|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE 881 EWS C/O 56 APO NAME OF WORK: Repair to certain bldg periodical services, repair to sewage line and electrification work & misc repair of RR under AGE B/R-III of GE 881 EWS. Contract No: GE/PNH-30/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each, complete all as specified and directed. |
| 3 | Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each, complete all as specified and directed. |
| 4 | PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in filling of hold fast and steel door frames etc. complete all as specified and directed. |
| 5 | Factory made pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & tarring back of chowkats and hold fasts including filling hollow portion of frame with PCC type B-0 1:3:6 (using 12.5 mm graded aggregate etc.) complete all as specified & directed. |
| 6 | Applying two coats of synthetic enamel paint of Ist quality over a coat of red oxide zinc chrome primer to new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed. |
| 7 | 35mm thick 2nd class soft wood (kail) plain, framed, panelled door shutters (two number of panels), with panels of timber flat on both sides (feather edged), or of 12mm thick veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified & directed. |
| 8 | 35mm thick 2nd class hard wood Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified & directed. |
| 9 | Preparation of new wooden surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer,complete all as specified & directed. |
| 10 | Galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire staples, complete all as specified & directed. |
| 11 | Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed. |
| 12 | Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. with & including 5.5mm thick sheet glass ordinary quality, complete all as specified & directed. |
| 13 | Sheet glass ordinary quality, 5.5mm thick, glazing with glazing pins and securing with rubber neoprene packing to aluminium frame in squares exceeding 0.50Sqm in each pane fixed in repairs, complete all as specified & directed. |
| 14 | Prelaminated particle board, 9mm thick, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work/metal frame work complete all as specified & directed. |
| 15 | 100mm mortice lock, vertical type with 4 lever fixed in repairs complete all as specified and directed. |
| 16 | Door closer hydraulically regulated (Aluminium extruded section body) , designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg,complete all as specified and directed. |
| 17 | Supply and fixed in repair door closer hydraulically regulated (Aluminium extruded section body) , designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg,complete all as specified and directed. |
| 18 | Mild steel butt hinges, medium weight, cold rolled,100mm long fixed, complete all as specified and directed. |
| 19 | Aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed. |
| 20 | 250mm long aluminium alloy anodized sliding door with haps, staple (bolt type) and fixing clips of sheets, cast or extrusted sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 21 | Extruded aluminium alloy handles, fabricated type, anodised of size 150mm and fixed, complete all as specified and directed. |
| 22 | 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 23 | S&F in repair floor door stopper of aluminium alloy body with over all length of cover plate of 140mm and tongue, anodised, with hard drawn steel spring complete all as specified and directed. |
| 24 | Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified and directed. |
| 25 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 26 | Factory made solid panel PVC door shutter 30mm thick(Stiles) consisting of frame made out of MS tubes for top and bottom rails. MS frames shall be covered with heat moulded plain coloured PVC,C, channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame with 3 Nos stainless steel hinge 100 mm size, welded/sealed to the stiles rails with suitable PVC sheet beading and jointed together with solvent cement. S&F in the frame as per manufacturer's instructions complete all as specified and directed. |
| 27 | Anodised aluminium window and ventilator shutters and frames fixed type/sliding type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handle, locking arrangement, rollers etc. complete all as specified and directed. |
| 28 | Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. with & including necesarry fittings, complete all as specified & directed. |
| 29 | Supply and fixed in repair stainless steel wire cloth 0.36 mm niminal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel staples complete all as specified and directed. |
| 30 | Hacking out old broken glass (any thickness, size, quality or description) from wooden / steel frames or stone/ concrete, glazed with putty or fixed with beads, complete all as specified and directed. |
| 31 | Sheet glass ordinary quality, 3mm thick, glazing with rubber neoprene packing to aluminium frame in squares not exceeding 0.50 Sqm in each pane, complete all as specified. |
| 32 | Dismantling of ceiling boards (fibre, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 33 | False ceiling calcium silicate fissured pattern semi perforated butt edge ceiling tiles , of size 600mm x 600mm x 6mm thick having thermal conductivity K=0.15 W/mOK, having fire performance (BS-476) fixed with and including grid system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38 mm, having 0.25mm gauge at every 1200 mm centre to centre maximum and rotary stitched cross tee of size 24 x 38 mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25 mm gauge at 1200 mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall and suspended with hangers at every 1200 mm c/c in both directions using 4.0mm dia pre-straightened GI wire fixed with suitable cleats and fastners complete all as specified and directed. |
| 34 | Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site but wood grain printed PVC sheet used instead of plain colour sheet as per specifications and drawing complete all as specified and directed. |
| 35 | 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 36 | Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering, all as specified and directed. |
| 37 | Pre- painted galvalume aluminum zinc coating GI based corrugated (profile pattern) steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed by Engineer- in Charge. |
| 38 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge covering/cladding to wall,fixed with self tapping screws as specified and directed by Engineer- in Charge. |
| 39 | Taking down cement plaster from brick or stone walls hacking for keys & scrubbing down with water including raking of joints etc as in patches complete all as specified and directed. |
| 40 | Rendering 15mm thick on other than fair faces of brick or stone masonry wall surfaces in cement mortar 1:4 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 41 | Rendering 10mm thick on fair faces of brick work or concrete surfaces on walls in cement mortar 1:6 and finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 42 | Rendering 5mm thick on fair faces of ceiling using cement mortar 1:3 and finished the surface even and smooth without using extra cement, complete, all as specified and directed. |
| 43 | Preparation of newly plastered or unplastered surface of wall and applying two coats of cement base paint in camouflage pattern over a coat of Primer complete all as specified and directed. Note:- Camouflage pattern shall be approved by Engineer in charge. |
| 44 | Preparation of newly plastered or unplastered surface of wall and applying two coats of Oil Bound Distemper (any tint) over a coat of primer including 3mm thick wall care putty complete all as specified and directed |
| 45 | Preparation of newly plastered or unplastered surface on ceiling and applying two coats of white wash complete all as specified and directed. |
| 46 | Preparation of old plastered or unplastered wall surfaces and applying one coat of cement base paint , complete all as specified and directed. |
| 47 | Complete removal of existing treatment on plastered surface of wall and applying two coat of cement base paint in camouflage pattern over a coat of alkali resistant primer complete all as specified and directed. Note:- Camouflage pattern shall be approved by Engineer in charge. |
| 48 | Preparation of old plastered or unplastered wall surfaces including washing,scrubbing down and stopping of distermperd surfaces and applying one coat of oil bound distemper, complete all as specified and directed. |
| 49 | Preparing old plastered or unplastered surface on ceiling and applying one coat of white wash complete all as specified and directed. |
| 50 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 51 | Steel water tubing of 15 mm dia bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed.. |
| 52 | Taking up or down steel tubing of 20mm dia bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, Complete all as specified and directed. |
| 53 | Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified. |
| 54 | Supply and fixed in repair 15mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified and directed. |
| 55 | 500 ltr capacity rotational moulded polyethylene water storage tanks, double layer(Cylindrical vertical with threaded close top), ISI marked and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed. |
| 56 | 1000 ltr capacity rotational moulded polyethylene water storage tanks, double layer(Cylindrical vertical with threaded close top), ISI marked and fixed in position, all as specified in SSR Part-I, including dismantling of old water tank of any description, complete all as specified and directed. |
| 57 | Tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm 45gms /25mm- 65gms) complete all as specified and directed |
| 58 | Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore fixed in repair, complete all as specified and directed. |
| 59 | Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 15mm bore fixed in repair, complete all as specified and directed. |
| 60 | Supply and fixed in repair bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed. |
| 61 | Supply and fixed in repair 15mm bore bib taps Standard of PTMT any colour high pressure, screwed both ends for iron pipe or for brass ferrule (min weight 15mm-90gms), complete all as specified and directed. |
| 62 | 15mm bore Stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, complete all as specified and directed. |
| 63 | Supply and fixed in repair, Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed. |
| 64 | Supply and fixed in repair, 15mm bore angle stop valve of PTMT any colour high pressure screwed for iron pipe or fixed (minimun weight 15mm-90grms), fixed, complete all as specified and directed. |
| 65 | Supply and fixed in repair 15mm bore pillar tap cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule complete, all as specified & directed. |
| 66 | Supply and fixed in repair 15mm brass chromium plated WHB mixer (central hole basin mixer w/o pop up waste system) for mixing hot & cold water screwed down for iron pipe, complete all as specified and directed. |
| 67 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 68 | Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, snow white, with 'P' or 's' trap, front or back inlet and integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and siphonage pipe etc. fixed in repairs including lime concrete bedding, complete, all as specified & directed. |
| 69 | Supply and fixed in repair vitreous China wash down water closet pan (pedestal pattern),white (excluding fixing bolt,flushing cistern and flushing pipe) complete all as specified & directed. |
| 70 | Supply and fixed in repair Plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised or PVC hinging device, complete all as specified & directed.. |
| 71 | Supply and fixed in repair PVC valve less, symphonic action type flushing cistern 7.5 ltrs capacity low level, with inlet, ball valve float, flush pipe and handle including brackets complete all as specified & directed. |
| 72 | Supply and fixed in repair wash basin, Vitreous China (flat back or angle back type) of size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe as specified and directed. |
| 73 | Vitreous china urinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing with automatic flushing cistern with brackets, flush pipe, waste pipe grating and union for discharge pipe, fixed in repair complete all as specified and directed. |
| 74 | PVC (SWR) floor trap, plain with grating including jointing with solvent cement, 75/110mm diameter of outlet,complete all as specified and directed. |
| 75 | Supply and fixed in repair grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) |
| 76 | S&F in repair 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround, mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws, complete all as specified and directed. |
| 77 | Bathroom mirror cabinet plastic body white coloured, wall mounted of size 47.40X37.60X19.20 cm, minimum wt 3.20 Kg, rectangular shaped complete all as specified and directed. |
| 78 | S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified directed. |
| 79 | Supply and fixed in repair towel ring of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats(minimum weight 90 gms) complete all as specified and directed. |
| 80 | S & F in repairs flexible waste pipe for wash hand basin fitted to Wash Hand Basin incl all necessary brackets etc all as specified and directed by Engr-in-Charge. |
| 81 | Supply and fixed in repair Waste coupling , 32mm dia, of CP (half or full threaded) (Minimum weight 32mm-45gms/40mm-60gms) complete all as specified and directed. |
| 82 | PVC connection 15mm bore with PTMT nuts of length 450 mm long complete all as specified and directed. |
| 83 | PVC (SWR), type B, 75mm dia any length single socketed with rubber ring joint, laid in trenches, floor/walls as soil pipe(vent pipe), complete all as specified and directed. |
| 84 | PVC (SWR), type B, 100 mm dia any length single socketed with rubber ring joint, laid in trenches, floor/walls as soil pipe(vent pipe), complete all as specified and directed. |
| 85 | PVC (SWR) bends suitable for 75 mm external dia complete all as specified and directed. |
| 86 | PVC (SWR) bends suitable for 110 mm external dia complete all as specified and directed. |
| 87 | Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 88 | Glazed ceramic coloured tiles (350x250mm)/(450x350mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge. |
| 89 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 90 | Vitrified Ceramic tiles 8 to 10 mm thick area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:4,complete all as specified and as directed by Engr-in-Charge |
| 91 | Description all as per item No 88 above but as in vertical surface in skirtings,dados including 10 mm thick back coat in CM 1:4, complete all as specified and as directed by Engr-in-Charge. |
| 92 | Opening of cover (of any description and size) of septic tanks and soakage wells/pits, de-sludging / de-watering of septic tanks and soakage wells/pits of any size and depth by using honey sucker/sludge sucker Vehicle of carrying capacity of of 2000/3000 ltr and dispose sludge minimum 1 Km away from periphery of defence land at his own arrangement where sanitary hazards do not take place as per directions/ instructions of civil authority and burried in excavated pits and covering the same including refixing covers after cleaning all as specified and directed. NOTE:- Unit rate quoted by tenderer shall include taking out sludge from septic tanks and soakage wells/pits (liquid/semi liquid / solid) , excavation of borrow pits for dumping sludge , removing including loading/ unloading and transportation etc. Note: ST/SW will be clean by Honey sucker only as per direction of Engr -in-Charge. |
| 93 | Cleaning / clearing & maintenance of sewage lines any bore, manholes including CI stacks gully traps,floor traps under ground lines any depth by removing any type of blockage from drain 100/150mm dia by roding from manholes to manholes and flushing after cleaning including manholes sludge/ sludge water to be disposed off outside the periphery of defence land including taking off manhole covers and re-fixing the same after cleaning sewage lines. Sewage lines cleared/cleaned under this item are to be maintained and kept fully functional by removing any type of blockage. The cost of this operation /provision shall be deemed to be included in unit rate quoted by the contractor, the cost of which shall also be deemed to be included in the said item, complete all as specified and as directed. |
| 94 | Cleaning of blocked WC up to first manhole and making the drain pipe of any dia fully functional by flushing with water to entire satisfaction of Engr-in-Charge including disposal of sludge outside the periphery of defence land at his own arrangement where sanitary hazards do not take place as per directions/ instructions of civil authority and burried in excavated pits all as specified and directed.Note:- Unit rate quoted by tenderer shall include clearing blockage, taking out sludge(liquid/semi liquid/solid ) , excavation of borrow pits for dumping sludge, removing including loading/unloading and transportation etc. |
| 95 | Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level and reinforcement cut as required to facilitate demolition) complete all as specified and as directed. |
| 96 | 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor finish and finished with surface even and fair, complete all as specified and directed. |
| 97 | Chequered cement concrete tiles 300x300x 25mm thick, set, jointed in neat cement slurry in floors and pointed with mixture of white & grey cement in equal proportion & no pigment laid over and including 15mm thick screed bed in CM 1:4,complete all as specified and directed. |
| 98 | Dry Sand filling under floor in layers not exceeding 15 cm, levelling and ramming to required level complete all as specified and directed. |
| 99 | Rubber moulded machine pressed precast concrete coloured interlocking paver block with grey cement and colour pigment, any shape and size confirming to IS 15658-2006 of 60 mm thick, M-35 grade complete all as specified and directed. |
| 100 | Rubber moulded machine pressed precast concrete coloured interlocking paver block with grey cement and colour pigment, any shape and size confirming to IS 15658-2006 of 80mm thick, M-40 grade complete all as specified and directed. |
| 101 | Dismantling of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 102 | Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 103 | 50 mm thick PCC 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, including filled the joints with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed. |
| 104 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18Sqm but n exc. 0.38Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 105 | Description all as per item No 102 above but as in vertical surface in skirtings,dados including 10 mm thick back coat in CM 1:4, complete all as specified and as directed by Engr-in-Charge. |
| 106 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06Sqm but n exc. 0.11Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 107 | Glazed ceramic coloured tiles 300X200X7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge. |
| 108 | Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed by Engineer- in Charge. |
| 109 | Taking down chowkhats or frames n. exc 1.5 Sqm but (without taking off shutters from frame) complete all as specified and directed. |
| 110 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 111 | Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge, Paneling of 2mm thick prelam PVC sheet on both faces i.e. front face & back face with particle board core to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, and including all hardware necessary for a door supplying & fixing in the frame at site as per specification & drawing. given SSR 2010 complete all as specified and directed. |
| 112 | Aluminium anodised, barrel tower bolts of extruded section of size 100mm and fixed, complete all as specified and directed. |
| 113 | Extruded aluminium alloy handles, fabricated type, anodised of size 100mm and fixed, complete all as specified and directed. |
| 114 | Taking down aluminium door/window of any discription complete all as specified and directed. |
| 115 | Preparation of old plastered/ un-plastered wall surfaces including brooming down or steel wire brushing, scraping down, smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots, and applying one coat of white wash on walls including cornices, pilasters etc, complete all as specified and directed. |
| 116 | Preparation of old painted steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint in, complete all as specified and directed. |
| 117 | Preparation of old painted surface of wood/wood based of any description, over 10cm width or girth and applying one coat of synthetic enamel paint in, complete all as specified and directed. |
| 118 | Supply and fixed in repair 15mm bore pillar tap fancy type, cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule complete, all as specified & directed. |
| 119 | Supply and fixed in repair 32mm bore PVC waste pipe complete al as specified and directed. |
| 120 | Supply and fixed in repair CP jet spray with holder for EWC, 1.5 long complete all as specified and directed. |
| 121 | Vitreous china squatting pan (pedestal pattern), snow white, with 'P' or 's' trap, front or back inlet and integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and siphonage pipe etc. fixed in repairs including lime concrete bedding, complete, all as specified & directed. |
| 122 | Supply and fixed in repair chromium plated telephonic health faucet shower with flexible tube of stainless steel, 1.5 Mtr long and hook, multi flow 15mm dia for iron pipe or for brass ferrule complete all as specified and directed. |
| 123 | Supply and fixed in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of 20 mm dia complete all as specified and directed (Minimum Wt 210 gms). |
| 124 | E/M PORTION:-Taking down carefully copper/ aluminium unserviceable/ perished point wiring with casing caping (light, fan, socket or power complete) including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site and making good disturbed surfaces of wall, floors, complete all as specified and directed. |
| 125 | Point wiring with 2 x 1.5 sqmm (as phase and neutral) and 1 x 1.5 sqmm (as earth continuity conductor) multistranded copper conductor cable connected to common earth dolly,1100 volts grade , FRLS, PVC insulated and including PVC casing caping of suitable size with accessories and PVC boards of appropriate sizes and all requisite accessories complete for the followings:- |
| 126 | One light controlled by one switch complete all as specified and directed. |
| 127 | One fan point (Ceiling and Exhaust) controlled by one switch complete all as specified and directed. |
| 128 | One 5 Pin switch socket combination 6 Amp on same board complete all as specified and directed. |
| 129 | One 5 Pin switch socket combination 6 Amp on independent board complete all as specified and directed. |
| 130 | All as per item No.123 above but with two 2.5 sqmm size cable as phase and neutral and one 1.5 sqmm size cable as earth continuity for 15/20 amp multipurpose socket outlet on independent board complete all as specified and directed. |
| 131 | Ceiling rose, 3 terminal, surface bakelite 65 x 50mm complete all as specified and as directed. |
| 132 | Switch piano flush type 6 Amp single pole one way, (ISI marked), complete all as specified and directed. |
| 133 | Electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep complete all as specified and as directed. |
| 134 | Switch socket multipurpose combination 2 in 1, 5 pin, 6 Amp flush type universal,complete all as specifed and directed. |
| 135 | Switch socket multipurpose combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal,complete all as specifed and directed. |
| 136 | LED tube light fittings mirror type with high out put diffuser 2 feet , 20 watt 220 volt AC decorative box type with driver and connecting up with three core flexible copper conducor cable of suitable size from ceiling rose complete all as specified and directed. |
| 137 | Supply and fixed in repair Ceiling mounting LED light fittings luminaire 600mmx600mm, 35/36 watt, 220 v, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver , holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete all as specified and as directed. |
| 138 | S&F in repair LED Lamp, CDL, 10/12 watt, B22 base all as specified and as directed. |
| 139 | Supply and fixed in repair and replacement Lamp holder insulated body all as specified and directed. |
| 140 | S&F in repair and replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 141 | M&L for complete servicing and repair of DG set capacity 62.5 KVAx01,15 KVA x02 including replacement of Engine oil and all types of filters as per manufacturers manual and as directed by Engineer in Charge.NOTES: -(i) Engine oil, oil filter, coolant replacement will be measured and paid separelty under revelant item.(ii) 'B' check shall be carried out by the authorised dealer of kirloskar/ Crompton Greaves and certificate of 'B' check shall be produced by the contractor from authorised dealer of Kirloskar / Crompton Greaves(iii) Testing equipments required for `B' check shall be of contractor's responsibility. |
| 142 | Special engine oil 20 W 40 grade all as recommended by manufacturer for first filling in the new DG sets complete all as specified and directed. Make : Kirloskar/ Castrol |
| 143 | Coolant concentrate for filling in radiator of DG set. Make of coolant : Castrol or equivalent make |
| 144 | Cleaning of radiator assy by means of dismentalling from engine completely, flushing out complete old coolant/water ,cleaning by chemical wash , soldering /brazing complete and reassembling the same to the engine for smooth and efficiant functioning all as specified and directed. |
| 145 | Lubricant oil filter element suitable for engine which has to be repaired at site/workshop all as directed by Engineer-in-Charge. |
| 146 | Fuel filter suitable for engine which has to be repaired at site/workshop all as directed by Engineer-in-Charge. |
| 147 | Fuel filter housing suitable for engine which has to be repaired at site/workshop all as directed by Engineer-in-Charge. |
| 148 | Belt suitable for engine which has to be repaired at site/workshop all as directed by Engineer-in-Charge. |
| 149 | Hose for air cleaner including hose clips suitable for engine which has to be repaired at site/workshop all as directed by Engineer-in-Charge. |
| 150 | M&L for complete servicing and repair of Deep Freezer of any capacity, servicing and cleaning of all accessories, oiling of fan motor, checking of wiring connections, and re-fixing in the same in position testing complete all as directed by Engr-in-Charge. (Unsv accessories will be measured and paid seperately under respective items of Sch) |
| 151 | Gas charging required to the System of suitable type R-34/12/32 /R22 or as per existing at site all as specified and directed. |
| 152 | Steel water tubing of 25 mm dia bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in trenches, complete all as specified and directed. |
| 153 | Supply and fixed in repair 25mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified and directed. |
| 154 | Repair and maintenance of unserviceable ceiling fan of 1200mm/1400mm sweep at contractor's work shop, incl dismantling complete the ceiling fan parts, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, bracket, rubber bush, connecting wire, PVC connector, aluminium clamp for rod, bracket, bush rod, greasing/oiling etc assembling, cleaning and testing of ceiling fan as directed.Note: (i) Unserviceable parts as above shall be measured and paid separately under relevant items of Sch 'A' as supply only.(ii) Rewinding of stator will be measured & paid for separately under relevant item of Sch 'A'.(iii) Cost of minor part i.e. Cotterr pin, screws shall be deemed to included in the cost of quoted rate. |
| 155 | Bearing good quality for ceiling fan 1200mm/1400mm sweep ISI marked all as specified and directed. |
| 156 | Gun metal bush for ceiling fan 1200mm/1400mm sweep all as specified and directed. |
| 157 | Capacitor 2.5 mfd ISI marked as specified and directed. |
| 158 | Brass bracket assy for hanging the ceiling fan 1200mm/1400mm sweep all as specified and directed. |
| 159 | 3 core flexible wire 40/.0076, white colour from ceiling rose to fan connector all as specified and directed. |
| 160 | Stator shaft for ceiling fan all as specified and directed. |
| 161 | M&L to removing of old burnt winding of any size , type and rewinding of stator winding with superior quality copper wire with insulationand testing completed all as specified and directed. |
| 162 | M&L for complete servicing and repair of RO Plant of any capacity, servicing and cleaning of all accessories and re-fixing in the same in position,Changing of two nos of jumbo filters, testing complete all as directed by Engr-in-Charge. (Unsv accessories will be measured and paid seperately under respective items of Sch). |
| 163 | Micron cartridge filter sponge suitable for industrial RO plant 4.5\\" x 20\\" of 4 micron complete all as specified and directed. |
| 164 | RO antiscalant chemical minimum 5 liter can complete all as directed by Engineer in Charge. |
| 165 | Supply and fixing in repair and replacement of solar street light fitting of capacity 30 watt having compact and fully integrated design with intelligent features includes a built-in-solar panel, lithium ferro phosphorate (LifePo4)battery. Charge controller and motion sensor the solution complete all as specified and directed. |
| 166 | Supply and fixing in repair and replacement of solar street light fitting of capacity 30 watt having compact and fully integrated design with intelligent features includes a built-in-solar panel, lithium ferro phosphorate (LifePo4)battery. Charge controller and motion sensor the solution complete all as specified and directed. |
| 167 | S&F in repair and replacement electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and directed. |
| 168 | M&L in repair incl taking out old unsv exhaust fan from site and replace with new exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm incl all connecting accessories complete and as directed by engineer-in-charge. |
| 169 | Socket 2 in 1,3 pin ,5 Amps, flush type all as specified and as directed. |
| 170 | Materials and Labour for laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 16 sqmm 4 core all as per IS , specified and directed. |
| 171 | Supply and replacement in repair 1100 Volts grade heavy duty cable PVC insulated aluminum conductor, served with inner sheathing of PVC tape and overall PVC sheathed twin core cable flat or circular of size of aluminum conductor 10 sq mm stranded conductor including taking down old UNSV cable all as specified and directed. |
| 172 | Removing of old burnt fan winding of any size , type and rewinding of stator winding with superior quality copper wire with insulationand testing completed all as specified and directed. |
| 173 | S&F in repair Sheet Metal enclosure for SPN DBs, 8 Ways, Double Door (IP-43), built- in bus bars complete suitable for 240 Volts, AC, 50 Hz complete all as specified and as directed. |
| 174 | S&F in repair and replacement MCBs, SPN, 240 volts, breaking capacity 10 KA, rating 40-63 amps, complete all as specified and as directed. |
| 175 | S&F in repair and replacement MCBs, SPN, 240 volts, breaking capacity 10 KA, rating 6-40 amps, complete all as specified and as directed. |
| 176 | PVC connection heavy duty , nylon braided, suitable for hot water, with brass alloy chromium plated nuts and nylon washers complete of size15mm dia x 450 mm long all as specified and as directed. |
| 177 | Excavation in trenches n.exc 1.50m wide and n.exc 1.50m in depth for foundation etc. and getting out in any type of soil, complete all as specified and directed. |
| 178 | Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick, in any type of soil, complete all as specified and directed. |
| 179 | Removing excavated material (soil) not exceeding 50m and deposition where dircted at a level not exceeding 1.50m above the starting point, all as specified and directed. |
| 180 | Supply and laying Sand cushioning for the purpose of floors and laying of cables including watering and consiolidation. |
| 181 | M&L for brick covering with width equal to length of brick as the mechanical protction to cable with well burned sub class 'B' laid in trenches flat complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
