|
| 1 | M&L for Virified Ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 (Incl Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and stacking serviceable tiles) complete all as specified and directed. |
| 2 | All as per Srl item No. 1.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 3 | M&L for Virified Ceramic tiles 8-10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.42 sqm, but n. exc.1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 (Incl Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and stacking serviceable tiles) complete all as specified and directed. |
| 4 | All as per Srl item No. 3.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 5 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 (Incl Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and stacking serviceable tiles) complete all as specified and directed. |
| 6 | All as per Srl item No. 5.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 7 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 (Incl Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and stacking serviceable tiles) complete all as specified and directed. |
| 8 | All as per Srl item No. 7.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 9 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 300 x 450 x 7 to 8mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles (Incl Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and stacking serviceable tiles) complete all as specified and directed. |
| 10 | M&L for 300 x 300 x 10mm thick heavy duty Ceramic floor tile laid in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 (Incl Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and stacking serviceable tiles) complete all as specified and directed. |
| 11 | M&L for Chequered cement concrete tiles 300 x 300 x 22 to 25mm thick in floor/ path set and jointed and pointed in neat cement slurry with grey cement and pigment laid over and including 15mm thick screed bed in CM (1:4) including dismantling old chequred tile and (Removing debrish and rubbish off the premises and stacking serviceable tiles) complete all as specified and directed. |
| 12 | Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and directed. |
| 13 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 14 | All as per Srl item No. 13.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 15 | M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 16 | M&L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 17 | Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4 Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 18 | Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 19 | Taking down Shutters of any description exc 1 sqm but n. exc 2 sqm each of any description complete all as specified and directed. |
| 20 | S&F 2nd class H/W, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 21 | S&F 35mm thick second class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, moulded on solid (for each side): supplied and fitted to chowkhat complete all as specified and directed. |
| 22 | S&F 35mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. |
| 23 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) complete all as specified and directed. |
| 24 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supply and fixing in opening as per specification and drawing on SSR Part-II, complete all as specified and as directed. |
| 25 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing on SSR Part-II, complete all as specified and directed. |
| 26 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet used instead of Plain colour PVC Sheet & edges will be printed to match with printed sheet reinforced with MS Square tube supply and fixing in opening as per specification and drawing on SSR Part-II, complete all as specified and directed. |
| 27 | S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC Sheet on back face, incl 03 Nos of 100mm size stainless steel butt hinges for each shutter, supplying & fixing in frame at site as per specification & drawing on SSR Part-II, complete all as specified and directed.. |
| 28 | S&F mild steel hold fasts, plain angle cleats for securing purlins and similar small articles conforming to Fe 290 gde E 165 complete all as specified and directed. |
| 29 | S&F galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 30 | S&F 150mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 31 | S&F 115mm size aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 32 | S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 33 | S&F 100mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 34 | S&F 150mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed. |
| 35 | S&F 100mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed. |
| 36 | M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specifed and directed. |
| 37 | M&L for Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specifed and directed. |
| 38 | S&F in repair 25mm bore SS Pipe curtain rods including high quality SS Brackets & SS Decorative dome, suitable for door/ widows curtain with fancy type powder coated SS dooms with SS brackets fitted to each end and fixed to wall and making good etc. complete all as specified and directed. |
| 39 | M&L for 3mm thick sheet glass, ordinary quality and glazing with oil putty and fitted in wooden/ steel window in square n exc 0.5 Sqm in each pane (Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frame glazed with oil putty or fixed with beads) complete all as specified and directed. |
| 40 | M&L for 3mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed. |
| 41 | S&F in repairs Galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete including necessary wooden beading all around complete all as specified and directed. |
| 42 | S&F in repair Vitreous China wash down water closet pan pedestal pattern, white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoging pipe) and flushing pipe, antisiphonage pipe etc. complete all as specified and directed. |
| 43 | S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed. |
| 44 | S&F in repair vitreous china sqatting pan (orissa pattern) size 580mm x 440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, complete all as specified and directed. |
| 45 | S&F in repairs vitreous china, white, wash hand basin, flat back size 550 x 400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed. |
| 46 | S&F Vitreous China under counter basin (Wash basin) size 190 x 550 x 430mm with brass coupling and suitanle Outlet PVC waste pipe complete all as specified and directed. |
| 47 | S&F Vitreous China table top basin (Wash basin) size 380 x 480 x 140mm with brass coupling and suitanle Outlet PVC waste pipe complete all as specified and directed. |
| 48 | S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed. |
| 49 | S&F in repair Grating 100mm dia of CP with or without hole complete all as specified and directed. |
| 50 | S&F in repair 15mm dia bib tap long body cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 51 | S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 52 | S&F in repair 15mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as specified and directed. |
| 53 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket guard & railing 60 cm long complete all as specified and directed. |
| 54 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 55 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re fixing) complete all as specified and directed. |
| 56 | Supply, laying of CPVC 20mm outer dia pipes SDR 13.5 & Plain CPVC SDR 11 fittings fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 57 | M&L for cutting, chases, pinning in block masonry wall for concealed water tubing and making good to facing and pointing in CM 1:3, cutting n. exc. 10 cm girth complete all as specified and directed. |
| 58 | Taking up or down 20mm bore steel tubing and connections, including cleaning for re fixing) complete all as specified and directed. |
| 59 | Supply, laying of CPVC 25mm outer dia pipes SDR 13.5 & Plain CPVC SDR 11 fittings fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 60 | S&F rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position (Including dismantling old PVC water tank) specified in SSR Part-I, complete all as specified and directed. |
| 61 | S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position (Including dismantling old PVC water tank) specified in SSR Part-I, complete all as specified and directed. |
| 62 | S&F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 63 | S&F in repairs two way Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 64 | S&F in repair Toilet paper holder Stainless steel fixed to wall complete all as specified and directed. |
| 65 | S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook complete all as specified and directed. |
| 66 | S&F in repair chromium plated brass wall mixer 2-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand & over head Shower screwd down for 15mm GI bore pipe complete all as specified and directed. |
| 67 | S&F in repair chromium plated brass Central hole basin mixer without popup waste system complete screwd down for 15mm GI bore pipe complete all as specified and directed. |
| 68 | S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed. |
| 69 | S&F in repairs Corner Glass Shelf of Size 320 x 320mm with Silver chromium finished border Oval Range premium quality complete all as specified and directed. |
| 70 | S&F in repair Vitreous China Urinal Pot of size 245 x 320 x 560mm half stall white colour of premium quality including all fittings like CP Coupling, Sprinder etc. complete all as specified and directed. |
| 71 | S&F in repair Brass Bottle Trap 300mm (12\\") Designer wall connection ppipes and wall flange complete all as specified and directed. |
| 72 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed. |
| 73 | M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed. |
| 74 | M&L for preparation of new surfaces pf plastered of walls and applying two coat of distemper oil emulsion incl priming the surface and incl one coat of wall putty complete all as specified and directed. |
| 75 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of ceiling, chajja in CM 1:3 surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 76 | M&L for preparation of newly plastered surface and applying three coats of white wash on ceiling complete all as specified and as directed). |
| 77 | M&L for Rendering 15mm thick on fair faces of brick work or concrete exterior surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed. (Note:- Rate shall be included for necessary scaf folding and safety measures where required at site). |
| 78 | M&L for preparing newly plastered surfaces on exterior wall and applying two coat of cement based paint over one coat of priming the surfaces complete all as specified and directed. |
| 79 | M&L for preparation of old plaster surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 80 | M&L for preparation of new surfaces of plastered of walls and applying two coat of distemper oil emulsion incl priming the surface and incl one coat of thick wall putty complete all as specified and directed. |
| 81 | M&L for preparation of old painted plastered surfaces plaster surfaces and applying two coast of cement based paint on walls complete all as specified and directed. |
| 82 | S&F in repairs 18mm thick factory made PVC Sheet one side pre-laminated sheet kitchen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC Sheet lipping at all four edges using bonding tape etc. complete all as specified and directed. |
| 83 | S&F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc. complete all as specified and directed. |
| 84 | S&F handles 100mm size, cast type, polished bright complete all as specified and directed. |
| 85 | S&F Stainless Steel self closing hinges complete all as specified and directed. |
| 86 | S&F 50 x 15 mm size magnet door catcher for closing for PVC door shutter complete all as specified and directed. |
| 87 | S&F in repair Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (Minimum weight 15 to 25mm to 142 - 455 gms). |
| 88 | S&F in repairs 110mm bore PVC (SWR) pipes single socket in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants complete all as specified and directed. |
| 89 | S&F in repairs 110mm bore PVC (SWR) pipes single socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 90 | S&F in repairs 75mm bore PVC (SWR) pipes single socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 91 | S&F in repairs 75mm bore PVC (SWR) pipes single socket in any length with rubber ring joints with solvent joints laid in trenchs or in floors complete all as specified and directed. |
| 92 | S&F PVC (SWR) Floor trap with grating 75mm including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) in repairs and including waterleak proof treatment complete all as specified and directed. |
| 93 | S&F 75mm bore of pipe PVC (SWR) bends (any radius), diminishing pieces or tapers complete all as specified and directed. |
| 94 | S&F 110mm bore of pipe PVC (SWR) bends (any radius), diminishing pieces or tapers complete all as specified and directed. |
| 95 | S&F 75mm bore PVC (SWR) branch pieces double, (double Y) equal or unequal complete all as specified and directed. |
| 96 | S&F 110mm bore PVC (SWR) branch pieces double, (double Y) equal or unequal complete all as specified and directed. |
| 97 | Dismantling wall/ ceiling boards (fibre pulip, insulation etc) or insulation boards/ slabs complete all as specified and directed. |
| 98 | S&F GI (Cold Rolled) snap grid size of 600mm x 600mm frame work of 24 x 38 x 0.60mm, Tee section (bottom pre coated) and 24 x 24 x 0.5mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and incl S&F white Non Asbestos designer ceiling cement boards 4mm thick complete all as specified and directed. |
| 99 | M&L for providing PVC WALL PANELLING of 5mm thick consisting of panel of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelaminated PVC sheet. The panel & strips shall be density of 600 kg/CBM manufactured by ISO-9001-2015 certified company. The strips should have in their centre a gove of 6mm widht and 1mm depth for sinking the head screws used to fix the strip to the wall vertically at an equal interval of 10 inch between two PVC strips. The PVC strips shall be fixed to the wall using 65mm long MS screws through the groove in the strip by using PVC fasteners the distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall optionally a strips of 5mm thick PVC sheets of width 75mm feathered at the edges shall be stuck at the places where two panels are joined using solvent cement complete all as specified and directed. |
| 100 | M&L for 10-12mm thick decorative plaster of paris false ceiling bending/ mounding as required shape with two coats of plaster emulsion paint over a coat of primer on decoratived surfaces of ceiling including 26 gauge galvanished iron sheet 'C' shaped main member @ 750mm C/C cross member 'U' shape @ 450 mm C/C and perimeter of 'C' shaped GI wire 6mm dia or more or FI 40 x 4mm thick for hanging arrangement with MS suspension fastner spaced @ 450mm C/C in both direction and 'C' member shall be made out of not less than 90mm wide GI sheet strip and side tray as required of approximate size 3.5 mtr height as required at site complete all as specified and directed. |
| 101 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in mass concrete as in foundation filling and mass concrete (Incl Demolition of cement concrete (un-reinforced) in ground floor & paving n. exc 15 cm thickness and removal of debris from site) complete all as specified and directed. |
| 102 | M&L for Providing cement concrete type B-0 1:2:4 (using 12.5mm graded stone aggregate) 25mm thick finished surface rough to receive tiling complete all as specified and directed. |
| 103 | M&L for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4 using flyash bricks (Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc., separation of serviceable materials from the unserviceable, stacking the serviceable materials within 50 M and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50 M as directed by the Engineer in Charge) complete all as specified and directed. |
| 104 | M&L for Brick work with fly ash bricks, straight or curved on plan to any radius built in half brick thick wall in CM 1:4 complete all as specified and directed. |
| 105 | M&L for Machine pressed precast cement concrete coloured interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness M-35 grade laid dry in floor/ path with and including 40mm thick (Compacted thickness) crushed stone sand cushioning complete all as specified and directed. |
| 106 | M&L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 107 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 108 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screw (Incl Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings) complete all as specified and directed. |
| 109 | M&L for rolled section/ hollow tube section as in post, truss, main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connection plates including drilling hole for bolting, connecting to gusset plate etc. complete all as specified and directed. |
| 110 | S&F powder coating anodised aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fitted with frosted louvers and outer side fitted with mosquito proof galvanised wireness including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15mm thick CM 1:4 of fair finishes including filling the holdfast holes with PCC 1:2:4 (12.5mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings, accessories etc. complete all as specified and directed. |
| 111 | S&F of Powder coated aluminum three track sliding shutters consisting two Glazed shutters and one guazed shutters (with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces with brick work and plaster as required at site:-(i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick.(ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm.(iii) Aluminium glazing strip of size 18.2 x 16.66mm.(iv) 4 to 5mm thick float glass superior quality make Modi float for two shutters.(v) IDPE rubber gasket for fixing glass.(vi) Locking cleat per shutter - 01 No.(vii) Two nos sliding rollers per shutter.(viii) Rubber shock absorber 03 No per shutter.(ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter.(x) Fixing screws for frame with wall - 06 No per window. |
| 112 | S&F 5.5mm to 6.5mm thick looking mirror, of selected quality glass fitted to wall with brackets complete all as specified and directed. |
| 113 | S&F glazed/ (5.0mm thick plain/ coloured glass)/ (semi glazed half portion with fixed glass half with particle board) aluminium door powder coated consisting of frame 63mm x 38mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor door shutter consists of top rail size is 83mm x 44mm, bottom rail & lock rail size is 110mm x 44mm & style of door shutter is 83mm x 44mm with handles 2 Nos in each door, hinges has fitted on frame as required fixed with rubber gasket & aluminium beading any No of panels with aluminium handle, locking arrangement, floor spring and floor door stopper incl. necessary joining cleats, glazing clips etc complete (AI. section thickness 2mm) complete all as specified and directed. |
| 114 | Treatement for sunken portion is as follows :-(i) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed.(ii) M&L for providing 12mm dia holes of 40mm deep @200mm c/c at junction of beams and columns as co-ordinal points for inserting/ pouring cement slurry by pressure grouting for sunken floors of toilet, includind sealing the holes with CM 1:3, complete all as specified and directed.(iii) M&L for water proofing plaster for sunken portion in CM 1:3, 20mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement. (iv) M&L for applyin evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces.(v) M&L for PCC 1:7:12 type D2 using 40mm graded stone aggregate as in filling (sunken portion). etc.(vi) M&L for PCC 1:2:4 type B0 using 12.50mm graded stone aggregate, mixed with incl WPC @ 2% by wt. of cement, as sub base, 75mm thick.Note:- above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect. (b) The sunken portion shall be tested for leakage/ seepage/ dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage/ seepage/ dampness is eliminated. (c) Horizontal flat area to be measered. Please Enable Macros to View BoQ information |
