter using smm thick solid PVC sheets for paneling shall rigidly in position including fixed necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rebale for housing the shutter and should have provision to fix AL drops, tower bolt hinges and lock plates inclusive of cost of all materials etc. complete complying with the standard specifications. |
| 28 | Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug. |
| 29 | Supply and fixing PVC Water Tank as per directed by the departmental officers |
| 30 | Supply and Delivery of PVC Pipe as per directed by the departmental officers |
| 31 | 25mm pvc pipe |
| 32 | 32mm pvc pipe |
| 33 | 110mm pvc pipe |
| 34 | 75mm pvc pipe |
| 35 | Supply and Delivery of PVC specials as per directed by the departmental officers |
| 36 | Coupler |
| 37 | 25mm dia |
| 38 | 32mm dia |
| 39 | Elbow |
| 40 | 25mm dia |
| 41 | 32mm dia |
| 42 | 25mm dia |
| 43 | 32mm dia |
| 44 | 25mm dia |
| 45 | 32mm dia |
| 46 | End cap |
| 47 | 25mm dia |
| 48 | 32mm dia |
| 49 | Reducer |
| 50 | 20mm x 15mm |
| 51 | 25mm x 20mm |
| 52 | 32mm x 25mm |
| 53 | Reducer tee |
| 54 | 20mm x 15mm |
| 55 | 25mm x 20mm |
| 56 | 32mm x 25mm |
| 57 | Reducer Elbow |
| 58 | 20mm x 15mm |
| 59 | 25mm x 20mm |
| 60 | 32mm x 25mm |
| 61 | Jet Nipple |
| 62 | 25mm dia |
| 63 | 32mm dia |
| 64 | PVC Elbow |
| 65 | 110mm dia |
| 66 | 75mm dia |
| 67 | Pvc elbow with door |
| 68 | 110mm dia |
| 69 | 75mm dia |
| 70 | Pvc tee |
| 71 | 110mm dia |
| 72 | 75mm dia |
| 73 | Pvc tee with single door |
| 74 | 110mm dia |
| 75 | 75mm dia |
| 76 | Pvc \\" Y \\" with single door |
| 77 | 110mm dia |
| 78 | 75mm dia |
| 79 | Supply and fixing of Brass Chromium Plated Pillar Tap (Heavy Type) - 15 / 12mm dia as per directed by the departmental officers. |
| 80 | Supplying and fixing in position Indian water closet of size 580 X 440 mm, white glazed earthenware of approved quality with 'P' trapor 'S' trap confirming to IS :2556- Part XII with sand cushion and forming flooring alround the closet using 40 mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly)100 mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes / PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slabandmaking good the disturbedportion tooriginal conditionwithout leakage etc., complete complying with standard specification sand as directed by the departmental officers. |
| 81 | Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100 mm“P”or“S”trap connecting with CI pipe of 100 mm dia/ PVC pipe of 110mm dia,double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spunyarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings,suchas, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flushh and using Indian adopter joint including all internal fittings, suchas, 15mm bras connections,15 mm GM wheel valve,15 mm brass nipple (2Nos.),15 mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition,etc.,complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting. |
| 82 | S/F in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I. Pipe connection to suitable length, 32 mm bell mouthed P.V.C connection ,15 mm dia G.M.Wheel valve, fixing the urinal to the wall inposition with necessary T.W.plugs , clamps, screws, shellac etc.,including dismantling masonry if necessary and re doing thesame tooriginal condition ,fixing the15mm dia. G.I.pipe connection andwheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked with out any leakage complete, complying with standard specifications.-White Colour. |
| 83 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthenware wash hand basin of size 550 x 400mm (with pedestal) with a pair of cast iron brackets, including cost 1smm dia brass CP pillartap. 32mm dia \\"8\\" class Gl waste pipe with rubber plug and chain.15mm dia GM wheel valve. 1smm brass nipple, 'smm dia nylon connection, 32mm dia CP brasswastecoupling including fixing of wash basin using Cl brackets on to the wall in position with TW plugs and screws, rubber washers, white supply connection and painting lead and giving necessary water thebrackets with two coat of painting over a priming coatl of anti-corrosive paint including testing for teakages etc., complete complying specification and as directed by the departmental officers. (Thel wash hand basin and specials should be got approvedl by the Executive Engineer before use on with standard works). |
| 84 | Wiringwith2x1.5 sq.mm. PVC insulated single coreunsheathedFRLScopper conductor cableof 1100Vgrade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5 A FT switch with painting of suitable colour continuous earth wire connection of 1.5 sq.mm copper wire for lightpoint / fanpoint (for electronic regulator) |
| 85 | Supply and fixing of 1200 mm (48\\")sweep AC ceiling fan complete with stepped electronic 300 W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\") |
| 86 | Supply and fixing of 4 Feet LED18W Fitting with LED18W tube (Lower End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting. |
| 87 | Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb as directed by the departmental officers. |
| 88 | Wiring with 2 x1.5 sq.mm. PVC insulated single coreunsheathedFRLScopper conductor cableof 1100Vgrade in suitable heavy gauge MS conduit pipe onwall and ceiling with MS accessories in flush with wall with 150 mm x 100 mm x75mm MS switch box with 3mm thick hylum sheet cover for 5A 3 pin non interlocking CS plug with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for concealed plug point Please Enable Macros to View BoQ information |
